Xerox 110 User Manual

Xerox iGen4 90/110 Digital Production Press, Xerox iGen4 220 Perfecting Press, and iGen4 Xerox Automated Packaging

Solution configuration North America Paper and Specialty Media Guide February, 2011

Xerox, The Document Company, the stylized X, and all Xerox names and product numbers mentioned in this publication are trademarks of Xerox Corporation. Other company trademarks are also acknowledged.

Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a particular media product
for the first time, customers are advised to purchase small quantities to insure their expectations are met. The quality of Xerox supplies is consistent from ream to ream and is backed by a 100% guarantee. The quality of non-Xerox branded paper may vary from ream to ream or carton to carton, so for optimum performance on
Xerox color equipment, use only the best - Xerox supplies. To learn more about the benefits of using Xerox Supplies, please contact your Supplies Representative or in the U.S. call 1-800-822-2200 and in Canada English 1-800-668-0199 or French Canadian 1-800-668-0133.
2003 Xerox Corporation. All rights reserved.

For your convenience, this guide contains three lists. The Xerox Guaranteed Media List, the Xerox Custom Media List and the Non-Xerox Tested Media List.

The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen4 90/110 Digital Production Press for image quality and performance. All
Xerox paper and specialty media on this list are digitally optimized, designed and manufactured for optimal performance in Xerox digital printing equipment. Our extensive testing and stringent
specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are tested and qualified by Xerox laboratories
to guarantee consistent quality.

The Xerox Custom Media List

contains custom media that has been tested on the Xerox iGen4 90/110 Digital Production Press for image quality and performance. Custom media on this list are digitally
optimized, designed and manufactured for performance in Xerox digital printing equipment. Customers should validate the Best Practices for Operation are acceptable for their application. When
purchasing a particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met.

The Non-Xerox Tested Media List contains non-Xerox branded paper and specialty media. Xerox tested many media products on the Xerox iGen4 90/110 Digital Production Press
and based on such testing have published this list of tested media products which may or may not, at the time of and based upon such testing, meet Xerox performance criteria.
No subsequent testing has been done and therefore no determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.

General Information
Media observations made in this publication are based on tests conducted using standard images with moderate to heavy image area coverage. Test machines are maintained within
specifications defined by user documentation.

This document will be updated regularly to reflect the most current media test results. Suggested machine adjustments as well as best practices for operation are included where applicable
in order to optimize media performance.

Instructions for programming media listed in this document but not yet in the Xerox iGen4 90/110 Digital Production Press stock library can be found in the customer training manual or in the
"Define New Stock" section of online help. Specific media attributes needed to program media into the stock library are included in this document.

When using the Xerox DocuSP Controller, all stocks will be automatically connected to color profiles and calibration.
To program a stock with non-default settings, see the DocuSP 3.7 Customer Documentation or the On-Line help on the DocuSP Color Server: On-Line Help/Color Management/Using
Color Profiles.
When using a Creo DFE, color mapping is done using the Paper Stock Color.

Warranty Disclaimer

iGen4 Family NA P&SMG February 2011

Basis Weight

(lb)

Grammage

Weight (gsm)

Xerographic

Bond

XeroxCXSel24B3HD

(Xerox Color Xpressions Select 24 lb. 3Hole Drilled)

3 Hole
Drilled

003R11541 24 90 Uncoated N/A Plain 0 White 103 No Regular Stack quality and stack height may be affected due to media structure or high area coverage.

XeroxCXSel24B

(Xerox Color Xpressions Select 24 lb.)

003R11540 003R11542 003R11543 24 90 Uncoated N/A Plain 0 White 96 Yes Regular

XeroxCXElite28B3HD

(Xerox Color Xpressions Elite 28 lb 3 Hole Drilled)

3 Hole
Drilled

3R11761 28 105 Uncoated N/A Plain 0 White 109 Yes Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in

the latest Customer Maintenance Manual Section 3.

Stack quality and stack height may be affected due to media structure or high area coverage

XeroxCXElite28B

(Xerox Color Xpressions Elite 28 lb.)

3R11760 3R11762 3R11763 3R11777 28 105 Uncoated N/A Plain 0 White 109 Yes Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in

the latest Customer Maintenance Manual Section 3.

XeroxCXPlanet20_28B

(Xerox ColorXpresssions Planet 20 28 lb.)

3R11800 3R11801 3R11802 28 105 Uncoated N/A Plain 0 White 103 Yes Regular

XeroxPlanet30CW28B

(Xerox Planet 30 Cream White 28 lb.)

3R11820 3R11821 3R11822 28 105 Uncoated N/A Plain 0 White 112 Yes Regular

If image permanence adjustment is required, refer to ADJ 1 - Pressure Roll Contact Arc Adjustment procedure in

the latest Customer Maintenance Manual.

This media may have a mottled appearance due to paper formation (image density and gloss).

XeroxPlanet30WW28B

(Xerox Planet 30 Warm White 28 lb.)

3R11823 3R11824 28 105 Uncoated N/A Plain 0 White 112 Yes Regular

If image permanence adjustment is required, refer to ADJ 1 - Pressure Roll Contact Arc Adjustment procedure in

the latest Customer Maintenance Manual.

This media may have a mottled appearance due to paper formation (image density and gloss).

XeroxCXPlanet100_28B

(Xerox ColorXpresssions Planet 100 28 lb.)

3R11815 28 105 Uncoated N/A Plain 0 White 112 Yes Regular Optimization of decurler settings may be needed for best stacking and runnability.

XeroxCXElite32B

(Xerox Color Xpressions Elite 32 lb.)

3R11764 3R11765 3R11766 32 120 Uncoated N/A Plain 0 White 128 Yes Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in

the latest Customer Maintenance Manual Section 3.

Cover weight

XeroxCXElite60C

(Xerox Color Xpressions Elite 60 lb. Cover)

3R11767 3R11768 3R11769 60 163 Uncoated N/A Plain 0 White 170 Yes Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in

the latest Customer Maintenance Manual Section 3.

XeroxCXPlanet20_65C

(Xerox ColorXpressions Planet 20 65 lb. Cover)

3R11803 3R11804 3R11805 65 176 Uncoated N/A Plain 0 White 176 Yes Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in

the latest Customer Maintenance Manual Section 3.

XeroxCXElite80C

(Xerox Color Xpressions + 80 lb. Cover)

3R11770 3R11771 3R11772 3R11773 80 216 Uncoated N/A Plain 0 White 224 Yes Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in

the latest Customer Maintenance Manual Section 3.

XeroxCXPlanet20_80C

(Xerox Color Xpressions Planet 20 80 lb. Cover)

3R11806 3R11807 3R11808 80 216 Uncoated N/A Plain 0 White 223 Yes Regular

XeroxPlanet30CW80C

(Xerox Planet 30 Cream White 80 lb. Cover)

3R11826 3R11827 3R11828 80 216 Uncoated N/A Plain 0 White 241 Yes Regular

If image permanence adjustment is required, refer to ADJ 1 - Pressure Roll Contact Arc Adjustment procedure in

the latest Customer Maintenance Manual.

This media may have a mottled appearance due to paper formation (image density and gloss).

Score for optimal folding performance.

XeroxPlanet30WW80C

(Xerox Planet 30 Warm White 80 lb. Cover)

3R11829 3R11830 3R11831 80 216 Uncoated N/A Plain 0 White 241 Yes Regular

If image permanence adjustment is required, refer to ADJ 1 - Pressure Roll Contact Arc Adjustment procedure in

the latest Customer Maintenance Manual.

