Xerox 165-175 User Manual

65 images per minute (ipm) letter 75 images per minute (ipm) letter
(8.5 x 11"/216 x 279 mm/A4) (8.5 x 11"/216 x 279 mm/A4)
49 ipm legal 49 ipm legal
(8.5 x 14"/216 x 356 mm) (8.5 x 14"/216 x 356 mm)
42 ipm ledger 42 ipm ledger
(11 x 17"/279 x 432 mm/A3) (11 x 17"/279 x 432 mm/A3)
2.9 seconds 2.9 seconds
®
Pro 165/175
Intel
®
Celeron®433 MHz
128 MB RAM
Minimum 9.1 GB
PostScript
®
3 emulation
PCL
®
6 (PCL 5e) emulation TIFF (6.0 Old JPEG and New JPEG) TIFF Fax Extended (TIFF-FX) PDF LCDS, SCS, XES and IPDS through third-party transforms
PostScript emulation: 600 x 600 and 1200 x 1200 dpi for 128 or 256 levels of gray PCL emulation: 600 x 600 dpi
OUTPUT SPEED—printing and copying
FIRST-IMAGE-OUT TIME—letter size, from platen to offsetting catch tray
NETWORK PRINTING—SMart Network Controller
Processor
Memory
System Disk
Printer Languages (auto switching)
NETWORK PRINTING—resolution, printing via CentreWare®software
WorkCentre®Pro 165/175
1
Detailed Specifications
WorkCentre Pro 165 shown with Duplex
Automatic Document Feeder, High-Capacity
Feeder and Office Finisher Option.
WorkCentre Pro 175 shown with Duplex
Automatic Document Feeder, High-Capacity
Feeder and Advanced Office Finisher option.
WorkCentre Pro 175 shown with Duplex
Automatic Document Feeder, High-Capacity
Feeder and Professional Finisher option.
WorkCentre®Pro 165 WorkCentre®Pro 175
Advanced Multifunction System Advanced Multifunction System
NETWORK PRINTING—printing features*
PRINT PROTOCOLS AND NETWORKS
Physical
Operating Systems
Network Protocols
WorkCentre®Pro 165/175 Advanced Multifunction Systems
Edge-to-edge printing Secure print Delay print (specific time) Sample set Booklet creation Cover selection Paper selection by attribute Multi-up Stapling (single, dual, multiposition) Saddle-stitch booklet making (with Professional Finisher) Output tray selection Watermark Fit to new paper size Transparency interleave Banner sheet enable/disable Hole punching Image quality Save and recall driver settings
Ethernet 100BaseT/10BaseT, 10Base2, 10Base5 via adapter USB 1.1 port (optional) Wireless ethernet (IEEE 802.11b) via third-party adapters
Microsoft
®
Windows®95, 98, Millennium®(Me), NT®4.0, 2000, XP®, Windows Server 2003 Citrix Novell
®
NetWare®4.x, 5.x, 6
Mac OS
®
8.x, 9.x, OS X
Solaris
®
2.5.1, 2.6 and higher
HP-UX
®
10.2, 11.x
IBM AIX
®
4.2 and higher
Linux
®
Intel
®
—Red Hat
®
—Caldera
®
—MandrakeTM(LPRNG printing infrastructure) —Corel
®
(i386)
—TurboLinux
®
(i386)
—SuSE
®
(i386) Linux Power PC
®
—TurboLinux Server 6.0.2
TCP/IP: Internet Printing Protocol, LPR/LPD, Raw Socket Printing/Port 9100, NetBIOS, HTTP Netware: Bindery and NDS IPX/SPX, NDPS
®
/NEPS (with Server Gateway)
AppleTalk
®
: EtherTalk
®
Microsoft Windows Networking over IP and NetBEUI
*Not all features are available in every driver.
2
WorkCentre®Pro 165/175
Continued
*Enhanced: Xerox custom graphical user interface.
