Xerox 2060 IPS, 2060 NPS User Manual

Xerox DocuColor 2060 NPS/IPS

Master Index

721P90601 Version 8.0 October 2002

Xerox Corporation 701 S. Aviation Boulevard El Segundo, CA 90245

material and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen, such as icons, screen displays, looks, etc.

Printed in the United States of America. Publication number: 721P90600 Xerox® and all Xerox products mentioned in this publication are trademarks of

Xerox Corporation. Products and trademarks of other companies are also acknowledged.

Changes are periodically made to this document. Changes, technical inaccuracies, and typographic errors will be corrected in subsequent editions.

Index

Symbols

#copies operator PD 1-9 %%DocumentMedia command, example PJ

4-3 %%XEROX-XIPP command PJ 6-7 %stdin PD 1-31 () (parentheses)

DOS xcat DC 6-15

SunOS/Solaris formmerge DC 6-19 .pfb extension PD 1-6 /var/db/forms directory DC 4-3, DC 6-3 /var/spool/data directory PJ 6-3

File of Files default DC 6-5

generating Po stScript files DC 6-3

storing files DC C-1

Xcat jobs default DC 6-12

Numerics

10Mb/sec twisted pair standard IP 4-15 4 mm cartridge tape drive IP 5-6 4mm cartridge t ape drive, clea ning RM 6-2

A

access level

Cancel Documents command PJ 3-4

Change Document Attributes PJ 1-29

Change Virtual Printer PJ 2-3–PJ 2-4

Copy Virtual Printer PJ 2-4

Create Virtual Printer PJ 2-2

Delete Virtual Printer PJ 2-4

EndOfRun command PJ 5- 4–PJ 5-7

EndOfSet command PJ 5-6–PJ 5- 7

Forward Document command PJ 3-5

Hold Documents PJ 3-6

List Documents PJ 3-7–PJ 3-10

List Virtual Printers PJ 2-5

Promote Docu ment PJ 3-11

Release Documents PJ 3-11

Set Virtual Printer Flags PJ 2-8

Show Document Attributes PJ 1-30

Show Scheduling Policy PJ 3-12 Staple command PJ 5-7 Start PJ 3-13 Start Virtual Printer PJ 2-7

Stop Virtual Printer PJ 2-7 access requirements, delivery IP 6-15 access to printer, remotely

telnet SJ 8-1

Web-based SJ 8-1 access, remote CM 1-4 Account information, Quick Print for

Windows NT 4.0 SJ 6- 24 account information, specifying PJ 1-8 accounting file versions CM 9-2 accounting files

copying to floppy CM 9-8 deleting CM 9-9 maintaining CM 9-1–CM 9-9

purging CM 9-7 accounting information, purging IP 4-10 Active List PJ 3-1 adding Job Ticket PJ 4-2 additional metrics entry PD 1-3 address data, merging DC G-1 addressing, relative PJ 6-1 administrative mode DC 7-9 administrator

accessing commands CM 1-2

changing password CM 1-3 Adobe

Type Manager PD 1-6 Adobe fonts IP 2-6, SO 2-7 Adobe Photoshop DC 9-1 AdobePS drivers

selecting SJ 4-6

submitting print jobs SJ 4-22–SJ 4-38 Advanced Customer Training (ACT) IP B-3,

RM 8-2

Advanced Function Image and Graphics

(AFIG) SO 5-1

CM = Guide to Configuring and Managing the System DC = Decomposition Service and Tools Guide IP = Installation Planning Guide IS = IPDS Solutions Guide PD = Guide to Using PDL PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine Maintenance SJ = Guide to Submitting Jobs from the Client SO = System Overview Guide TG = Troubleshooting Guide

Master Index INDEX-1

INDEX Advanced Function Presentation, see AFP

advanced PostScript options

Windows NT 4.0 (transparent)

compressing graphics SJ 5-72 overview SJ 5-71–SJ 5-76 printing error information SJ 5-73 printing graphics in color SJ 5-73 printing mirror images SJ 5-73 printing negative images SJ 5-73 printing with printer fonts SJ 5-74 specifying format SJ 5-76 specifying halftoning options SJ 5-75 specifying printing resolution SJ 5-75 using substitution tabl e SJ 5-74 using TrueType fonts SJ 5-76