This media may have a mottled appearance due to paper formation (image density and gloss).

Score for optimal folding performance.

XeroxCXElite100C

(Xerox Color Xpressions Elite 100 lb. Cover)

3R11774 3R11775 3R11776 100 270 Uncoated N/A Plain 0 White 273 Yes Regular

XeroxCXPlanet20_100C

(Xerox Color Xpressions Planet 20 100 lb. Cover)

3R11809 3R11810 3R11811 100 270 Uncoated N/A Plain 0 White 322 Yes Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in

the latest Customer Maintenance Manual Section 3.

The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen4 90/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally optimized, designed and

manufactured for optimal performance in Xerox di

g

ital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are tested and qualified

by Xerox laboratories to guarantee consistent quality.

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for easy

migration to future enhancements to the stock library and media

management tools.

Xerox iGen4 90/110 Digital Production Press, Xerox iGen4 220 Perfecting Press, and iGen4 Xerox Automated Packaging Solution configuration North America Guaranteed Media List February, 2011

Uncoated Cover Stocks

Finish

Uncoated Business Papers

(Bond, xerographic and laser grades)

Sequence

Thickness

(microns)

Weight of the

paper in grams

per square

meter

Sides Coated Coating Type Type

Standard cut sizes

Best Practices for Operation

8.5 x 11 8.5 x 14 17 x 11 18 x 12 Other Size

Weight of 500
sheets of the
paper specific
to grade type

Color Cleanup

Basis Weight

(lb)

Grammage

Weight (gsm)

The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen4 90/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally optimized, designed and

manufactured for optimal performance in Xerox di

g

ital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are tested and qualified

by Xerox laboratories to guarantee consistent quality.

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for easy

migration to future enhancements to the stock library and media

management tools.

Xerox iGen4 90/110 Digital Production Press, Xerox iGen4 220 Perfecting Press, and iGen4 Xerox Automated Packaging Solution configuration North America Guaranteed Media List February, 2011

FinishSequence

Thickness

(microns)

Weight of the

paper in grams

per square

meter

Sides Coated Coating Type Type

Standard cut sizes

Best Practices for Operation

8.5 x 11 8.5 x 14 17 x 11 18 x 12 Other Size

Weight of 500
sheets of the
paper specific
to grade type

Color Cleanup

Point

XeroxDCSupreme G 8pt

(Xerox Digital Color Supreme Gloss 8pt)

003R11790 003R11791 003R11792 8 184

C1S (Coated

One Side)

High-Gloss Plain 0 White 194 Yes Smooth

XeroxDCtd1Side8pt

(Xerox Digital Coated 1 Side 8pt)

3R11700 3R11701 3R11702 8 184

C1S (Coated

One Side)

Satin Plain 0 White 194 Yes Regular

XeroxDCSupreme G 10pt

(Xerox Digital Color Supreme Gloss 10pt)

003R11793 003R11794 003R11795 003R11796 10 219

C1S (Coated

One Side)

High-Gloss Plain 0 White 264 Yes Smooth

XeroxDCtd1Side10pt

(Xerox Digital Coated 1 Side 10pt)

3R11703 3R11704 10 210

C1S (Coated

One Side)

Satin Plain 0 White 264 Yes Regular

XeroxDCSupreme G 12pt

(Xerox Digital Color Supreme Gloss 12pt)

003R11797 003R11798 003R11799 12 247

C1S (Coated

One Side)

High-Gloss Plain 0 White 313 Yes Smooth

XeroxDCtd1Side12pt

(Xerox Digital Coated 1 Side 12pt)

3R11707 3R11708 12 228

C1S (Coated

One Side)

Satin Plain 0 White 313 Yes Regular

Text Weight

XeroxDCSelectG 60T

(Digital Color Select Gloss 60lb Text)

003R11501 60 90

C2S (Coated

Two Sides)

Gloss Plain 0 White 96 Yes Smooth High area coverage with multilayer colors may be stressful on the fusing system.

XeroxDCEliteG 80T

(Digital Color Elite Gloss 80lb Text)

003R11450 003R11451 003R11452 003R11453 80 120

C2S (Coated

Two Sides)

Gloss Plain 0 White 96 Yes Smooth

XeroxDCEliteS 80T

(Digital Color Elite Silk 80lb Text)

003R11470 003R11471 003R11472 003R11473 80 120

C2S (Coated

Two Sides)

Semi-gloss Plain 0 White 115 Yes Smooth

XeroxDCSelectG 80T

(Digital Color Select Gloss 80lb Text)

003R11503 003R11504 003R11505 80 120

C2S (Coated

Two Sides)

Gloss Plain 0 White 96 Yes Smooth

XeroxDCEliteG 100T

(Digital Color Elite Gloss 100lb Text)

003R11454 003R11455 003R11456 003R11457 100 144

C2S (Coated

Two Sides)

Gloss Plain 0 White 123 Yes Smooth

XeroxDCEliteS 100T

(Digital Color Elite Silk 100lb Text)

003R11474 003R11475 003R11476 003R11477 100 144

C2S (Coated

Two Sides)

Semi-gloss Plain 0 White 121 Yes Smooth

XeroxDCSelectG 100T

(Digital Color Select Gloss 100lb Text)

003R11510 003R11511 003R11512 100 144

C2S (Coated

Two Sides)

Gloss Plain 0 White 123 Yes Smooth

Cover Weight

XeroxDCEliteG 80C

(Digital Color Elite Gloss 80lb Cover)

003R11458 003R11459 003R11460 003R11461 80 213

Coated Two

Sides

Gloss Plain 0 White 183 Yes Smooth

XeroxDCEliteS 80C

(Digital Color Elite Silk 80lb Cover)

003R11478 003R11479 003R11480 003R11481 80 213

Coated Two

Sides

Semi-gloss Plain 0 White 181 Yes Smooth

XeroxDCSelectG 80C

(Digital Color Select Gloss 80lb Cover)

003R11506 003R11507 003R11508 80 213

Coated Two

Sides

Gloss Plain 0 White 183 Yes Smooth

XeroxDCEliteG 100C

(Digital Color Elite Gloss 100lb Cover)

003R11462 003R11463 003R11464 003R11465 100 275

Coated Two

Sides

Gloss Plain 0 White 249 Yes Smooth

Coated One Side Text or Book Stock C1S

Coated Two Side Text or Book Stock C2S

Coated Two Side Cover Stock C2S

Basis Weight

(lb)

Grammage

Weight (gsm)

The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen4 90/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally optimized, designed and

manufactured for optimal performance in Xerox di

g

ital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are tested and qualified

by Xerox laboratories to guarantee consistent quality.

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for easy

migration to future enhancements to the stock library and media

management tools.