** Standard: Driver based on Microsoft tree-structure user interface (includes Xerox features and functionality).
WorkCentre®Pro 165/175 Advanced Multifunction Systems
DHCP, BOOTP, SNMP, WINS, DDNS, SLP
®
v2, HTTP, RARP, DHCP Autonet
PostScript 3: 136 PostScript standard fonts PCL: 80 scalable fonts, line printer and bitmap format line printer fonts Font Management Utility for downloading additional fonts
Environment PCL5e PCL 6 PostScript
Windows 95/98/Me Bidirectional Bidirectional Bidirectional
enhanced* enhanced* enhanced*
Windows NT 4.0 Bidirectional with user- Bidirectional enhanced Bidirectional with user-
selectable interface selectable interface (standard** and (standard** and enhanced) enhanced)
Windows 2000/XP, Bidirectional Bidirectional Bidirectional Windows Server 2003 with user-selectable with user-selectable with user-selectable (Microsoft certified) interface (standard interface (standard interface (standard
and enhanced) and enhanced) and enhanced)
Macintosh
®
System N/A N/A Generic PPD
8.x, 9.x, OS X
Macintosh System 9.x N/A N/A Bidirectional via AppleTalk
Environment PCL PostScript
Solaris 2.4, 2.5.1, 2.6 and higher; Submission Tool only Submission Tool with full feature IBM AIX 4.2 and higher; LPRNG set (includes administration, printing infrastructure; Linux Intel GUI/TTY print driver and and Linux Power PC software installation)
TIFF/PDF: Supported in Windows Submission Tool for any TIFF or 95/98/Me/NT 4.0/2000/XP, PDF file Windows Server 2003
PRINT PROTOCOLS AND NETWORKS
Continued
Administration Protocols
Fonts
Print Drivers
Print Submission Tools
3
WorkCentre®Pro 165/175
4
WorkCentre®Pro 165/175
WorkCentre®Pro 165/175 Advanced Multifunction Systems
SNMP Version 1 and SNMP Version 2c trap over TCP/IP and IPX MIB access (IETF-MIB II RFC 1213), host resources MIB RFC 2790, Printer MIB RFC v.2
Allows simple remote installation setting of configuration options and management of the device
A Web-based server application for network administrators that permits Web browser-based
device management from any workstation, whether running Windows, UNIX or any other operating system. Works with any SNMP-managed printer from any manufacturer. Provides help with device discovery and installation, health checks and troubleshooting, and device upgrades,
as well as basic accounting and asset management. Requires Windows XP or 2000 (Professional or Advanced Server) and Internet Explorer 5.01 and higher
Server gateway application: centralized management tool.
Provides added identification to the general discovery performed by Unicenter TNG and the ability to see the WorkCentre Pro under a Unicenter TNG Business Process View.
Provides for the identification of Xerox N-Series printers and WorkCentre Pro multifunction devices in the general discovery performed by Tivoli NetView.
CentreWare MC Snap-in supports printer discovery and management via a Microsoft Management Console (MMC) link to an embedded Web Server in NT and Windows 2000 environments.
Provides for the identification of Xerox N-Series printers and WorkCentre Pro multifunction devices in the general
discovery performed by HP OpenView. Provides traps and message updates to the OpenView alarm browser and the ability to launch CentreWare Internet
Services for device management directly from OpenView.
Plug and Print 2000 (PnP2000) is an administrative service program that simplifies enterprise-wide printer installs and relocations for Windows 2000 environments. The product discovers devices, automatically installs devices, enables sharing printers to users and provides install reports—all through a user-friendly interface.
Enables intelligent PostScript printing on Xerox multifunction printers by storing Xerox software as well as the barcode fonts on the printer hard disk. Enables the printing of barcodes from any application (client or mainframe) that supports PostScript printing. Automatically calculates the check digit, places start/stop and middle bar characters in the data string, compresses and encodes the data string, and rotates the barcode through 90 or 270 degrees.