AFP

data flows IS D-1–IS D-7 definition IS 2-1 overview IS 1-1 page origins, modifying IS 4-19 print flows IS D-1–IS D-7 resources IS 2-1–IS 2-3

summary IS 2-1 AFP environment IP 1-8, SO 5-5 AFP Font Coll ection IS 2-3, IS 4-2 AFPDS IS 2-5 AIX print flow IS D-6 APA (all-point s addressabili ty) IS 2-1 Apollo workstation SJ 2-15 AppleTalk PD 1-17

network IP 4-10

zone name, specifying IP 4-10 application examples DC 1-2 applications, customer responsibility IP 4-4 appName subdirectory PJ 6-2 architecture IS 3-4–IS 3-7 arc-to-bezier conversion PD 1-33 AS/400

AFP data flow IS D-5

connections IS 2-11–IS 2-12 AS/400, parameters IP F-21–IP F-28 ASCII greeting message CM 12-4 ASCII input PD 1-22 ASCIIFontName attribute PJ 1-8 ASCIIFontSize attribute PJ 1-8 asynchronous communications PD 1-18

attributes

changing PJ 1-29 description PJ 1-1 methods for selecting PJ 1-3 precedence PJ 1-6 priority in setting PJ 1-6 setting PJ 1-2 showing PJ 1-30 understanding PJ 1-1

virtual printer PJ 2-1 attributes, overview SJ 1-2 .attrs file CM 2-3 automatic highlight color rende ring PJ 1-15 AutoTabShift attribute PJ 1-8 award certificate example DC 4-1, DC 4-7

B

back panel, S un workstati ons IP 2-3, SO 2-4 background form DC 7-2 Background Forms

creating DC 5-1–DC 5-4

cycling DC 5-5–DC 5-8 background menu CM 3-3 background printing, Macintosh

AdobePS driver SJ 4-26

LaserWriter driver ver sion 7.x SJ 4-2

LaserWriter version 8.x SJ 4-14 backing up

site files CM 2-9

virtual printers list CM 2-11

Xerox files CM 2-10 backing up forms DC F-1 Backup Site Files command CM 2-9 Backup Virtual Printers List command CM

2-11 Backup Xerox Files command CM 2-10 banking applic ations, example IS 1-7 banner page

job message

Quick Print for Windows NT 4.0 SJ

6-13, SJ 6-14

Windows NT 4.0 (transparent) SJ

5-61

sender name

Macintosh drivers (transparent) SJ

4-9

CM = Guide to Configuring and Managing the System DC = Decomposition Service and Tools Guide IP = Installation Planning Guide IS = IPDS Solutions Guide PD = Guide to Using PDL PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine Maintenance SJ = Guide to Submitting Jobs from the Client SO = System Overview Guide TG = Troubleshooting Guide

INDEX-2 Master Index

INDEX banner pages CM 4-1

banner pages, Novell PJ 3-18 bar compression CM 2-3, CM 2-5, CM 2-6 BARR/AFP connection IS 2-12 BARR/RJE connection IS 2-9 BCOCA IS 2-4 BCOCA (Bar code Object Content

Architecture) IP 1-8, SO 5-5 benefit book example DC 1-3 bezier PD 1-33 billing

meter

displaying CM 8-8

printing, data CM 8-11

report, printing CM 8-11

billing meter

reading IP 8-6

reporting IP 8-6 billing meters, reporting RM 8-3 binary input PD 1-22 bindery entry PJ 3-16 bitmaps PD 1-4, PD 1-14 BitsPerSample TIFF tag DC E-1 black areas , mapping PJ 1-16 black pixels

GetTiff macro DC 8-5 Blank Back Sides PJ 1-9 blank pages

XCat DC 6-10

XMerge DC 6-5, DC 6-7, DC 6-14, DC

6-18 booting the controller CM 3-2 borders, invisible frame DC 4-7 bounding box padding PD 1-32 break page PD 1-18 broadcast message

utility command CM 2-1

Broadcast Message to All Execs command

CM 2-1

Broadcast mess age to all execs command

CM 2-1 browser based access CM 1-5 BuildProfile option SJ 2-21 bus and tag

channel connection IP 1-5, SO 5-2

ByteCode files

files created DC A-2 proprietary compression DC 5-2 Tiff/G4 format compared DC 3-2