Xerox iGen4 90/110 Digital Production Press, Xerox iGen4 220 Perfecting Press, and iGen4 Xerox Automated Packaging Solution configuration North America Guaranteed Media List February, 2011

FinishSequence

Thickness

(microns)

Weight of the

paper in grams

per square

meter

Sides Coated Coating Type Type

Standard cut sizes

Best Practices for Operation

8.5 x 11 8.5 x 14 17 x 11 18 x 12 Other Size

Weight of 500
sheets of the
paper specific
to grade type

Color Cleanup

XeroxDCEliteS 100C

(Digital Color Elite Silk 100lb Cover)

003R11482 003R11483 003R11484 003R11485 100 275

Coated Two

Sides

Semi-gloss Plain 0 White 272 Yes Smooth

XeroxDCSelectG 100C

(Digital Color Select Gloss 100lb Cover)

003R11513 003R11514 003R11515 100 275

Coated Two

Sides

Gloss Plain 0 White 249 Yes Smooth

XeroxDCEliteG 110C

(Digital Color Elite Gloss 110lb Cover)

003R11466 003R11467 003R11468 003R11469 110 298

Coated Two

Sides

Gloss Plain 0 White 249 Yes Smooth

XeroxDCEliteS 110C

(Digital Color Elite Silk 110lb Cover)

003R11486 003R11487 003R11488 003R11489 110 298

Coated Two

Sides

Semi-gloss Plain 0 White 272 Yes Smooth

XeroxPlasTab 5B Blue

(Xerox Multipurpose Plastic Tabs 5 Bank Blue)

003R5693 163 Uncoated N/A Precut Tab 5 White 205 No Regular

Please check with your service representative before running.

Specific feeder hardware, Tag 016F TAB Media Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine

configuration) is necessary to run tabs or dividers.

XeroxPlasTab 5B Blue3HD

(Xerox Multipurpose Plastic Tabs 5 Bank Blue 3 Hole Drilled)

3 Hole
Drilled

003R5694 163 Uncoated N/A Precut Tab 5 White 205 No Regular

Please check with your service representative before running.

Stack quality and stack height may be affected due to media structure or high area coverage.

Specific feeder hardware, Tag 016F TAB Media Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine

configuration) is necessary to run tabs or dividers.

XeroxPlasTab 5B Clear

(Xerox Multipurpose Plastic Tabs 5 Bank Clear)

003R5520 163 Uncoated N/A Precut Tab 5 White 205 No Regular

Please check with your service representative before running.

Specific feeder hardware, Tag 016F TAB Media Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine

configuration) is necessary to run tabs or dividers.

XeroxPlasTab 5B Clear3HD

(Xerox Multipurpose Plastic Tabs 5 Bank Clear 3 Hole Drilled)

3 Hole
Drilled

003R5521 163 Uncoated N/A Precut Tab 5 White 205 No Regular

Please check with your service representative before running.

Stack quality and stack height may be affected due to media structure or high area coverage.

Specific feeder hardware, Tag 016F TAB Media Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine

configuration) is necessary to run tabs or dividers.

XeroxPlasTab 5BRainbow

(Xerox Multiurpose Plastic Tabs 5 Bank Rainbow)

003R5650 163 Uncoated N/A Precut Tab 5 White 205 No Regular

Please check with your service representative before running.

Specific feeder hardware, Tag 016F TAB Media Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine

configuration) is necessary to run tabs or dividers.

XeroxPlasTab 5BRBow 3HD

(Xerox Multipurpose Plastic Tabs 5 Bank Rainbow 3 Hole

Drilled)

3 Hole
Drilled

003R5640 163 Uncoated N/A Precut Tab 5 White 205 No Regular

Please check with your service representative before running.

Stack quality and stack height may be affected due to media structure or high area coverage.

Specific feeder hardware, Tag 016F TAB Media Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine

configuration) is necessary to run tabs or dividers.

XeroxPlasTab 5B Red

(Xerox Multipurpose Plastic Tabs 5 Bank Red)

003R5689 163 Uncoated N/A Precut Tab 5 White 205 No Regular

Please check with your service representative before running.

Specific feeder hardware, Tag 016F TAB Media Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine

configuration) is necessary to run tabs or dividers.

XeroxPlasTab 5B Red 3HD

(Xerox Multipurpose Plastic Tabs 5 Bank Red 3 Hole Drilled)

3 Hole
Drilled

003R5690 163 Uncoated N/A Precut Tab 5 White 205 No Regular

Please check with your service representative before running.

Stack quality and stack height may be affected due to media structure or high area coverage.

Specific feeder hardware, Tag 016F TAB Media Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine

configuration) is necessary to run tabs or dividers.

XeroxTabR 3B White

(Xerox Tabs Single Reverse Collated 3 Bank White)

003R5422 163 Uncoated N/A Precut Tab 3 White 205 No Regular

Please check with your service representative before running.

Specific feeder hardware, Tag 016F TAB Media Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine

configuration) is necessary to run tabs or dividers.

XeroxTabR 3B White3HD

(Xerox Tabs Single Reverse Collated 3 Bank White 3 Hole

Drilled)

3 Hole
Drilled

003R5423 163 Uncoated N/A Precut Tab 3 White 205 No Regular

Stack quality and stack height may be affected due to media structure or high area coverage.
Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media
Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.

XeroxTabR 4B White

(Xerox Tabs Single Reverse Collated 4 Bank White)

003R5426 163 Uncoated N/A Precut Tab 4 White 205 No Regular

Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media
Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.

XeroxTabR 4B White3HD

(Xerox Tabs Single Reverse Collated 4 Bank White 3 Hole

Drilled)

3 Hole
Drilled

003R5427 163 Uncoated N/A Precut Tab 4 White 205 No Regular

Stack quality and stack height may be affected due to media structure or high area coverage.
Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media
Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.

XeroxTabR 5B White

(Xerox Tabs Single Reverse Collated 5 Bank White)

003R4415 163 Uncoated N/A Precut Tab 5 White 205 No Regular

Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media
Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.

XeroxTabR 8B White

(Xerox Tabs Single Reverse Collated 8 Bank White)

003R5713 163 Uncoated N/A Precut Tab 8 White 205 No Regular

Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media
Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.

XeroxTabR 8B White3HD

(Xerox Tabs Single Reverse Collated 8 Bank White 3 Hole

Drilled)

3 Hole
Drilled

003R5714 163 Uncoated N/A Precut Tab 8 White 205 No Regular

Stack quality and stack height may be affected due to media structure or high area coverage.
Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media
Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.

XeroxTab 5B Blue

(Xerox Tabs 5 Bank Blue)

003R5312 163 Uncoated N/A Precut Tab 5 White 205 No Regular

Please check with your service representative before running.

Specific feeder hardware, Tag 016F TAB Media Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine

configuration) is necessary to run tabs or dividers.

Tabs

Basis Weight

(lb)

Grammage

Weight (gsm)

The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen4 90/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally optimized, designed and

manufactured for optimal performance in Xerox di

g

ital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are tested and qualified

by Xerox laboratories to guarantee consistent quality.

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for easy

migration to future enhancements to the stock library and media

management tools.

Xerox iGen4 90/110 Digital Production Press, Xerox iGen4 220 Perfecting Press, and iGen4 Xerox Automated Packaging Solution configuration North America Guaranteed Media List February, 2011

FinishSequence

Thickness

(microns)

Weight of the

paper in grams

per square

meter

Sides Coated Coating Type Type

Standard cut sizes

Best Practices for Operation

8.5 x 11 8.5 x 14 17 x 11 18 x 12 Other Size

Weight of 500
sheets of the
paper specific
to grade type

Color Cleanup

XeroxTab 5B Blue3HD

(Xerox Tabs 5 Bank Blue 3 Hole Drilled)

3 Hole
Drilled

003R5313 163 Uncoated N/A Precut Tab 5 White 205 No Regular

Please check with your service representative before running.

Stack quality and stack height may be affected due to media structure or high area coverage.