Simplifies printing in SAP R/3 environments by providing users of SAP R/3 v4.6C, 4.x and 3.x ERP applications with enhanced WorkCentre Pro printing functionality. (PostScript and PCL): —Simplex or duplex printing —Finishing—single or dual stapling —Tray pull location from any tray —Print security via PIN ID capability at the WorkCentre Pro
Provides built-in process intelligence that allows the printing of barcodes on any appropriately configured PostScript printer on the SAP R/3 4.x (or higher) network. Used in conjunction with Xerox PostScript Device Types for SAP R/3 Environment and Xerox Font Center Barcode Fonts. Utility enables automated checksum calculation, placement of start/stop characters, encoding of data string, and data compression.
DEVICE MANAGEMENT
Management Support
Xerox CentreWare
®
Internet Services
Xerox CentreWare
®
Web
Novell NDPS/NEPS (gateway for WorkCentre Pro)
Xerox CentreWare
®
for Unicenter TNG
®
Xerox CentreWare
®
for Tivoli®NetView
®
Xerox CentreWare®MC for Microsoft Management Console (MMC)
Xerox CentreWare
®
for HP®OpenView
®
Xerox Plug and Print 2000
Xerox Barcode Pro PS (optional) Purchase via
www.font.net
Xerox Device Types for SAP R/3 Environment
Xerox SAP R/3 Intelligent Barcode Utility (optional)
Purchase via www.font.net
WorkCentre®Pro 165/175 Advanced Multifunction Systems
Web server embedded on SMart network controller
—Tray status/contents —Consumables status
Complete job print queue management—hold, release, promote and delete
Print-ready files (PS, PCL, TIFF, PDF) Output feature selection
Allows simple, remote installation setting of configuration options and management of the device
Windows XP, 2000/NT 4.0/Me/98/95: Netscape Navigator
®
4.x and above, Microsoft Internet Explorer 4.x and above Macintosh 9.x/OS X: Netscape Navigator 6.x Linux: Netscape
®
Navigator 6.x
Scan while the system is printing copy or network print jobs, or while it is transferring scan-to-network or fax jobs
Scan at 75 ipm (letter/8.5 x 11"/216 x 279 mm/A4 long edge feed [LEF]) at all resolutions
600 x 600 dpi 400 x 400 dpi 300 x 300 dpi 200 x 200 dpi
11.7 x 17"/297 x 432 mm
Optional secure device login with network user name and password Supports Kerberos (Windows 2000/UNIX/Windows Server 2003), SMB (Windows NT 4.0/Windows 2000/Windows Server 2003), or Novell NetWare 4.x/5.x/6.x Optional PIN-based guest login
Novell (NCP via IPX/SPX) FTP via TCP/IP Microsoft SMB via TCP/IP
TIFF 6.0 with G3 MH, G4 MMR or JPEG compression (single page or multiple pages) PDF (image only) with G3 MH, G4 MMR or JPEG compression
One to six user-programmable metadata fields per scan job Customized fields viewed on WorkCentre Pro user interface Variable data entered using virtual keyboard at WorkCentre Pro
Scan to network server Scan to remote e-mail destinations via direct SMTP addresses or via various network scanning software options Scan to application (Electronic Document Management System/Repositories) Scan to Microsoft Exchange 2000 Web Folders Scan to Web URL Scan to remote printer Scan to PC Desktop
(Standard and Deluxe editions)
Scan to Windows XP client via WIA (Windows Image Acquisition)
CENTREWARE
®
INTERNET SERVICES—integrated device Web page
Device Status
Print Queue Viewing
Job Submission
Device Administration
Browsers
NETWORK SCANNING (optional)
Concurrency
Input Speed
Resolutions
Maximum Scan Area
Authentication
Network Protocol
File Formats
Document Management Fields
Supported Scan Destinations (Varies by scanning software
options purchased)
5
WorkCentre®Pro 165/175
6
WorkCentre®Pro 165/175
NETWORK SCANNING SOFTWARE OPTIONS
Network Scanning With E-Mail
FreeFlow SMARTsend
Scan-to-PC Desktop Standard
WorkCentre®Pro 165/175 Advanced Multifunction Systems
Network Scanning – Enables device-specific network scan workflows (destination templates) to be easily created and
edited via CentreWare Internet Services. Enables network scanning to the following destinations: — Scan to network directory — Scan to e-mail distribution — Scan to Xerox or third-party applications — Scan to Windows XP client (requires WIA driver downloadable from xerox.com)