C

cables

IBM channel IP 7-3

locations IP 7-2 calculating throughput DC D-2 calibration

evaluating output CM 15-2

when to perfor m CM 15-1 Cancel Documents command PJ 3-4 canceling commands CM 1-2 capabilities IS 3-8–IS 3-10 cartridge tap e

drive IP 5-6 CCITT

printing speed PD 1-34–PD 1-35

specifications P D 1- 34 CD-ROM

ejecting CM 2-2

installing CM 10-2

installing software updates from CM 2-7

listing files on CM 2-8

printing files from CM 2-8 central processing unit IP 2-3, SO 2-3 Change Administrator Password command

CM 1-3

Change Document Attributes com m and PJ

1-29

Change Imager Parameters command CM

5-30

Change PCL Imager Parameters command

CM 5-34

Change Virtual Printer command PJ 2-3–PJ

2-4

Change virtual printer command

CycleForms attribute DC 5-5–DC 5-8

disposition attribute

examples DC 3-7, DC 4-3 Mask, Form formats DC 3-3–DC 3-6 syntax DC 7-3 Tiff/G4, ByteCode formats DC 3-2 values DC 3-1

overview DC 7-2

CM = Guide to Configuring and Managing the System DC = Decomposition Service and Tools Guide IP = Installation Planning Guide IS = IPDS Solutions Guide PD = Guide to Using PDL PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine Maintenance SJ = Guide to Submitting Jobs from the Client SO = System Overview Guide TG = Troubleshooting Guide

INDEX-3 Master Index

INDEX changing imager parameters CM 5-30

changing password

administrator CM 1-3

operator CM 1-3 changing PCL imager parameters CM 5-34 channel

switching online and offline PJ 3-15 channel attachment s IP E-1–IP E-3, IP E-6,

IP E-7 channel cable con ne ctor b ox IP 1-7, SO 5-4 channel extender IS 2-9 channel interface board IP 1-7, SO 5-4 channel switching PJ 3-15 channel-attached

cables IP 7-3 systems IP 1-7, SO 5-4

chapters, concatenating

DOS xcat DC 6-15 Sun OS/Solaris DC 6-19 Windows XCat DC 6-7–DC 6-12

character

codes PD 1-6

illegal PD 1-18–PD 1-20 characteristics, image PD 1-15 charpath operator PD 1-21 checklists

installation planning IP 4-5 –IP 4-7

network installation IP 4-8–IP 4-14

preinstallation IP 4-8 Chinese fonts PD 1-3 cleaning

4mm cartridge tape drive RM 6-2

touch screen RM 6-2 clearance space IP 6-10–IP 6-14 client workstations

communicating with network SJ 1-5–SJ

1-6

overview SJ 1-1 CMYK default PJ 1-23 code examples, PostScript PJ 6-4 collating, PCL Copy command PD 2-6 color

adding IS 5-1

conditional pr oce ssi ng IS 5-5

data driven IS 1-1, IS 5-3

evaluating output CM 15-2

full IS 5-2 lines and border s IS 5-8 mapping IS 5-3 overlays IS 5-7 shading IS 5-9

when to calibrate CM 15-1 color billing RM 8-5 color calibration SJ 2-21, TG 5-1

procedure CM 15-2

work flow CM 15-5 color driver, Macintosh LaserWriter driver

8.x SJ 4-40 Color images IS 2-5 color in forms DC 3-1, DC 3-6, DC 5-1 color limitations IS C-1 color models, using IS 5-3 color pages in copiers SO 1-7 colors

presentation, matching PJ 1- 14 preset PJ 1- 14 rendering, automatic PJ 1-15 replacing PJ 1-16 saturation

converting PJ 1-14

specifying PJ 1-14 colorTables highlight color rendering PJ 1-14 colorToHighlight rendering PJ 1-14 command