Specific feeder hardware, Tag 016F TAB Media Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine

configuration) is necessary to run tabs or dividers.

XeroxTabS 5B White

(Xerox Tabs Single Straight Collated 5 Bank White)

003R4417 163 Uncoated N/A Precut Tab 5 White 205 No Regular

Please check with your service representative before running.

Specific feeder hardware, Tag 016F TAB Media Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine

configuration) is necessary to run tabs or dividers.

XeroxTabR 5B White3HD

(Xerox Tabs Single Reverse Collated White 3 Hole Drilled)

3 Hole
Drilled

003R4416 163 Uncoated N/A Precut Tab 5 White 205 No Regular

Stack quality and stack height may be affected due to media structure or high area coverage.
Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media
Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.

XeroxTabS 5B White3HD

(Xerox Tabs Single Straight Collated 5 Bank White 3 Hole

Drilled)

3 Hole
Drilled

003R4418 163 Uncoated N/A Precut Tab 5 White 205 No Regular

Please check with your service representative before running.

Stack quality and stack height may be affected due to media structure or high area coverage.

Specific feeder hardware, Tag 016F TAB Media Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine

configuration) is necessary to run tabs or dividers.

XeroxXpress+Tab 5B 3HD

(Xerox Xpressions+ Tabs 5 Bank 3 Hole Drilled)

3 Hole
Drilled

003R12369 160 Uncoated N/A Precut Tab 5 White 170 No Regular

Stack quality and stack height may be affected due to media structure or high area coverage.

Please check with your service representative before running.

Specific feeder hardware, Tag 016F TAB Media Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine

configuration) is necessary to run tabs or dividers.

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in

the latest Customer Maintenance Manual Section 3.

XeroxXpress+Tab 5B

(Xerox Xpressions+ Tabs 5 Bank)

003R12368 160 Uncoated N/A Precut Tab 5 White 170 No Regular

Stack quality and stack height may be affected due to media structure or high area coverage.

Please check with your service representative before running.

Specific feeder hardware, Tag 016F TAB Media Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine

configuration) is necessary to run tabs or dividers.

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in

the latest Customer Maintenance Manual Section 3.

Weight (lb.)

XeroxTransferPaper

(Xerox One Step Transfer Paper)

003R5811 003R5812 118

C1S (Coated

One Side)

Gloss Transparency 0 Clear 143 No Smooth

Simplex only recommended.

Static buildup may affect media runnability and/or stacking.

XeroxCX TriBrochure

(Xerox Color Xpressions Trifold Brochure 32 lb.)

003R12310 32 120 Uncoated N/A Plain 0 White 120 No Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in

the latest Customer Maintenance Manual Section 3.

For uniform image quality, do not image within 5 mm of score.

XeroxPolyPaper 4mil

(Xerox Polyester Paper 4 mil)

003R12414 125

C2S (Coated

Two Sides)

Gloss Plain 0 White 95 No Smooth Static build up may affect media runnability and/or stacking.

XeroxAllinOneMailer

(Xerox All In One Mailer)

003R12446 003R12447 150 Uncoated N/A Plain 0 White 160 No Semi-Rough

This media may have a mottled appearance due to paper formation (image density and gloss).

For uniform image quality, do not image within 3 mm of label edges.

For best image quality do not image within 3 mm of perforations.

ATA mode may improve image quality.

Imaging over die cuts or label edges my adversely affect fuser roll life.

XeroxBRE 1up

(Xerox Business Reply Envelopes 1 up)

003R12445 150 Uncoated N/A Plain 0 White 160 No Semi-Rough

This media may have a mottled appearance due to poor paper formation (image density and gloss).

Stack quality and stack height may be affected due to media structure or high area coverage.

Load and stack 200-300 envelopes maximum due to media structure.

XeroxDocuPac

(Xerox DocuPac Folders)

003R4885 160 Uncoated N/A Plain 0 White 215 No Regular For uniform image quality, do not image within 10 mm of raised score or 2 mm of dimpled score

XeroxPolyPaper 5mil

(Xerox Polyester Paper 5 mil)

003R12363 003R12365 160

Coated Two

Sides

Gloss Plain 0 White 120 No Smooth Static build up may affect media runnability and/or stacking.

XeroxPolyPaper 5mil3HD

(Xerox Polyester Paper 5 mil 3 Hole Drilled)

3 Hole
Drilled

003R12364 160

Coated Two

Sides

Gloss Plain 0 White 120 No Smooth

Static build up may affect media runnability and/or stacking.

Stack quality and stack height may be affected due to media structure or high area coverage.

XeroxPremDigBusCard

(Xerox Premium Digital Business Cards 10 Up)

003R12321 163 Uncoated N/A Plain 0 White 216 No Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in

the latest Customer Maintenance Manual Section 3.

For uniform image quality, do not image within 3 mm of card edges (side 1) or within 7 mm of tape edges (side

2).

Stack quality and stack height may be affected due to media structure or high area coverage.

XeroxLaserDocuPac

(Xerox DocuPak Laser Folders)

003R05105 176 Uncoated N/A Plain 0 White 178 No Regular For uniform image quality, do not image within 10 mm of raised score or 2 mm of dimpled score

Specialties

Basis Weight

(lb)

Grammage

Weight (gsm)

The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen4 90/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally optimized, designed and

manufactured for optimal performance in Xerox di

g

ital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are tested and qualified

by Xerox laboratories to guarantee consistent quality.

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for easy

migration to future enhancements to the stock library and media

management tools.

Xerox iGen4 90/110 Digital Production Press, Xerox iGen4 220 Perfecting Press, and iGen4 Xerox Automated Packaging Solution configuration North America Guaranteed Media List February, 2011

FinishSequence

Thickness

(microns)

Weight of the

paper in grams

per square

meter

Sides Coated Coating Type Type

Standard cut sizes

Best Practices for Operation

8.5 x 11 8.5 x 14 17 x 11 18 x 12 Other Size

Weight of 500
sheets of the
paper specific
to grade type

Color Cleanup

XeroxNeverTear

(Xerox Never Tear)

003R3118 180

C2S (Coated

Two Sides)

Gloss Plain 0 White 119 No Smooth Static buildup may affect media runnability and/or stacking.

XeroxNeverTear 3HD

(Xerox Never Tear 3 Hole Drilled)

3 Hole
Drilled

003R3109 180

C2S (Coated

Two Sides)

Gloss Plain 0 White 119 No Smooth

Static buildup may affect media runnability and/or stacking.

Stack quality and stack height may be affected due to media structure or high area coverage.

XeroxProColorPBTran

(Xerox Production Color Paper Backed Transparency)

003R5764 180

C1S (Coated

One Side)

Gloss Transparency 0 Clear 187 No Smooth

Simplex only recommended.
Stack quality and stack height may be affected due to media structure or high area coverage.
This media may have a mottled appearance due to paper formation (image density and gloss).

Static buildup may affect media runnability and/or stacking.

Deliver to stacker FACE DOWN to avoid stacking issues.

XeroxDocuCard 1up

(Xerox DocuCards 1up)

003R12348 80 200 Uncoated N/A Plain 0 White 170 No Semi-Rough

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in

the latest Customer Maintenance Manual Section 3.

Stack quality and stack height may be affected due to media structure or high area coverage.

For uniform image quality do not image within 5 mm of card edge.

TAB may need to be cleaned prir to running media.