E-mail (included with Network Scanning Option)
Capability
Direct document e-mail from device Manual address entry or directory (Exchange/Notes
/LDAP) address searching
Resolutions
600 x 600 dpi 400 x 400 dpi 300 x 300 dpi 200 x 200 dpi
Maximum Scan Area
11.7 x 17"/297 x 432 mm/A3
Network Protocol
SMTP, MIME encoded
Authentication
Optional secure device login with network user name and password Supports Kerberos (Windows 2000/UNIX/Windows Server 2003), SMB (Windows NT 4.0/Windows 2000/Windows Server 2003), and Novell
®
NetWare 4.x/5.x/6.x
Optional PIN-based guest login
Directory Access
Supports corporate address list via LDAPv3 (Exchange/Notes/e-Directory) Downloaded address list (comma-separated file format)
File Formats
TIFF 6.0 with G3 MH, G4 MMR or JPEG compression (single page or multiple pages) PDF (image only) with G3 MH, G4 MMR or JPEG compression
— A server-based document capture, transformation, conversion and routing software that supports multiple
scan-enabled multifunction devices — Enables conversion of scanned documents into a variety of industry standard formats — Workflow creation via web browser Wizards
(destinations, document attributes, workflow settings, workflow summary) — Workflow initiation via device scanning User Interface (template selection at device UI) — Destinations: E-Mail, FTP, Microsoft Network Folder, NetWare Folder, Microsoft Exchange 2000 Web Folders,
Web URL, Remote Printer — Document Repository Destinations: DocuShare, Domino, Domino.Doc, Microsoft SharePoint
— A desktop and server-based offering that provides document imaging, archiving, editing and organization tools — ScanSoft PaperPort SE 2.0 – image viewing and file management software — ScanSoft OmniPage SE 1.0 (for Distribution Server installation) and ScanSoft OmniPage SE 2.0
(for desktop/client installation) – OCR and file format conversion software — Image Retriever – provides fully automated retrieval of scanned images direct from a scan enabled Xerox WorkCentre
Pro to individual desktops.
Continued
7
WorkCentre®Pro 165/175
Continued
NETWORK SCANNING SOFTWARE OPTIONS
Scan-to-PC Desktop Deluxe
INTERNET FAX (optional)
Capability
Maximum Scan Area
Authentication
Address Directory Access
File Formats
Resolutions
Network Protocols
Compliance
NETWORK FAX SERVER INTEGRATION (optional)
Fax Send Features
WorkCentre®Pro 165/175 Advanced Multifunction Systems
— A desktop and server based offering that provides document imaging, archiving, editing and organization tools — ScanSoft PaperPort Pro 9.0 Office – image viewing and file management software — ScanSoft OmniPage Pro 11.0 (for Distribution Server installation) and ScanSoft OmniPage Pro 12.0 Office
(for desktop/client installation) – OCR and file format conversion software — Image Retriever – provides fully automated retrieval of scanned images direct from a scan enabled Xerox WorkCentre
Pro to individual desktops. Also includes an e-mail inbox polling capability.
Direct document transmission to remote Internet Fax machines or e-mail clients (SMTP) Reception and automatic printout of documents sent via e-mail from remote Internet Fax machines or e-mail clients
11.7 x 17"/297 x 432 mm/A3
Optional secure device login with network user name and password Supports Kerberos (Windows 2000/UNIX/Windows Server 2003), SMB (Windows NT 4.0/Windows 2000/Windows Server 2003), and Novell Netware 4.x/5.x/6.x Optional PIN-based guest login
Corporate address list via LDAPv3 Downloaded address list (comma-separated file format)
TIFF-FX profiles S, F with G3 MH or JPEG compression PDF (image only) with G3 MH, G4 MMR or JPEG compression
600 x 600 dpi 400 x 400 dpi 300 x 300 dpi 200 x 200 dpi
SMTP POP3 (RFC 1939)
ITU-T T.37 compliant
Provides walk-up faxing and hard-copy output of received faxes when integrated with fax-server applications (fax server and software must be purchased separately from supplier). Transmission speeds, number of lines, compatibility and compression are dependent on fax server configuration.
