Copyright protection claimed includes all forms of matters of copyrightable materials and information now allowed by
statutory or judicial law or hereinafter granted, including without limitation, material generated from the software
programs which are displayed on the screen such as styles, templates, icons, screen displays, looks, etc.
Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the
copyright laws.
The PaperPort
®
and OmniPage® brand name and logo are registered trademarks of Nuance Communications, Inc.
Kofax® and Virtual ReScan® are registered trademarks, and VRS™ is a trademark of Kofax Image Products, Inc.
2
ISIS® is a registered trademark of EMC
®
Adobe
, Adobe® Acrobat®, Adobe® Reader®, and the Adobe® PDF logo are registered trademarks of Adobe Systems
® Corporation in the United States and/or other countries.
Incorporated in the United States and/or other countries. The Adobe PDF logo will appear in this product’s software, and
full access to Adobe software features is only available if an Adobe product is installed on your computer.
®
Post-It
Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows™ is a trademark and SharePoint
is a registered trademark of 3M in the United States and/or other countries.
Information is subject to change without notice and does not represent a commitment on the part of Visioneer. The
software described is furnished under a licensing agreement. The software may be used or copied only in accordance
with the terms of such an agreement. It is against the law to copy the software on any medium except as specifically
allowed in the licensing agreement. No part of this document may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, or
translated to another language, for any purpose other than the licensee's personal use and as specifically allowed in the
licensing agreement, without the express written permission of Visioneer.
Restricted Rights Legend
Use, duplication, or disclosure is subject to restrictions as set forth in contract subdivision (c)(1)(ii) of the Rights in
Technical Data and Computer Software Clause 52.227-FAR14. Material scanned by this product may be protected by
governmental laws and other regulations, such as copyright laws. The customer is solely responsible for complying with
all such laws and regulations.
Changes are periodically made to this document. Changes, technical inaccuracies, and typographic errors will be
corrected in subsequent editions.
•Environmental Health and Safety Contacts on page 16
1
Xerox® DocuMate® 4830
User’s Guide
9
Safety Introduction
Notices and Safety
Please read the following instructions carefully before operating the machine and refer to them as needed to ensure
the continued safe operation of your machine.
Your Xerox product and supplies have been designed and tested to meet strict safety requirements. These include
safety agency evaluation and certification, and compliance with electromagnetic regulations and established
environmental standards.
WARNING:
The safety and environment testing and performance of this product have been verified using Xerox materials only.
Unauthorized alterations, which may include the addition of new functions or connection of external devices, may
impact the product certification. Please contact your Xerox representative for more information.
10
Xerox® DocuMate® 4830
User’s Guide
Operational Safety Information
Your Xerox equipment and supplies have been designed and tested to meet strict safety requirements. These
include safety agency examination, approval, and compliance with established environmental standards.
To ensure the continued safe operation of your Xerox equipment, follow these safety guidelines at all times:
Do These
•Always follow all warnings and instructions that are marked on or supplied with the equipment.
•Always use materials specifically designated for this product, the use of other materials may result in poor
performance and create a hazardous situation. Do not use aerosol cleaners, they may be explosive and
flammable under certain conditions.
•Always exercise care when moving or relocating equipment.
•Always locate the machine on a solid support surface that has adequate strength to support the weight of the
machine.
•Always locate the machine in an area that has adequate ventilation and room for servicing.
•Always unplug this equipment from the electrical outlet before cleaning.
Note: Your Xerox machine is equipped with an energy saving device to conserve power when the machine is not in
use. The machine may be left on continuously.
Do Not Do These
•Never use a ground adapter plug to connect the equipment to a power outlet that lacks a ground connection
terminal.
•Never attempt any maintenance function that is not specifically described in this documentation.
•Never remove covers or guards that are fastened with screws. There are no operator serviceable areas within
these covers.
•Never locate the machine near a radiator or any other heat source.
•Never override or “cheat” any of the electrical or mechanical interlock devices.
•Never place this equipment where people might step on or trip on the power cord.
Caution: This device is not intended for use in the direct field of view at visual display workplaces.
To avoid incommoding reflections at visual display workplaces this device must not be placed in the direct field of
view.
Xerox® DocuMate® 4830
User’s Guide
11
Electrical Information
Warning - Electrical Safety Information
1.The power receptacle for the machine must meet the requirements stated on the data plate on the rear of the
machine. If you are not sure that your electrical supply meets the requirements, please consult your local
power company or an electrician for advice.
2.The socket outlet shall be installed near the equipment and shall be easily accessible.
3.Use the power cable that is supplied with your machine. Do not use an extension cord or remove or modify the
power cord plug.
4.Plug the power cable directly into a correctly grounded electrical outlet. If you are not sure whether or not an
outlet is correctly grounded, consult an electrician.
5.Do not use an adapter to connect any Xerox equipment to an electrical outlet that lacks a ground connection
terminal.
6.Do not place this equipment where people might step or trip on the power cable.
7.Do not place objects on the power cable.
8.Do not override or disable electrical or mechanical interlock devices.
9.Do not push objects into slots or openings on the machine. Electrical shock or fire may result.