For feeding without a DocuCard Enabler Kit feed tray load max is 50-100 sheets. Load card inboard for Long

Edge Feed and trail edge for Short Edge Feed.

A DocuCard Enabler Kit is available to facilitate feeding and stacking of greater volumes.

XeroxWindowDecalsCl

(Xerox Window Decals Clear)

003R06339 200

C1S (Coated

One Side)

Gloss Transparency 0 Clear 114 No Smooth

Simplex only recommended.

Static buildup may affect media runnability and/or stacking.

Contact Service and implement Tip # 274433 if frequent misfeeds occur.

XeroxWindowDecalsOp

(Xerox Window Decals Opaque)

003R12059 003R12315 200

C1S (Coated

One Side)

Gloss Transparency 0 Clear 114 No Smooth

For uniform image quality, do not image within 3 mm of die cut on back of decal.

Simplex only recommended.

Static buildup may affect media runnability and/or stacking.

XeroxDuraPaper 10pt

(Xerox DuraPaper 10 pt.)

003R12064 003R12063 200 Uncoated N/A Plain 0 White 264 No Regular

If image permanence adjustment is required, refer to ADJ 1-Pressure Roll Contact Arc Adjustment procedure in

the latest Customer Maintenance Manual.

Auto Duplex side to side registration may not be within 1.5mm due to composition of the media.

TAB Blade may need to be cleaned during run.

XeroxDuraPaper 3HD

(Xerox DuraPaper-3 Hole Drilled)

3 Hole
Drilled

003R12065 200 Uncoated N/A Plain 0 White 264 No Regular

If image permanence adjustment is required, refer to ADJ 1-Pressure Roll Contact Arc Adjustment procedure in

the latest Customer Maintenance Manual.

Stack quality and stack height may be affected due to media structure or high area coverage.

Auto Duplex side to side registration may not be within 1.5mm due to composition of the media.

TAB Blade may need to be cleaned during run.

XeroxCXDocumentFolder

(Xerox Color Xpressions Document Folder)

003R12406 80 216 Uncoated N/A Plain 0 White 224 Yes Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in

the latest Customer Maintenance Manual Section 3.

For uniform image quality, do not image within 5 mm of score.

XeroxGlossGreetCard

(Xerox Glossy Greeting Cards 10pt)

003R6340 219

C1S (Coated

One Side)

High Gloss Plain 0 White 264 Yes Smooth

XeroxSGDocumentFolder

(Xerox Supreme Gloss Document Folder)

003R12407 219

C1S (Coated

One Side)

High-Gloss Plain 0 White 264 Yes Smooth

For uniform image quality do not imge within 5 mm of the score.

Image degradation may be present on uncoated side (side 2).

XeroxDocuMag C

(Xerox DocuMagnet Coated)

003R12419 280

C1S (Coated

One Side)

Gloss Plain 0 White 194 No Smooth

Simplex only recommended

For uniform image quality do not image within 5 mm of card edge.

A DocuCard Enabler Kit is available to facilitate feeding and stacking of greater volumes.

XeroxDocuMag U

(Xerox DocuMagnet Uncoated)

003R12418 280

C1S (Coated

One Side)

Matte Plain 0 White 170 No Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in

the latest Customer Maintenance Manual Section 3.

Simplex only recommended

For uniform image quality do not image within 5 mm of card edge.

A DocuCard Enabler Kit is available to facilitate feeding and stacking of greater volumes.

XeroxLabelDCX M 10up

(Xerox Digital Color Xpressions Matte Coated Labels 10-UP)

003R6332 190

C1S (Coated

One Side)

Matte Plain 0 White 187 No Smooth

For uniform image quality, do not image within 3 mm of label edges.

Imaging over die cuts or label edges may adversely affect fuser roll life.

Simplex only recommended.

XeroxLabelDCX M 1up

(Xerox Digital Color Xpressions Matte Coated Labels 1-UP)

003R5772

003R12371

190

C1S (Coated

One Side)

Matte Plain 0 White 187 No Smooth

For uniform image quality, do not image within 3 mm of label edges.

Imaging over die cuts or label edges may adversely affect fuser roll life.

Simplex only recommended.

XeroxLabelDCX M 30up

(Xerox Digital Color Xpressions Matte Coated Labels 30-UP)

003R6333 190

C1S (Coated

One Side)

Matte Plain 0 White 187 No Smooth

For uniform image quality, do not image within 3 mm of label edges.

Imaging over die cuts or label edges may adversely affect fuser roll life.

Simplex only recommended.

XeroxLabelDCX M 4up

(Xerox Digital Color Xpressions Matte Coated Labels 4-UP)

003R5773 190

C1S (Coated

One Side)

Matte Plain 0 White 187 No Smooth

For uniform image quality, do not image within 3 mm of label edges.

Imaging over die cuts or label edges may adversely affect fuser roll life.

Simplex only recommended.

Label Stock

Basis Weight

(lb)

Grammage

Weight (gsm)

The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen4 90/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally optimized, designed and

manufactured for optimal performance in Xerox di

g

ital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are tested and qualified

by Xerox laboratories to guarantee consistent quality.

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for easy

migration to future enhancements to the stock library and media

management tools.

Xerox iGen4 90/110 Digital Production Press, Xerox iGen4 220 Perfecting Press, and iGen4 Xerox Automated Packaging Solution configuration North America Guaranteed Media List February, 2011

FinishSequence

Thickness

(microns)

Weight of the

paper in grams

per square

meter

Sides Coated Coating Type Type

Standard cut sizes

Best Practices for Operation

8.5 x 11 8.5 x 14 17 x 11 18 x 12 Other Size

Weight of 500
sheets of the
paper specific
to grade type

Color Cleanup

XeroxLabelDCX M CD

(Xerox Digital Color Xpressions Matte Coated Labels CD ROM)

003R6330 003R12373 190

C1S (Coated

One Side)

Matte Plain 0 White 187 No Smooth

For uniform image quality, do not image within 3 mm of label edges.

Imaging over die cuts or label edges may adversely affect fuser roll life.

Simplex only recommended.

Index Weight

XeroxIndex Blu 90

(Xerox 90 lb. Index Blue)

003R05294 90 163 Uncoated N/A Plain 0 White 205 Yes Regular

XeroxIndex Grn 90

(Xerox 90 lb. Index Green)

003R05296 90 163 Uncoated N/A Plain 0 White 205 Yes Regular

XeroxIndex Gry 90

(Xerox 90 lb. Index Gray)

003R05297 90 163 Uncoated N/A Plain 0 White 205 Yes Regular

XeroxIndex Ivo 90

(Xerox 90 lb. Index Ivory)

003R05298 90 163 Uncoated N/A Plain 0 White 205 Yes Regular

XeroxIndex W 90

(Xerox 90 lb. Index White)

003R03004 003R05102 90 163 Uncoated N/A Plain 0 White 205 Yes Regular

XeroxIndex Yel 90

(Xerox 90 lb. Index Yellow)

003R05295 90 163 Uncoated N/A Plain 0 White 205 Yes Regular

Index Weight

XeroxCarb2SWC

(Xerox Carbonless, 2 part, Straight PreCollated, White and

Canary)

003R12420 003R12422 003R12423 80 Uncoated N/A Ordered 2 White 110 No Rough

This media may have a mottled appearance due to paper formation (image density and gloss).

Optimization of decurler settings may be needed for best stacking and runnability.

Fuser Fluid II is recommended for duplex applications.

