Xerox 155MX, 180MX User Manual

Xerox DocuPrint

155/155MX & 180/180MX

Enterprise Printing Systems and

PowerPlus Series

Specifications

The DocuPrint®Enterprise Printing

System helps you meet mission-critical

deadlines while maintaining a cost-

efficient production environment.

Achieving true efficiency requires

value-added solutions that combine

fast, reliable printers with the right

software and finishing equipment to

match your overall business goals.

The DocuPrint®EPS allows you to

streamline production processes,

shorten turnaround times, and

lower operating costs for the entire

production process.

Impressive speeds—up to 155 or

180 pages per minute—unparalleled

reliability and quality, and all of the

experience from the company that

invented transactional variable data

printing make DocuPrint®155/155MX

and 180/180MX EPS the best choice

to put your document production on

the fast track.

Xerox DocuPrint

155/155MX • 180/180MX Enterprise Printing Systems

For more information on the Xerox DocuPrint® 155/180 Enterprise Printing Systems and PowerPlus Series, call 1-800 ASK XEROX or visit us on the Web at: www.xerox.com

Xerox DocuPrint®155/155MX • 180/180MX EPS Specifications

System Control Module

• Enhanced Sun BladeTMplatform

• DVD-ROM Drive, QIC tape

• Color flat panel display

• Keyboard and mouse

• Ethernet interface (10/100BaseT)

• Controller stand

• 18/36-track tape drive (optional)*

Printer Module

• Xerographic engine with laser raster imaging system

• Prints simplex or duplex

• Monthly duty cycle: up to 4.5 million (DP 155) or 6 million (DP 180) impressions

• Printer control console shows current printer status

• Operator attention light

MICR

(Magnetic Ink Character Recognition)

• Check performance guarantee

• Consistently exceeds 99.5% read rate

• Uniformity—maintain a signal strength across all characters

• Consistency—maintain uniformity from check to check and under a range of environmental conditions

• Durability—maintain image permanence in highspeed readers/sorters

Datastream Support

DocuSP®Common Controller:

• Adobe PostScript®level 3, PDF, HP PCL6, TIFF, ASCII, VIPP®Software

• LCDS/Metacode (option)

• NPS/IPS Extension (option):

- PostScript®level 2, HP PCL5e, ASCII, VIPP®, TIFF

- Emulates an IBM Printing Systems AFP Group 3 page printer with the AFIG (Advanced Function Image and Graphics) option

Print Speeds

• DocuPrint®155: Up to 155 ppm. (8.5 by 11 in./A4)

• DocuPrint®180: Up to 180 ppm. (8.5 by 11 in./A4)

Internal Dynamic Perforator

• Standard one perforator wheel

• Perforate parallel to the direction of the paper path

• Operate in static or dynamic mode

• Edge to edge micro-perf

Paper Handling

• 16 to 110 lb. (60 to 200 gsm) cut-sheet paper weights

• 7 by 10 in. (optional) to 14 by 17 in. (178 by 254 mm to 356 by 432 mm including A4, A3, B4) paper sizes

• Transparencies, label stock, tab stock, carbonless paper, pre-perforated stock, safety stock, and other specialized application materials

Input:

• Main tray (tray 1): 1,100-sheet capacity of 20 lb. (80 gsm) stock

• Auxiliary tray (tray 2): 600-sheet capacity of 20 lb. (80 gsm) stock

• Two high-capacity feeders (trays 3 and 4): 2,600 sheets each of 20 lb. (80 gsm) stock (standard)

• Up to two additional high-capacity feeders (optional): 2,600 sheets each of 20 lb. (80 gsm) stock input trays

• 7 by 10 in. (178 by 254 mm) enablement kit: enables feeding of paper as small as 7 by 10 in. (optional)

Output:

• Two high-capacity stackers (standard); up to two additional high-capacity stackers (optional). Each 2,500-sheet capacity of 20 lb. (80 gsm) stock

• Sample tray: 100 sheets of 20 lb. (80 gsm) stock

• Purge tray: 100 sheets of 20 lb. (80 gsm) stock

• Bypass transport: enables connection to any DFAcompliant, third-party inline finishing device (optional)*