Electrical Supply
•This product shall be operated from the type of electrical supply indicted on the product’s data plate label. If
you are not sure that your electrical supply meets the requirements, please consult your local power company
for advic e.
•Always connect equipment to a correctly grounded power outlet. If in doubt, have the outlet checked by a
qualified electrician.
WARNING: This equipment must be connected to a protective earth circuit.
This equipment is supplied with a plug that has a protective earth pin. This plug will only fit into an earthed electrical
outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace
the outlet.
Disconnect Device
The power cable is the disconnect device for this equipment. It is attached to the back of the machine as a plug-in
device. To remove all electrical power from the equipment, disconnect the power cable from the electrical outlet.
12
Xerox® DocuMate® 4830
User’s Guide
Emergency Power Off
If any of the following conditions occur, turn off the machine immediately and disconnect the power cable(s) from
the electrical outlet(s).
•The equipment emits unusual odors or makes unusual noises.
•The power cable is damaged or frayed.
•A wall panel circuit breaker, fuse, or other safety device has been tripped.
•Liquid is spilled into the machine.
•The machine is exposed to water.
•Any part of the machine is damaged.
Xerox® DocuMate® 4830
User’s Guide
13
Maintenance Information
1.Any operator product maintenance procedures will be described in the user documentation supplied with the
product.
2.Do not carry out any maintenance on this product which is not described in the customer documentation.
3.Do not use aerosol cleaners. The use of cleaners that are not approved may cause poor performance of the
equipment, and could cause a dangerous condition.
4.Use supplies and cleaning materials only as directed in this manual.
5.Do not remove covers or guards that are fastened with screws. There are no parts behind these covers that you
can maintain or service.
6.Do not perform any maintenance procedures unless you have been trained to do them by an authorized local
dealer or unless a procedure is specifically described in the user manuals.
14
Xerox® DocuMate® 4830
User’s Guide
Product Safety Certification
This product is certified by the following Agency using the Safety standards listed:
Standard
UL60950-1 (USA)
CSA 22.2 No. 60950-1 (Canada)
IEC 60950-1
Xerox® DocuMate® 4830
User’s Guide
15
Environmental Health and Safety Contacts
Contact Information
For more information on Environment, Health, and Safety in relation to this Xerox product and supplies, please
contact the following customer help lines:
USA & Canada:1-800-828-6571
Europe:+44 1707 353 434
16
Xerox® DocuMate® 4830
User’s Guide
Welcome
This chapter includes:
•What’s in the Box on page 18
•System Requirements on page 19
•Documentation on page 20
•The Xerox DocuMate 4830 Scanner on page 21
Your new Xerox scanner can quickly scan stacks of documents with the Automatic Document Feeder (ADF), or single
items on the Flatbed glass.
2
Xerox® DocuMate® 4830
User’s Guide
17
What’s in the Box
Before proceeding, check the contents of the box. If items are missing or damaged, contact the dealer where you
purchased the scanner.
Xerox DocuMate 4830
ScannerQuick Install GuideTechnical Support Card
USB CablePower SupplyPower CordWarranty Card
Windows™
Installation Disc
18
Xerox® DocuMate® 4830
User’s Guide
System Requirements
Pentium 4 PC or AMD equivalent with:
•A DVD-ROM drive
•An available Universal Serial Bus (USB) port
•Microsoft
–32-bit Windows XP (Service Pack 1 and 2)
–32-bit or 64-bit Windows Vista (Service Pack 1)
–32-bit or 64-bit Windows 7
–32-bit or 64-bit Windows 8 / 8.1
The scanner is compatible with Service Pack 3 for Windows XP, Service Pack 2 for Windows Vista, and Service
Pack 1 for Windows 7.
•Minimum of 2 gigabyte (GB) of internal memory (RAM)
•350 MB minimum of free hard disk space
A VGA or SVGA Monitor:
•The recommended settings for your monitor are:
–Color quality of 16-bit or 32-bit
–Resolution set to at least 800 x 600 pixels
®
Windows® operating system:
Refer to your Windows documentation for instructions on setting the color quality and resolution for the monitor.
Xerox® DocuMate® 4830
User’s Guide
19
Documentation
The following printed documentation is provided in the box:
•Installation guide—abbreviated scanner setup and installation instructions.
•Technical support card—contact information for technical support and customer service, and a brief overview
of our standard product warranty.
•Warranty card—the warranty card is provided for users in Russia and should be filled in as described on the
card. For all other users, please dispose of this card in paper recycling.
The following soft-copy documentation is available on the installation disc:
•Scanner user’s guide—contains detailed installation, configuration, scanning, and maintenance instructions.
•Nuance PaperPort user’s guide—contains detailed information using the application and managing your
scanned documents.
•Nuance OmniPage user’s guide—contains detailed instructions on using the software, including information
on using Optical Character Recognition to create editable text files from the scanned documents.
•Nuance PDF Converter user’s guide—contains detailed information on using the application to create and
modify PDF files.