Reverse PreCollated product run face up to stacker is recommended.

XeroxCarb2SWP

(Xerox Carbonless, 2 part, Straight PreCollated, White

and Pink)

003R12421 80 Uncoated N/A Ordered 2 White 110 No Rough

This media may have a mottled appearance due to paper formation (image density and gloss).

Optimization of decurler settings may be needed for best stacking and runnability.

Fuser Fluid II is recommended for duplex applications.

Reverse PreCollated product run face up to stacker is recommended.

XeroxCarb3RPCW

(Xerox Carbonless, 3 part, Reverse PreCollated, Pink, Canary

and White)

003R12424 80 Uncoated N/A Ordered 3 White 110 No Rough

This media may have a mottled appearance due to paper formation (image density and gloss).

Optimization of decurler settings may be needed for best stacking and runnability.

Fuser Fluid II is recommended for duplex applications.

Reverse PreCollated product run face up to stacker is recommended.

XeroxCarb3SWCP

(Xerox Carbonless, 3 part, Straight PreCollated, White. Canary

and Pink)

003R12425 003R12427 003R12428

003R12432

(9x11 with
vertical perf)
003R12433
(8.5x11 with
vertical perf)

80 Uncoated N/A Ordered 3 White 110 No Rough

This media may have a mottled appearance due to paper formation (image density and gloss).

Optimization of decurler settings may be needed for best stacking and runnability.

Fuser Fluid II is recommended for duplex applications.

Reverse PreCollated product run face up to stacker is recommended.

XeroxCarb4RGPCW

(Xerox Carbonless, 4 part, Reverse PreCollated, Green, Pink,

Canary and White)

003R12429 80 Uncoated N/A Ordered 4 White 110 No Rough

This media may have a mottled appearance due to paper formation (image density and gloss).

Optimization of decurler settings may be needed for best stacking and runnability.

Fuser Fluid II is recommended for duplex applications.

Reverse PreCollated product run face up to stacker is recommended.

XeroxCarb4SWCPG

(Xerox Carbonless, 4 part, Straight PreCollated, White, Canary,

Pink and Green)

003R12430 003R12431 80 Uncoated N/A Ordered 4 White 110 No Rough

This media may have a mottled appearance due to paper formation (image density and gloss).

Optimization of decurler settings may be needed for best stacking and runnability.

Fuser Fluid II is recommended for duplex applications.

Reverse PreCollated product run face up to stacker is recommended.

XeroxCarbCBSingleW

(Xerox Carbonless, Coated Back, Singles, White)

003R12434 80 Uncoated N/A Plain 0 White 110 No Rough

This media may have a mottled appearance due to paper formation (image density and gloss).

Optimization of decurler settings may be needed for best stacking and runnability.

Fuser Fluid II is recommended for duplex applications.

Uncoated Index Stocks

Carbonless

Basis Weight

(lb)

Grammage

Weight (gsm)

The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen4 90/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally optimized, designed and

manufactured for optimal performance in Xerox di

g

ital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are tested and qualified

by Xerox laboratories to guarantee consistent quality.

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for easy

migration to future enhancements to the stock library and media

management tools.

Xerox iGen4 90/110 Digital Production Press, Xerox iGen4 220 Perfecting Press, and iGen4 Xerox Automated Packaging Solution configuration North America Guaranteed Media List February, 2011

FinishSequence

Thickness

(microns)

Weight of the

paper in grams

per square

meter

Sides Coated Coating Type Type

Standard cut sizes

Best Practices for Operation

8.5 x 11 8.5 x 14 17 x 11 18 x 12 Other Size

Weight of 500
sheets of the
paper specific
to grade type

Color Cleanup

XeroxCarbCFBSingleW

(Xerox Carbonless, Coated Front and Back, Singles, White)

003R12435 80 Uncoated N/A Plain 0 White 110 No Rough

This media may have a mottled appearance due to paper formation (image density and gloss).

Optimization of decurler settings may be needed for best stacking and runnability.

Fuser Fluid II is recommended for duplex applications.

XeroxCarbCFBSingleC

(Xerox Carbonless, Coated Front and Back, Singles, Canary)

003R12437 80 Uncoated N/A Plain 0 Yellow 112 No Rough

This media may have a mottled appearance due to paper formation (image density and gloss).

Optimization of decurler settings may be needed for best stacking and runnability.

Fuser Fluid II is recommended for duplex applications.

XeroxCarbCFSingleC

(Xerox Carbonless, Coated Front, Singles, Canary)

003R12438 80 Uncoated N/A Plain 0 Yellow 112 No Rough

This media may have a mottled appearance due to paper formation (image density and gloss).

Optimization of decurler settings may be needed for best stacking and runnability.

Fuser Fluid II is recommended for duplex applications.

XeroxCarbCFSingleP

(Xerox Carbonless, Coated Front, Singles, Pink)

003R12439 80 Uncoated N/A Plain 0 Pink 107 No Rough

This media may have a mottled appearance due to paper formation (image density and gloss).

Optimization of decurler settings may be needed for best stacking and runnability.

Fuser Fluid II is recommended for duplex applications.

XeroxCarbCFSingleW

(Xerox Carbonless, Coated Front, Singles, White)

003R12440 80 Uncoated N/A Plain 0 White 110 No Rough

This media may have a mottled appearance due to paper formation (image density and gloss).

Optimization of decurler settings may be needed for best stacking and runnability.

Fuser Fluid II is recommended for duplex applications.

Basis Weight

(lb)

Grammage

Weight (gsm)

XeroxUncTextureLin24

(Xerox Uncoated Textured Linen 24 lb Bond)

X 24 90 Uncoated N/A Plain 0 White 96 Yes Rough

Simplex only recommended

ATA mode may help image quality.

XeroxUncTextureLin70

(Xerox Uncoated Texture Linen 70 lb Text)

X 28 105 Uncoated N/A Plain 0 White 109 Yes Rough ATA mode may help image quality.

XeroxUncTextureLin80

(Xerox Uncoated Texture Linen 80 lb Cover)

X 80 216 Uncoated N/A Plain 0 White 224 Yes Rough ATA mode may help image quality.

XeroxSupremeTextureCan

(Xerox Supreme Gloss Coated Texture Canvas 10 pt)

X X 219

C1S (Coated

One Side)

High-gloss Plain 0 White 264 Yes Smooth ATA mode may help image quality.

XeroxSupremeTextureLin

(Xerox Supreme Gloss Coated Texture Linen 10 pt)

X X 219

C1S (Coated

One Side)

High-gloss Plain 0 White 264 Yes Smooth ATA mode may help image quality.

XeroxSupremeTextureSilk

(Xerox Supreme Gloss Coated Texture Silk 10 pt)

X X 219

C1S (Coated

One Side)

High-gloss Plain 0 White 264 Yes Smooth ATA mode may help image quality.

XeroxClientCardL 2Up

(Xerox Client Card Lightweight 2 Up)

X 80 118

C2S (Coated

Two Sides)

Gloss Plain 0 White 170 No Smooth

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in

the latest Customer Maintenance Manual Section 3.

Stack quality and stack height may be affected due to media structure or high area coverage.

For uniform image quality do not image within 5 mm of card edge.
Load and stack 50-100 sheets maximum due to media structure.

TAB may need to be cleaned prior to running media.

A DocuCard Enabler Kit is available to facilitate feeding and stacking of greater volumes.