One- or two-sided scanning (up to ledger/11 x 17"/279 x 432 mm/A3) Phone number entry Add to send list (50 numbers maximum) Delay send (specific time) Resolution selection (fine, standard) Image quality selection (normal, text, halftone photo, photo, background suppression, seven levels of contrast, seven levels of sharpness
Continued
8
WorkCentre®Pro 165/175
WorkCentre®Pro 165/175 Advanced Multifunction Systems
One- or two-sided printing Quantity Staple on/off Collate on/off Secure print on/off Finisher output tray selection (top tray or main tray)
Optional secure device login with network user name and password Supports Kerberos (Windows 2000/UNIX/Windows Server 2003), SMB (Windows NT 4.0/Windows 2000/Windows Server 2003), and Novell NetWare 4.x/5.x/6.x Optional PIN-based guest login
Multiple vendors, certified by the Xerox Business Partners Program. For details, visit www.xerox.com
ITU (CCITT) Group 3 quality/resolution of 600 x 600, 300 x 300, 200 x 200, 200 x 100 dpi
V.34 modem(s): 33,600 bps. Less than four seconds per page transmission time. ISDN via third-party adapter.
MH/MR/MMR/G3/Super G3
Auto fax transmission reduction Page-by-page job status at the machine Fax from platen Delay start Automatic memory resend Automatic cover sheets Priority send Broadcast
One- or two-sided printing, stapled or unstapled Reduction at reception to fit available paper Junk fax prevention
Activity report Broadcasting/Multipoll Dial directory Transmission confirmation Pending fax Mailbox
Up to 200 password-protected mailboxes
Total of 200 speed dials (single-line option) or 1,000 speed dials (dual-line option) Up to 100 dial groups with up to 200 recipients per group (single-line option) Up to 200 dial groups with up to 400 recipients per group (dual-line option) Auto redial Batch send
NETWORK FAX SERVER INTEGRATION (optional)
Continued
Fax Print Features
Authentication
Supported Network Fax Vendors
FAX (optional)
Compatibility
Speed/Modem(s)
Compression/Speed
Fax Send Features
Fax Receive Features
Fax Reports
Fax Receive Mailboxes
Auto Dialing
9
WorkCentre®Pro 165/175
WorkCentre®Pro 165/175 Advanced Multifunction Systems
Duplex Automatic Document Feeder with 75-sheet capacity
1:1, 1:2, 2:2 and 2:1
1 to 9,999
600 x 600 dpi x 8 bit input / 4800 x 1200 dpi output
Concurrent scanning and printing
AutoIQ automatic digital image quality control Auto rotation 180° or 270° when needed Image shift Edge erase Edge-to-edge copying Auto centering Original type selection (normal, text, halftone, photo) Lighter/darker Background suppression Contrast Sharpness Screening
512 MB
Variable zoom from 25% to 400% in 1% increments Anamorphic zoom Six user-programmable percentages
Auto paper select Auto reduction/enlargement to fit selected paper size Auto registration Auto tray switching Automatic job recovery Booklet creation N-up (up to six columns by six rows for 8.5 x 11"/216 x 279 mm/A4) Transparency dividers (blank or printed) Negative image Mirror image Covers insertion (front only, front and back, back only; blank or printed) Build Job (enables special programming for different pages in one document – can be used for inserts,
mixing input from the document glass and document feeder) Page programming of tabs or paper inserts Store and recall job programming Job interrupt Bound document copying (produce multiple sets from stored job segments) Sample set Mixed-size originals Context-sensitive help screens Multiposition stapling with optional Finishers Saddle-stitch booklet making with optional Professional Finisher
Continued
COPYING
Document Scanner
Sides (input:output)
Quantity
Resolution
Concurrency
Digital Imaging
Copy Pre-collation Memory
Reduction/Enlargement
Special Features
10
WorkCentre®Pro 165/175
WorkCentre®Pro 165/175 Advanced Multifunction Systems
Interface to third-party access control devices, coin machines, card readers Supports a variety of vending stations available through the Xerox Custom Application Service
PC interface for upload/download of internal auditron data and customer device administration/software upgrade
Xerox Copier Assistant
Software provides a PC-based alternative to the user interface touchscreen. Used in conjunction with a customer-supplied PC attached via the USB port, this software provides text-to-speech, screen magnification and easy PC keyboard access to basic and advanced copy features.