job status SO 4-6 lpq SO 4-6

lpr SO 4-6 command sets IS 3-5 commands

administrator, accessing CM 1-2

Cancel Documents PJ 3-4

canceling CM 1-2

Change Virtual Printer PJ 2-3–PJ 2-4

Configure utility CM 2-19–CM 2-29

control-D PD 1-17–PD 1-22

control-Z PD 1-18–PD 1-22

Copy Virtual Printer PJ 2-4

copying

accounting data to floppy CM 9-8 documents to floppy CM 2-3, CM 2-4,

CM 2-5

logs CM 9-11

CM = Guide to Configuring and Managing the System DC = Decomposition Service and Tools Guide IP = Installation Planning Guide IS = IPDS Solutions Guide PD = Guide to Using PDL PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine Maintenance SJ = Guide to Submitting Jobs from the Client SO = System Overview Guide TG = Troubleshooting Guide

INDEX-4 Master Index

INDEX

Create Virtual Printer PJ 2-2 Delete Virtual Printer PJ 2-4 deleting

accounting files CM 9-7, CM 9-9 fonts CM 10-4 forms CM 11-4

logs CM 9-12 Duplex, PCL PD 2-9 End, combining PJ 5-6 EndOfSet PJ 5-3–PJ 5-4 entering CM 1-1 font installation IP 2-6, SO 2-7 Forward Document PJ 3-5 Hold Documents PJ 3-6 installing

fonts from disk CM 10-2

PCL fonts from disk CM 10-3 job submission IP 4-10 LCDS PD 3-2 licensing CM 2-15–CM 2-18 List Documents PJ 3-7–PJ 3-10 List Virtual Printers PJ 2-5 listing CM 1-1

CDROM fonts CM 10-6

floppy fonts CM 10-6

fonts CM 10-6

logs CM 9-10 listjob SJ 3-13 listq SJ 3-16 lpc (UNIX) SJ 3-35 lpd IP 4-10 lpq (DOS) SJ 3-31 lpq (UNIX) SJ 3-32 lpr SJ 3-19, IP 4-10 lprm SJ 3-33 merge, inserting DC G-7 operator, accessing CM 1-2 PCL Copy PD 2-8–PD 2-9 PCL Paper Source PD 2-12 PJL PD 2-6 print SJ 3-2 printing

font list CM 10-8

font sample CM 10-8

form samples CM 11-3

PCL font sample CM 10-9

Promote Document PJ 3-11 Release Document PJ 3-11 Set IPDS Virtual Printer PJ 2-10 Set Scheduling Policy PJ 3-12 sets, installing PD 3-4 shortcuts CM 1-1 Show Document Attributes PJ 1-30 Show IPDS Virtual Printer PJ 2-10 Show Scheduling Policy PJ 3-13 Start PJ 3-13 Start Virtual Printer PJ 2-7 status IP 4-10 Stop PJ 3-14 telnet CM 1-4 terminating CM 1-2 UNIX command tool IP 4-10

utility CM 2-1–CM 2-13 communications, asynchr ono us PD 1-18 Compatibility fonts IS 4-11 complete media match PJ 4-6 completed sheets PJ 1-21 components

hardware IP 5-6

printer IP 3-1, SO 3-1

printer controller IP 2-1, SO 2-2

printing system IP 1-9 components, curveto PD 1-33 compression

bar CM 2-3, CM 2-5, CM 2-6

ByteCode files DC 3-3, DC 5- 2

quality PD 1-34

TIFF images PJ 6-4 compression tag, TIFF DC 8-5, DC E-1 concatenating chapters

DOS XCat DC 6-15

Sun OS/Solaris DC 6-19

Windows XCat DC 6-7–DC 6-12 conditional processing, adding color IS 5-5 conditioning paper IP A-6–IP A-7, SO A-6–

SO A-7 conditions, print queue PJ 3-1 configuration

choosing remote printer or print server

CM 4-1–CM 4-3

differences between RPRINTE R and

PSERVER CM 4-1–CM 4-3

CM = Guide to Configuring and Managing the System DC = Decomposition Service and Tools Guide IP = Installation Planning Guide IS = IPDS Solutions Guide PD = Guide to Using PDL PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine Maintenance SJ = Guide to Submitting Jobs from the Client SO = System Overview Guide TG = Troubleshooting Guide