XeroxClientCardH 2Up

(Xerox Client Card Heavyweight 2 Up)

X 60 163

C2S (Coated

Two Sides)

Gloss Plain 0 White 170 No Smooth

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in

the latest Customer Maintenance Manual Section 3.

Stack quality and stack height may be affected due to media structure or high area coverage.

For uniform image quality do not image within 5 mm of card edge.
Load and stack 50-100 sheets maximum due to media structure.

TAB may need to be cleaned prior to running media.

A DocuCard Enabler Kit is available to facilitate feeding and stacking of greater volumes.

XeroxDocuGlossC 1up

(Xerox DocuGloss Card 1up)

X X 60 163 Uncoated N/A Plain 0 White 170 No Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in

the latest Customer Maintenance Manual Section 3.

Stack quality and stack height may be affected due to media structure or high area coverage.

For uniform image quality do not image within 5 mm of card edge.

TAB may need to be cleaned prir to running media.

Load and stack 50-100 sheets maximum due to media structure.

A DocuCard Enabler Kit is available to facilitate feeding and stacking of greater volumes.

XeroxDocuGlossC 2up

(Xerox DocuGloss Card 2up)

X X 60 163 Uncoated N/A Plain 0 White 170 No Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in

the latest Customer Maintenance Manual Section 3.

Stack quality and stack height may be affected due to media structure or high area coverage.

For uniform image quality do not image within 5 mm of card edge.

TAB may need to be cleaned prir to running media.

Load and stack 50-100 sheets maximum due to media structure.

A DocuCard Enabler Kit is available to facilitate feeding and stacking of greater volumes.

XeroxValuPeel C 1up

(Xerox Value Peel Card Coated 1 up)

X X 80 216

C1S (Coated

One Side)

Gloss Plain 0 White 170 No Smooth

For uniform image quality do not image within 5 mm of card edge.
Load and stack 50-100 sheets maximum due to media structure.

It is recommended to not image on back if laminated.

TAB may need to be cleaned prior to running media.

XeroxValuPeel C 2up

(Xerox ValuPeel Card Coated 2 up)

X X 80 216

C1S (Coated

One Side)

Gloss Plain 0 White 170 No Smooth

For uniform image quality do not image within 5 mm of card edge.
Load and stack 50-100 sheets maximum due to media structure.

It is recommended to not image on back if laminated.

TAB may need to be cleaned prior to running media.

XeroxValuPerf C 1up

(Xerox ValuPerfCard Coated 1up)

X X 80 216

C1S (Coated

One Side)

Gloss Plain 0 White 170 No Smooth

For uniform image quality do not image within 5 mm of card edge.
Load and stack 50-100 sheets maximum due to media structure.

It is recommended to not image on back if laminated.

TAB may need to be cleaned prior to running media.

XeroxValuPerf C 2up

(Xerox ValuPerfCard Coated 2 up)

X X 80 216

C1S (Coated

One Side)

Gloss Plain 0 White 170 No Smooth

For uniform image quality do not image within 5 mm of card edge.
Load and stack 50-100 sheets maximum due to media structure.

It is recommended to not image on back if laminated.

TAB may need to be cleaned prior to running media.

XeroxValuPeel U 1up

(Xerox ValuPeelCard Uncoated 1 up)

X X 80 216 Uncoated N/A Plain 0 White 194 No Regular

For uniform image quality do not image within 5 mm of card edge.
Load and stack 50-100 sheets maximum due to media structure.

It is recommended to not image on back if laminated.

TAB may need to be cleaned prior to running media.

Xerox iGen4 90/110 Digital Production Press, Xerox iGen4 220 Perfecting Press, and iGen4 Xerox Automated Packaging Solution configuration North America Custom Media List February, 2011

The Xerox CUSTOM Media List contains custom media that has been tested on the Xerox iGen4 90/110 Digital Production Press for image quality and performance.

Custom media on this list are digitally optimized, designed and manufactured for performance in Xerox digital printing equipment.

Best Practices for Operation are outlined below.

Customers should validate the Best Practices for Operation are acceptable for their application.

*Any alterations to the product's basic design, including sheet size, must be tested and approved by the Xerox Media & Compatibles Technology Center.*

When purchasing a particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met.

CUSTOM media may be ordered through the Xerox Supply Account Manager.

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for easy

migration to future enhancements to the stock library and media

management tools.

Base Size Tested

Best Practices for Operation

8.5 x 11 8.5 x 14 17 x 11 18 x 12 Other Size

Weight of 500

sheets of the

paper specific

to grade type

Weight of the

paper in grams

per square

meter

Sides Coated Coating Type Cleanup FinishType Sequence Color

Thickness
(microns)

Textured

Cards

Basis Weight

(lb)

Grammage

Weight (gsm)

Xerox iGen4 90/110 Digital Production Press, Xerox iGen4 220 Perfecting Press, and iGen4 Xerox Automated Packaging Solution configuration North America Custom Media List February, 2011

The Xerox CUSTOM Media List contains custom media that has been tested on the Xerox iGen4 90/110 Digital Production Press for image quality and performance.

Custom media on this list are digitally optimized, designed and manufactured for performance in Xerox digital printing equipment.

Best Practices for Operation are outlined below.

Customers should validate the Best Practices for Operation are acceptable for their application.

*Any alterations to the product's basic design, including sheet size, must be tested and approved by the Xerox Media & Compatibles Technology Center.*

When purchasing a particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met.

CUSTOM media may be ordered through the Xerox Supply Account Manager.

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for easy

migration to future enhancements to the stock library and media

management tools.

Base Size Tested

Best Practices for Operation

8.5 x 11 8.5 x 14 17 x 11 18 x 12 Other Size

Weight of 500

sheets of the

paper specific

to grade type

Weight of the

paper in grams

per square

meter

Sides Coated Coating Type Cleanup FinishType Sequence Color

Thickness
(microns)

XeroxValuPeel U 2up

(Xerox ValuPeelCard Uncoated 2 up)

X X 80 216 Uncoated N/A Plain 0 White 194 No Regular

For uniform image quality do not image within 5 mm of card edge.
Load and stack 50-100 sheets maximum due to media structure.

It is recommended to not image on back if laminated.

TAB may need to be cleaned prior to running media.

XeroxValuPerf U 1up

(Xerox ValuPerfCard Uncoated 1 up)

X X 80 216 Uncoated N/A Plain 0 White 194 No Regular

For uniform image quality do not image within 5 mm of card edge.
Load and stack 50-100 sheets maximum due to media structure.

It is recommended to not image on back if laminated.

XeroxValuPerf U 2up

(Xerox ValuPerfCard Uncoated 2 up)

X X 80 216 Uncoated N/A Plain 0 White 194 No Regular

For uniform image quality do not image within 5 mm of card edge.
Load and stack 50-100 sheets maximum due to media structure.

It is recommended to not image on back if laminated.

XeroxEverflat80

(Xerox Everflat Paper 80lb cover)

X 80 210

C2S (Coated

Two Sides

)

Gloss Plain 0 White 191 Yes Smooth

Color difference if imaging on mylar

No image in gutter of the myla

r

XeroxAccPix

(Xerox Accordion Pix)

X 60 215 Uncoate

dN/A

Plain 0 White 244 Yes Regula

r

Simplex only recommended

For uniform image quality, do not image within 3 mm of label edges.