75 sheets
75 ipm—8.5 x 11"/216 x 279 mm long edge feed (LEF)
Statement/5.5 x 8.5"/140 x 216 mm/A5 LEF or short edge feed (SEF) Letter/8.5 x 11"/216 x 279 mm/A4 LEF or SEF Legal/8.5 x 14"/216 x 356 mm SEF Ledger/11 x 17"/279 x 432 mm/A3 SEF
13 lb to 32 lb bond/50 to 120 gsm
Tw o
550 sheets each
User adjustable from 5.5 x 8.5"/140 x 216 mm/A5 to 11 x 17"/279 x 432 mm/A3
16 lb to 53 lb bond (110 lb index)/60 to 200 gsm
Letterhead Bond Preprinted forms Plain Hole-punched Heavyweight Recycled paper
Copying Continued
Foreign Device Interface (optional)
USB Port
Accessibility Option
PAPER HANDLING—Duplex Automatic Document Feeder
Capacity*
Speed
Paper Sizes Sensed
Weights
PAPER HANDLING—Front-Loading Paper Trays
Number
Capacity*
Sizes
Weights
Types
Continued
*Paper capacities are based on 20 lb/75 gsm stock; capacities will vary with different weight stocks.
*Paper capacities are based on 20 lb/75 gsm stock; capacities will vary with different weight stocks.
11
WorkCentre®Pro 165/175
WorkCentre®Pro 165/175 Advanced Multifunction Systems
100 sheets
4.13 x 5.83"/105 x 148 mm to 11.7 x 17"/297 x 432 mm
16 lb to 57 lb bond (80 lb cover)/60 to 216 gsm
Letterhead Bond Preprinted forms Plain Hole-punched Heavyweight Recycled paper Label stock Transparencies
Two trays: 1,600 and 2,000 sheets
Letter/8.5 x 11"/216 x 279 mm/A4 LEF
16 lb to 53 lb bond (110 lb index)/60 to 200 gsm
4,800 sheets (with Bypass Tray, Front-Loading Paper Trays and High-Capacity Feeder)
300 sheets (Letter/8.5 x 11"/216 x 279 mm/A4)
4.25 x 5.5"/A6 to 11 x 17"/A3
Capacity:* 250 sheets
Capacity:* 2,000 sheets
4.25 x 5.5"/A6 to 11 x 17"/A3
16 lb to 57 lb bond (80 lb cover)/60 to 216 gsm
Single (any corner) and dual Auto stapling (50 sheets maximum) Offline stapling (40 sheets maximum) Statement, letter, legal, A5, A4, A3, 11 x 17" sizes supported
Optional three and two hole punch (North America) Optional two hole and four hole punch (Europe) Optional “Swedish” four hole punch (Europe)
PAPER HANDLING—Bypass Tray
Capacity*
Sizes
Weights
Types
PAPER HANDLING—High-Capacity Feeder
Capacity*
Paper Size
Weights
Total Capacity*
OUTPUT OPTION—Offsetting Catch Tray Option (WCP 165 only)
Capacity*
Sizes
OUTPUT OPTION—Office Finisher Option
Top Tray
Stacking Tray
Sizes
Weights
Stapling
Hole Punching
Continued
12
WorkCentre®Pro 165/175
*Paper capacities are based on 20 lb/75 gsm stock; capacities will vary with different weight stocks.