INDEX-5 Master Index

INDEX configuration reports

printing CM 2-23 configuration, network IP 1-11 Configure utility

changeable para me te rs CM 2-20

options CM 2-23 Configure utility commands CM 2-19–CM

2-29

configuring

NFS daemon CM 13-2 configuring as PSERVER CM 4-4 configuring as RPRINTER CM 4-5 connections

AS/400 IS 2-11–IS 2-13

mainframes IS 2-7–IS 2-11

RS/6000 IS 2-13–IS 2-15 connections, Ethernet SO 4-4–SO 4-5 connectivity

multiple SO 4-7 consistency

font PD 1-16 consumable supplies tables IP A-9, SO A-9 continuous form, converting IS 4-18 control-D command PD 1-17–PD 1-22 controller

powering on CM 3-2 control-Z command PD 1-18–PD 1-22 conversion

arc-to-bezier PD 1-33

LCDS commands PD 3-2 conversion programs IS B-1–IS B-4 coordinates

device PD 1-1–PD 1-2, PD 1-32

user PD 1-1–PD 1-2, PD 1-39–PD 1-41 Copies attribute PJ 5-11 copies, multiple PJ 5-11 Copy Accounting to Floppy command CM

9-8

copy count

Macintosh drivers

AdobePS SJ 4-24 LaserWriter 7.x SJ 4-9

LaserWriter 8.x SJ 4-13 Quick Print for Windows NT 4.0 SJ 6-11 Windows NT 4.0 (transparent) SJ 5-57

Copy Documents to DOS Floppy command

CM 2-4

Copy Documents to Floppy command CM

2-3

Copy Documents to Tape command CM 2-4,

CM 2-5

Copy IOT Fault Data to Disk command CM

2-18 Copy Logs to Floppy command CM 9-11 copy output PJ 1-9 Copy Virtual Printer command PJ 2-4 CopyCount attrib ute PJ 1-9 copying

documents to diskette CM 2-3 documents to DOS diskette CM 2-4 Documents to Floppy com mand CM 2-3,

CM 2-4, CM 2-5 logs CM 9-11 print-job data CM 9-8 to tape CM 2-4, CM 2-5

copying to diskette CM 2-3 copypage PD 1-16 core interchange fonts IS 4-11 correcting color calibration CM 15-9 Correcting stacking problems TG 7-1 corruption problems

database CM 2-28 software CM 2-26

cover page

AdobePS driver SJ 4-27 Macintosh, LaserWriter 7.x driver SJ

4-10 Macintosh, LaserWriter 8.x driver SJ

4-15

Create Input Profile command CM 6-2 Create Output Profile command CM 6-2 Create Profiles command CM 6-2 Create Virtual Printer command DC 7-1, PJ

2-2 creating print queue, Novell PJ 3-16 creating profiles CM 6-2 current transformation matrix (CTM) PD 1-1 curves PD 1-25, PD 1-33 curveto components PD 1-33 custom fonts IS 4-12 customer responsibilities IP 1-12, IP 4-3–IP

4-5, IP 8-2–IP 8-3

CM = Guide to Configuring and Managing the System DC = Decomposition Service and Tools Guide IP = Installation Planning Guide IS = IPDS Solutions Guide PD = Guide to Using PDL PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine Maintenance SJ = Guide to Submitting Jobs from the Client SO = System Overview Guide TG = Troubleshooting Guide

INDEX-6 Master Index

INDEX customized forms DC 1-2

customized forms, forms

customized DC 1-3 cut sheet, converting IS 4-18 Cycle Exceptions DC 5-8 cycle up time DC D-2, DC D-7 CycleExceptions attribute PJ 1-9 CycleForm value DC 5-5 CycleForms attribute DC 5-5–DC 5-8, PJ 1-9

D

data

adding color IS 5-3

flushing PD 1-21

placement operators PD 3-2–PD 3-3

streams IS 2-5

towers IS 2-6

transfer protocol PJ 3-5 Data 1 fonts IS 4-12 data base mode PD 3-2

See also line mode data cables IP 7-1 data flows

AS/400 IS D-5

mainframe

MVS AFP IS D-1 MVS for remote printer IS D-2 VM IS D-3

VSE IS D-4 PS/2 IS D-5 RS/6000 IS D-6

data streams IP 1-8, SO 5-1, SO 5-5 database

corruption CM 2-28

date, setting CM 7-1 DCF/Script IS 5-8 Decomp DC 1-3 Decomp Service Install Options screen DC