20
Xerox® DocuMate® 4830
User’s Guide
The Xerox DocuMate 4830 Scanner
3
Paper Guides
Output Tray
Input TrayControl Panel
41
5
2
ADF CoverScanner Lid
8
67
1
23
4
5
6
7
8
USB PortPaper StopPower Jack
9
9
Input Tray—Holds documents in the Automatic Document Feeder (ADF) for scanning.
Paper Guides—Adjust to support various document widths.
ADF Cover—Pull to open the Automatic Document Feeder.
Scanner Lid—Lift lid to place an item on the flatbed glass for scanning.
Control Panel—OneTouch scanning controls and status light.
•LED Number—Shows the current scan setting for the OneTouch button.
•Destination Selector buttons—Selects the scan setting for the Simplex and Duplex buttons. Press the Up or
•Simplex button—Press to scan single-sided documents.
•Duplex button—Press to scan double-sided documents.
•Power switch—Press to turn the scanner power on or off
Output Tray—Holds documents after being scanned through the Automatic Document Feeder.
Down destination selectors to cycle through the scan settings to select the one you want.
Paper Stop—Holds documents in the output tray.
Universal Serial Bus (USB) Port—Connects the scanner to the computer.
Power Jack—Connects the power cord to the scanner.
Xerox® DocuMate® 4830
21
User’s Guide
22
Xerox® DocuMate® 4830
User’s Guide
Scanner Setup
This chapter includes:
•Unpack and Assemble the Scanner on page 24
•Connect the Scanner Power Cord on page 26
3
Xerox® DocuMate® 4830
User’s Guide
23
Unpack and Assemble the Scanner
1.Remove any shipping tape from the scanner body, input tray, and output tray. Peel off the protective plastic
film from the control panel.
2.Open the automatic document feeder cover and remove any tape or protective foam from inside the feeder.
Close the feeder cover when you are finished.
3.Lift the scanner lid.
24
Xerox® DocuMate® 4830
User’s Guide
4.Remove any tape and protective foam from around or on the flatbed glass.
5.Slide the locking tab to the unlocked position.
6.Close the scanner lid when you are finished.
Xerox® DocuMate® 4830
User’s Guide
25
Connect the Scanner Power Cord
Note: Only use the power supply (HEG42-240200-7L made by HiTron or DA-48M24 made by APD) included with
your scanner. Connecting any other type of power supply may damage your scanner, and will void its warranty.
1.Plug the power supply into the power port on the scanner.
2.Plug the power cord into the power supply and into a wall outlet.
26
Xerox® DocuMate® 4830
User’s Guide
Installation
This chapter includes:
•Before You Begin on page 28
•Install the Software and Connect the Scanner on page 29
•Installing Additional Applications on page 35
•View the User Guides on page 36
•Register Your Scanner on page 37
4
Xerox® DocuMate® 4830
User’s Guide
27
Before You Begin
Please make sure of the following before you begin installation:
•If you are prompted to reboot during installation, please select "No". Finish installing the rest of the software,
then close all open windows and reboot your computer.
•The information in this guide may cover software not provided with the scanner you purchased. Please
disregard any information about the software not applicable to your scanner.
•If your computer has AntiVirus or AntiSpyware software running, you may encounter alerts or messages
during installation asking you to allow the installation to proceed. Although the messages will differ based on
the software your computer is running, in each case you should allow the installation to proceed if that option
is available. Alternatively, you can turn off the AntiVirus or AntiSpyware software before installing your
scanner, but if you do, make sure to turn it back on again when installation is finished.
•If you already have a scanner connected to your computer, it is recommended that you remove that scanner’s
driver program prior to installing your Xerox scanner. You can remove these programs from the Windows
Control Panel. Please refer to the user manual provided with your other scanner hardware for instructions
about removing the driver and software for that unit.
•If your computer is running Windows Vista or later, you may see the Windows User Account Control screen
asking you to confirm system changes. Click the Yes button to allow the installation to proceed.
28
Xerox® DocuMate® 4830
User’s Guide
Install the Software and Connect the Scanner
1.Start Microsoft Windows and make sure that no other applications are running.
2.Insert the installation disc into your computer’s DVD-ROM drive.
The disc automatically starts.
3.The Select Language window opens. Click the drop-down menu arrow and select the language to use. Click OK.
The disc’s Main menu window opens.
Note: If the disc does not start, check the following:
•Make sure the disc drive’s door is completely shut.
•Make sure the disc was inserted in the drive in the proper direction (label side up).
To l a un c h th e d is c ma nu al ly :
•Open the Windows options for your computer’s disc drives.
•Double-click the icon for your DVD-ROM drive.
•The Installation menu for the disc should now open.
If the menu does not open:
•From the list of files on the disc, double-click the file named setup.exe.
Xerox® DocuMate® 4830
User’s Guide
29
4.On the Main menu, select Install software.
5.Make sure the boxes for Scanner Driver and Visioneer OneTouch are selected, as well as any other
applications you want to install.
Note: The software provided with your scanner may differ slightly from the list shown in the window.
6.Click Install now.
30
Xerox® DocuMate® 4830
User’s Guide
Loading...
+ 183 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.