WorkCentre®Pro 165/175 Advanced Multifunction Systems
Capacity:* 250 sheets
Capacity:* 3,000 sheets (2 x 1,500)
4.25 x 5.5"/A6 to 11 x 17"/A3
16 lb to 57 lb bond (80 lb cover)/60 to 216 gsm
Front, rear, dual, SEF and 4-stitch Auto stapling (50 sheets maximum) Offline stapling (50 sheets maximum) Statement, letter, legal, A5, A4, A3, 11 x 17" sizes supported
Standard three hole punch (North America) Standard two hole punch ( Europe) Optional two hole hole punch (North America) Optional four hole punch (Europe) Optional “Swedish” four hole punch (Europe)
Capacity:* 250 sheets
Capacity:* 1,500 sheets
4.25 x 5.5"/A6 to 11 x 17"/A3
16 lb to 57 lb bond (80 lb cover)/60 to 216 gsm
Front, rear, dual, SEF and 4-stitch Auto stapling (50 sheets maximum) Offline stapling (50 sheets maximum) Statement, letter, legal, A5, A4, A3, 11 x 17" sizes supported
Capacity:* Tray stop up, 30 booklets (one to five sheets per booklet); tray stop down, unlimited Sizes: 8.5 x 11"/216 x 279 mm/A4, 8.5 x 14"/216 x 356 mm, 11 x 17"/279 x 432 mm/A3 Weights: 16 to 53 lb bond (100 lb index)/60 to 200 gsm Saddle-stitch capacity:* 2 to 15 sheets (8 to 60 page booklet) V-Fold capacity:* 1 to 5 sheets (unstapled)
Standard three hole punch (North America) Standard two hole punch ( Europe) Optional two hole hole punch (North America) Optional four hole punch (Europe) Optional “Swedish” four hole punch (Europe)
OUTPUT OPTION—Advanced Office Finisher Option
Top Tray
Stacking Trays
Sizes
Weights
Stapling
Hole Punching
OUTPUT OPTION—Professional Finisher Option
Top Tray
Stacking Tray
Sizes
Weights
Stapling
Booklet Maker
Hole Punching
13
WorkCentre®Pro 165/175
WorkCentre®Pro 165/175 Advanced Multifunction Systems
Up-to-the-minute data on how the WorkCentre Pro system is being used; comprehensive usage tracking and
reporting; print, scan, copy and fax.
Multiple accounting vendors, certified by the Xerox Business Partner program. For details, visit www.xerox.com
Tracks copy usage Supports up to 2,150 user accounts, 5,925 general accounts and 256 group accounts Auditron report printout available Ability to upload/download account and usage data via direct connection using Microsoft
®
Windows-based software
®
Pro 165 WorkCentre®Pro 175
Up to 250,000 Up to 300,000
®
Pro 165/175 Advanced Multifunction Systems
Network Multifunction System with Network Controller, High-Capacity Feeder and Duplex Automatic Document Feeder
One-line fax option Two-line fax option Office Finisher Advanced Office Finisher Professional Finisher Two-hole legal punch option (N. America) Three-hole punch option (N. America) Tw o-hole punch option (Europe) Four-hole punch option (Europe) “Swedish” Four-hole punch option (Europe) Foreign Device Interface Offsetting Catch Tray (WCP 165 only) Network Accounting Enablement Network Scanning With E-Mail Network Fax Server Integration Internet Fax Image Overwrite Security FreeFlow SMARTsend Software Scan to PC Desktop Client Software USB 1.1 Port Xerox Copier Assistant
110–140 V Nominal, 60 Hz, 20A or 220–240 V Nominal, 50 Hz, 10A
ACCOUNTING
Accounting With Third-Party Server Applications (Optional)
Internal Auditron
MONTHLY DUTY CYCLE
BASIC CONFIGURATIONS*
ACCESSORIES
ELECTRICAL REQUIREMENTS
*Features, configurations and options may vary by location.