2-1

decomposed forms

directory location DC 4-3, DC 6-3 file formats DC A-1–DC A-4

decomposing Background Forms DC 5-3 decomposing time

reducing PJ 5-13

Decomposition Service

application examp les DC 1-2–DC 1-4 benefits DC 1-1, DC 1-6 examples DC G-1–DC G-7 installing

DOS DC 2-2 overview DC 2-1 Windows DC 2-1

overview DC 1-1

Decomposition Service Tools, installin g SJ

2-6, SJ 2-15

default

font PD 1-3 user coordinate system PD 1-39–PD

1-41 default color rendering PJ 1-20 default Grayscale PJ 1-23 default router IP 4-9 default settings

resetting job ticket

Quick Print for Windows NT 4.0 SJ

6-8

Windows NT 4.0 ( transparent SJ 5-55

defaults

Jog command PJ 5-10 media specifications PJ 4-2 media values PJ 4-2 media, setting CM 5-2 options, listing CM 5-28

scheduling policy PJ 3-12 defining forms, Novell PJ 2- 9 definitions, nonstanda rd PD 1-11–PD 1-12 definitions, see sample printer definitions Delete Accounting command CM 9-9 Delete Color Calibration comm and CM

15-10, CM 15-11 Delete Fonts command CM 10-4 Delete Form command DC 7-4 Delete Forms command CM 11-4 Delete Logs command CM 9-12 delete output pro file command CM 6-3 Delete Virtual Printer command DC 7-4, PJ

2-4 deleting

accounting files CM 9-9 fonts CM 10-4 forms CM 11-4, DC 7-4

CM = Guide to Configuring and Managing the System DC = Decomposition Service and Tools Guide IP = Installation Planning Guide IS = IPDS Solutions Guide PD = Guide to Using PDL PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine Maintenance SJ = Guide to Submitting Jobs from the Client SO = System Overview Guide TG = Troubleshooting Guide

INDEX-7 Master Index

INDEX

logs CM 9-12

virtual printers DC 7- 4 Deleting Input|Output profiles CM 6-3 delimiters, EOF PD 1-18–PD 1-20 delimiting PostScript jobs PD 1-17–PD 1-18 delivery instructions, print job SJ 6-14 delivery requirements IP 6-15 demo mode, VIPP PD 3-3 developer IP A-8, SO A-8 Device Control command set IS 3-6 device-dependent operators TG 5-2 devices

coordinates PD 1-1–PD 1-2, PD 1-32

dependent features PD 1-29–PD 1-33 DFA group number PJ 1-10 DFA maximum set size PJ 1-10 DFA support IS 1-2, IS 5-14 diagnostic data, gathering CM 2-18 Diagnostic Lockout feature IS 6-2 diagnostic tools IP 1-13, SO 1-4 dialog box options, customizing Quick Print

for Windows NT 4.0 SJ 6-25

dictionary operators

Execution PD 1-11

IdleTime PD 1-10

Printer PD 1-10–PD 1-11

Server PD 1-9

Status PD 1-10

System PD 1-8

User PD 1-8–PD 1-9 Direct Bus and Tag IS 2-7 directories

forms location

decomposed forms DC 4-3, DC 6-3 non-default DC B-1

installation

Windows DC 2-2

Xcat jobs default DC 6-12 directory

queue PJ 3-17

required, DocuPrint file system PJ 6-3 Disable Modem command CM 2-31 Disable Remote Shell command CM 2-32 disk space, installation requirements SJ 2-1 diskette

copying documents to CM 2-3

copying documents to DOS CM 2-4 ejecting CM 2-2 formatting CM 2-2 installing licenses from CM 2-17 installing software updates from CM 2-7 listing files on CM 2-3 printing documents from CM 2-9

diskettes IP A-8, SO A-8

contents, listing CM 2-3 ejecting CM 2-2

formatting CM 2-2 Display Billing Meters command CM 8-8 display monitor IP 5-6 displaying

date CM 7-1

logs CM 9-10

PDL code CM 2-6

time CM 7-1 displaying PDL code CM 2-6 displaying virtual printers PJ 2-5 disposition attributes

examples DC 3-7, DC 4-3, DC 7-3

Mask, Form formats DC 3-3–DC 3-6

Tiff/G4, ByteCode formats DC 3-2

values DC 3-1, DC 7-3 dividing print jobs PJ 5-1 document attributes PJ 1-1 Document Feeding and Finishing