Set Recovery Extension

• Supports connected or inline finishing equipment

• Printer automatically reprints damaged sets that the finisher reports as defective

Modular Trade In (MTI)

• On-site upgrades without hardware changes to the printer module

• Move from the 155 configuration to the 180 configuration with MTI

Connectivity

DocuSP®Common Controller:

LCDS:

- IBM Channel, Ethernet, TCP/IP, off-line tape

Network:

- Ethernet: TCP/IP, Netware, AppleTalk

- Token Ring: TCP/IP, Netware, AppleTalk

NPS Extension (option):

- Ethernet: TCP/IP, Netware, AppleTalk

- Token Ring: TCP/IP, Netware AppleTalk

IPS Extension (option):

- Ethernet TCP/IP, Token Ring TCP/IP

- S/370 or S/390 bus and tag

Resolution

• 600-dpi input imaged at 600 x 2400 dpi

• 300-dpi input converted to produce 600 x 2400-dpi imaging

Environmental Requirements

• Recommended operating temperature: 72° ±4°F (22° ±2°C)

• Minimum/maximum operating temperature: 50° to 85°F (10° to 29°C)

• Minimum/maximum relative humidity: 45% ± 10% (no condensation)

• Maximum normal altitude: up to 6,000 ft./1830 m above sea level

• Audible noise level: meets 82dB noise exposure limit

• Heat dissipation, in Btu per hour

- System control module: 3,074 Btu

- Printer module: 4,454 standby; 32,770 operating

Electrical Requirements

• System control: 100-240 VAC, 47-63 Hz, 12 amp

• Printer module (one of possible configurations listed below)

- Cord System: 120/208 VAC (2 Phase), 60 Hz,

50 amp dedicated service

- Star: 220/380 VAC or 230/400 VAC or 240/415

VAC (3 Phase), 50 Hz, 30 amp dedicated service

- Delta: 220 VAC or 230 VAC or 240 VAC (3 Phase),

50 Hz, 30 amp dedicated service

• Agency certification: UL, CSA, CE Mark

Physical Characteristics

Width Depth Height Weight in. (mm) in. (mm) in. (mm) lbs. (kg)

System Control Module

10.0 (254) 24.0 (610) 17.9 (455) 70 (32)

Printer Module, including Printer Control Console

77.3 (1,963) 35.9 (911) 55.0 (1,397) 1,434 (651)

High-Capacity Inverter Feeder/Stacker

41.7 (1,060) 28.3 (719) 57.7 (1,466) 663 (301)

High-Capacity Feeder/Stacker Middle Module (optional)

32.4 (822) 28.3 (719) 57.7 (1,466) 521 (237)

High-Capacity Feeder/Stacker

32.4 (822) 28.3 (719) 59.6 (1,513) 521 (237)

Bypass Transport (optional)

20.4 (518) 28.3 (719) 56.1 (1,425) 176 (80)

The DocuPrint®PowerPlus Series EPS offers two enhancements that reduce costs and increase productivity. The Internal Dynamic Perforator is the only solution to selectively perforate documents inline. The Set Recovery Extension allows you to automatically reprint documents in the event of finisher malfunction.

*Please check with your Xerox representative for availability.

**PowerPlus features available for new printer installations only. Each option sold separately.

©2004 XEROX Corporation. All rights reserved. XEROX®, DocuPrint®, DocuSP®, SquareFold®, FreeFlowTM, VIPP®and EOMSTMare trademarks of Xerox Corporation in the U.S. and/or other countries. Product appearance, configuration availability, build status and/or specifications are subject to change without notice. In support of Xerox’ environmental leadership goals, this model may contain some recycled components that are reconditioned. The Xerox Total Satisfaction Guarantee applies to equipment under a Xerox warranty or a Full Service Maintenance Agreement and is subject to certain conditions. Sun and Sun Blade are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. Adobe®and PostScript®are registered trademarks of Adobe Systems, Inc. 09/04. 610P714000B

TOTAL

SATISFACTION

GUARANTEE