1
1,789 watts with Office Finisher
1
1,920 watts with Advanced Office Finisher or Professional Finisher
2
360 watts with Office Finisher
2
370 watts with Advanced Office Finisher or Professional Finisher
3
82 seconds with Fax enabled
14
WorkCentre®Pro 165/175
WorkCentre®Pro 165 WorkCentre®Pro 175
1,720 watts
1
1,720 watts
1
350 watts
2
350 watts
2
245 watts 275 watts
95 watts 95 watts
72 seconds
3
72 seconds
3
165 seconds 165 seconds
50° to 90° F (10° to 32° C)
10% to 85%
Width Depth Height Weight
51"/1,297 mm 35"/890 mm 48"/1,230 mm 295 lbs/134 kg
61"/1,556 mm 35"/890 mm 48"/1,230 mm 358 lbs/162 kg
67"/1,697 mm 35"/890 mm 48"/1,230 mm 463 lbs/210 kg
69"/1,762 mm 35"/890 mm 48"/1,230 mm 463 lbs/210 kg
Width Depth Height
79"/2,007 mm 76"/1,930 mm 78"/1,981 mm
89"/2,257 mm 76"/1,930 mm 78"/1,981 mm
95"/2,402 mm 76"/1,930 mm 78"/1,981 mm
97"/2,457 mm 76"/1,930 mm 78"/1,981 mm
POWER CONSUMPTION
Running
Standby
Low Power Mode
Sleep Mode
Warm-up
Ready to Copy Ready to Print
ENVIRONMENTAL CONSIDERATIONS
Required Temperature Range
Required Relative Humidity
DIMENSIONS AND WEIGHTS – including shelf
Configured with OCT (165 only)
Configured with Office Finisher
Configured with Advanced Office Finisher
Configured with Professional Finisher
SPACE REQUIREMENTS (Moveable)
Configured with OCT (165 only)
Configured with Office Finisher
Configured with Advanced Office Finisher
Configured with Professional Finisher
15
WorkCentre®Pro 165/175
© 2004 Xerox Corporation. All rights reserved. XEROX®, CentreWare®, WorkCentre®Pro and Copier Assistant are trademarks of Xerox Corporation. PostScript is a registered trademark of Adobe Systems Incorporated in the United States and/or other countries. Other marks are trademarks or registered trademarks of the companies with which they are associated. In support of Xerox’s environmental leadership goals, these models may contain some recycled components that are reconditioned. ENERGY STAR
®
is a U.S. registered mark. As an
ENERGY STAR
®
Partner, Xerox Corporation has determined that these products meet the ENERGY STAR®guidelines for energy efficiency. Terra Choice Environmental Services, Inc., of Canada has verified that these products conform to all applicable Environmental Choice EcoLogo
requirements for minimized impact to the environment. Product information and/or specifications are subject to change without notice. 12/04 610P720220 W75SS-03UA
Total satisfaction guaranteed.
The exclusive Xerox Total Satisfaction Guarantee, recognized as unique in the industry, covers every Xerox WorkCentre®Pro which has been continuously maintained by Xerox or its authorized representatives under a Xerox express warranty or Xerox Maintenance agreement. You decide when you’re satisfied.
CERTIFICATIONS
SUPPLIES
®
Pro 165/175 Advanced Multifunction Systems
FCC Class A Compliant (U.S.), DOC Class A Compliant (Canada) 89/336/EEC (Europe) UL Listed (UL 1950, Third Edition) CB Certified (IEC 60950/EN 60950) 73/23/EEC (Europe) Novell Tested and Approved Designed for Microsoft Windows Certified 99/5/EEC (Europe)
Description Order Number No. per Box Expected Yield
Toner Cartridge 6R1146 2 45,000 at 6% area coverage
Staple Cartridge (for 50-sheet stapling) 108R493 3 5,000 per cartridge
Staple Cartridge (for Booklet Maker 8R12897 8 (4 x 2) 2,000 per cartridge saddle-stitch stapling) (15 sheet max.)
Loading...