Architecture, see DFA Document Structure Editor (DSE) DC 9-1 Document Structuring Conventions (DSC)

PJ 4-2 document types IS 1-8 documentation IP C-1

AS/400 IP F-28 IBM channel connections IP 7-3

MVS references IP F-20 DocumentID attribute PJ 1-11 DocumentName attribute PJ 1-11 documents

attributes PJ 1-1

changing PJ 1-29 list PJ 1-2 see also attributes showing PJ 1-30

cancelling PJ 3-3

CM = Guide to Configuring and Managing the System DC = Decomposition Service and Tools Guide IP = Installation Planning Guide IS = IPDS Solutions Guide PD = Guide to Using PDL PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine Maintenance SJ = Guide to Submitting Jobs from the Client SO = System Overview Guide TG = Troubleshooting Guide

INDEX-8 Master Index

INDEX

changing full color to highlight color SJ

6-19

Decomp Service examples DC 1-1–DC

1-4 forwarding PJ 3-3 holding PJ 3-3 ID number, determining PJ 1-29 ineligible PJ 3-8 listing PJ 3-7–PJ 3-10 master DC 4-1 promoting PJ 3-3, PJ 3-11 releasing PJ 3-3 scheduling PJ 3-12 stapling

long PJ 5-9 order PJ 5-10

status, determining PJ 3-7–PJ 3-10

DocuPrint NPS Setup window

Quick Print for Windows NT 4.0

accessing SJ 6-9 image shift SJ 6-12 imaging and job setup options SJ

6-10–SJ 6-13 job notes SJ 6-13–SJ 6-14 paper stocks SJ 6-15–SJ 6-17

Windows NT 4.0 (transparent)

advanced PostScript options SJ

5-71–SJ 5-76 copy count SJ 5-57 finishing features SJ 5-59 highlight color SJ 5-67–SJ 5-71 image shift SJ 5-58 job notes SJ 5-59–SJ 5-61 overview SJ 5-56 page orientation SJ 5-57 page range S J 5-57 paper stocks SJ 5-61–SJ 5-64 paper weight SJ 5-58 preferences SJ 5-76 programming, Main Stock SJ 5-58 sides to image SJ 5-57 special pages SJ 5-65–SJ 5-67

DOS

formmrg tool DC 6-13 getg4 tool DC 9-1–DC 9-2 installing Decomp Services DC 2-2

reprint tool DC 6-13 xcat tool DC 6-15 xmerge tool DC 6-14

DOS client software

installing SJ 2-2

removing SJ 2-6 double byte fonts PD 1-3 drilled paper

Quick Print for Windows NT 4.0 SJ 6-16

Windows NT 4.0 SJ 5- 64 drivers, PCL 5c PD 2-17 drivers, Xerox SJ 1-1 drives

cartridge tap e IP 5-6

disk IP 2-3, SO 2-4

DVD-ROM IP 2-3, SO 2-4 dry ink cartridge, replacin g RM 4-2 dry ink distribution PD 1-14 DSE (Document St ructure Editor) DC 9-1 dual feeder IP 6-18 Dual Mode SO 5-1 Dump Accounting command CM 9-7 duplex

color SO 1-7 Duplex commands, PCL PD 2-9 duplex printing PJ 5-11, PD 2-8

specifying

Windows NT 4.0 (transparent) SJ

5-57 duplexing with Mul ti Se t PJ 5- 11 DVD-ROM drive IP 2-3, SO 2-4 dynamic media, setting PJ 4-5–PJ 4-6 dynamic plex changes PJ 7-2

E

EarlyStaple option PJ 5-9 EBCDIC PD 3-2 edge deletion SJ 4-40 eexec operator PD 1-8 Eject CD-ROM command CM 2-2 Eject CDROM command CM 2-2 Eject Floppy command CM 2-2 ejecting a CD-ROM CM 2-2 ejecting a diskette CM 2-2 electrical

specifications IP 5-1–IP 5-3, IP 6-1

CM = Guide to Configuring and Managing the System DC = Decomposition Service and Tools Guide IP = Installation Planning Guide IS = IPDS Solutions Guide PD = Guide to Using PDL PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine Maintenance SJ = Guide to Submitting Jobs from the Client SO = System Overview Guide TG = Troubleshooting Guide

INDEX-9 Master Index

INDEX elevator tray fault DC D-7

ElideHeader attr ibute PJ 1-11 Elixir products IS 4-3–IS 4-5 embedding imag es PD 1-34, PD 1-43 Enable Modem command CM 2-30 Enable Remote Shel l com m and CM 2-31 enabling

lpr security option CM 12-5 EndOfRun command PJ 5- 4–PJ 5-7 EndOfSet command PJ 5-3–PJ 5- 4, PJ 5-6–

PJ 5-7

engine

write-black PD 1-15–PD 1-16, PD 1-26

write-white PD 1-15–PD 1-16 enhancement, resolution PD 1-12–PD 1-16 entering commands CM 1-1 Enterprise Printing Option IS 3-3 entry, bindery PJ 3-16 environmental requirements IP 6-5 EOBs, printing IS 1-8 EOF delimiters PD 1-17–PD 1-20 eofill TG 5-4 erasepage operator PJ 5-2 error

limitcheck PD 1-31

undefined command PD 1-18 error condition, restarting printer TG 7-4 error handling SJ 4-18, SJ 4-30 error messages, Client Software installation

TG 2-2 error page DC 6-5 , DC 6-14, DC 6-18 ESCON connection IS 2-8 estimates, rough performance DC D-2 Ethernet

AS/400 IS 2-12 configurations using IP 1-5, SO 5-2 connections SO 4-4–SO 4-5 description SO 4-6 framing type IP 4-12 mainframes IS 2-10 requirements IP 4-15

RS/6000 IS 2-14 Examine Document com mand CM 2-6 Example DC 7-6 Excel, Microsoft DC 4-4 exception pages

Quick Print for Windows NT 4.0 SJ 6-21–

SJ 6-22 ExceptionPages attribute PJ 1-11 Execution Dict ionary operators PD 1-11 exitserver operator PD 1-20, PD 1-22 explanation of benefits, see EOBs extensions, proprietary PostScript PD 1-16

F

fast scan direction PD 1-35, PD 1-38 fax resolution PD 1-34 FDOCA IS 2-4 features, device dependent PD 1-29–PD

1-33 feedback, job status SO 4-5–SO 4-6 feeder tray attributes, setting CM 5-4 feeder trays IP 3-14, SO 3-15 feeder, establishing PJ 4-1 feeding optio ns IS 5-14

specifications IS A-3 fields, form references DC 8-7–DC 8-9 file

name, static form DC G-7

PPD PD 1-28–PD 1-29 file formats, decomposed f orms DC A-1–DC

A-4

file locks

setting maximum CM 4-6 File of Files

different directories DC B-1

multiple print jobs (Windows XC at) DC

6-11 XCat DC 4-9–DC 4-11 XMerge DC 4-11 –DC 4-13, DC 6-5

file operator PJ 6-1, PD 1-31 file server IP D-13 file server support CM 4-6 filename extensions

.pg DC A-1 .tif DC A-1

filenames, File of Files

carriage returns DC 4-13 space character DC 4-11, DC 4-13

files

accounting, maintaining CM 9-1–CM 9-9 backing up CM 2-9

CM = Guide to Configuring and Managing the System DC = Decomposition Service and Tools Guide IP = Installation Planning Guide IS = IPDS Solutions Guide PD = Guide to Using PDL PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine Maintenance SJ = Guide to Submitting Jobs from the Client SO = System Overview Guide TG = Troubleshooting Guide

INDEX-10 Master Index