Ima

ging

over die cuts or label edges may adversely affect fuser roll lif

e

XeroxFunFlip

(Xerox Fun Flips)

X 60 230 Uncoate

dN/A

Plain 0 White 234 Yes Regula

r

Simplex only recommended

For uniform image quality, do not image within 3 mm of label edges.

Ima

ging

over die cuts or label edges may adversely affect fuser roll lif

e

XeroxPortPix

(Xerox Portrait Pix)

X 65 243

C1S (Coated

One Side

)

Gloss Plain 0 White 262 Yes Smooth

Simplex only recommended

For uniform image quality, do not image within 3 mm of label edges.

Imaging over die cuts or label edges may adversely affect fuser roll lif

e

XeroxSportPix

(Xerox Sports Pix)

X 80 280

C2S (Coated

Two Sides

)

Gloss Plain 0 White 246 Yes Smooth

Simplex only recommended

For uniform image quality, do not image within 3 mm of label edges.

Imaging over die cuts or label edges may adversely affect fuser roll lif

e

XeroxTransCr 40

(Xerox Translucent 40 lb. Bond Cream)

X 40 150

C2S (Coated

Two Sides)

Matte Plain 0 White 121 No Smooth Simplex only recommended

XeroxTransFL 40

(Xerox Translucent 40 lb Bond Fine Line)

X 40 150

C2S (Coated

Two Sides)

Matte Plain 0 White 121 No Smooth Simplex only recommended

XeroxTransOx 40

(Xerox Translucent 40 lb Bond Oxford)

X 40 150

C2S (Coated

Two Sides)

Matte Plain 0 White 121 No Smooth Simplex only recommended

XeroxTransWh 40

(Xerox Translucent40 lb Bond White)

X 40 150

C2S (Coated

Two Sides)

Matte Plain 0 White 121 No Smooth Simplex only recommended

XeroxCSelfMailer

(Xerox Coated Self Mailer)

X 200

C2S (Coated

Two Sides)

Gloss Plain 0 White 116 No Smooth

For best image quality do not image over the perforations.

Imaging over die cuts or label edges my adversely affect fuser roll life.

XeroxPreMatteLabel

(Xerox Premium Matte Laser Label)

X 195

C1S (Coated

One Side)

Matte Plain 0 White 173 No Smooth

This media may have a mottled appearance due to poor paper formation (image density and gloss).

For uniform image quality, do not image within 3 mm of label edges.

Imaging over die cuts or label edges may adversely affect fuser roll life.

Simplex only recommended

XeroxLabelsVinyl

(Xerox Vinyl Labels)

X 274

C1S (Coated

One Side)

Gloss Plain 0 White 254 No Smooth

For uniform image quality, do not image within 5 mm of score.

Imaging over die cuts or label edges may adversely affect fuser roll life.

For additional image quality tips please contact the media hotline.

Please contact your Supplies Account manager for product availability.

Simplex only recommended.

XeroxLabelsVinylW

(Xerox White Vinyl Labels)

X 274

C1S (Coated

One Side)

Gloss Plain 0 White 254 No Smooth

For uniform image quality, do not image within 5 mm of score.

Imaging over die cuts or label edges may adversely affect fuser roll life.

For additional image quality tips please contact the media hotline.

Labels

Translucents

Mail / Envelopes

Photo Application Products

Basis Weight

(lb)

Grammage

Weight (gsm)

Xerox iGen4 90/110 Digital Production Press, Xerox iGen4 220 Perfecting Press, and iGen4 Xerox Automated Packaging Solution configuration North America Custom Media List February, 2011

The Xerox CUSTOM Media List contains custom media that has been tested on the Xerox iGen4 90/110 Digital Production Press for image quality and performance.

Custom media on this list are digitally optimized, designed and manufactured for performance in Xerox digital printing equipment.

Best Practices for Operation are outlined below.

Customers should validate the Best Practices for Operation are acceptable for their application.

*Any alterations to the product's basic design, including sheet size, must be tested and approved by the Xerox Media & Compatibles Technology Center.*

When purchasing a particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met.

CUSTOM media may be ordered through the Xerox Supply Account Manager.

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for easy

migration to future enhancements to the stock library and media

management tools.

Base Size Tested

Best Practices for Operation

8.5 x 11 8.5 x 14 17 x 11 18 x 12 Other Size

Weight of 500

sheets of the

paper specific

to grade type

Weight of the

paper in grams

per square

meter

Sides Coated Coating Type Cleanup FinishType Sequence Color

Thickness
(microns)

For best performance it is recommended that these media be stored and run at a relative humidity between 50-

55% and temperature between 68 - 73 F.

A

ssure packaging board has adequately acclimated to the conditions in which it is to be printed.

Requires setup to the Xerox Automated Packaging Solution Configuration.

XeroxFoldingBoard14pt

(Xerox Folding Board 14 pt)

X X 14.33 x 22.5 256

C1S (Coated

One Side)

High-gloss Plain 0 White 356 Yes Smooth

Recommend Simplex only.

This media may react adversely in dry environmental conditions.

XeroxDCtd1Side15pt

(Xerox Digital Coated C1S Board 15 pt.)

14.33 x 22.5 270

C1S (Coated

One Side)

Gloss Plain 0 White 379 Yes Smooth

Recommend Simplex only.

This media may react adversely in dry environmental conditions.

XeroxLasoBoard18pt

(Xerox LasoBoard 18 pt.)

X 14.33 x 22.5 335

C1S (Coated

One Side)

Gloss Plain 0 White 462 Yes Smooth

Recommend Simplex only.

This media may react adversely in dry environmental conditions.

XeroxFoldingBoard18pt

(Xerox Folding Board 18 pt.)

X X 350

C1S (Coated

One Side)

High-gloss Plain 0 White 462 Yes Smooth

Recommend Simplex only.

This media may react adversely in dry environmental conditions.

XeroxCCNB18pt

(Xerox Clay Coated News Back 18 pt.)

X 350

C1S (Coated

One Side)

Gloss Plain 0 White 472 Yes Smooth

Recommend Simplex only.

This media may react adversely in dry environmental conditions.

XeroxProColorPBTran17

(Xerox Production Color Paper Backed Transparency 11 x 17)

X 180

C1S (Coated

One Side)

Gloss Transparency 0 Clear 187 No Smooth

This media may have a mottled appearance due to poor paper formation (image density and gloss).

Simplex only recommended

Static build up may affect media runnability and/or stacking.

Output to top tray only. 80 sheets.

Do not invert.

XeroxDuraPaper 12pt

(Xerox DuraPaper 12 pt)

X 220 Uncoated N/A Plain 0 White 305 No Regular

If image permanence adjustment is required, refer to ADJ 1-Pressure Roll Contact Arc Adjustment procedure in

the latest Customer Maintenance Manual.

Static build up may affect media runnability and/or stacking.

Auto Duplex side to side registration may not be within 1.5mm due to composition of the media.

TAB Blade may need to be cleaned during run.

XeroxVinWinDecalFC

(Xerox Vinyl Window Decal Frosty Clear Stock #344)

X X X 220

C1S (Coated

One Side)

Gloss Custom 0 White 258 No Smooth

Simplex only recommended

Static build up may affect media runnability and/or stacking.

XeroxVinWinDecalW

(Xerox Vinyl Window Decal White Stock #309)

X X X 220

C1S (Coated

One Side)

Gloss Custom 0 White 258 No Smooth

Simplex only recommended

Static build up may affect media runnability and/or stacking.

XeroxDuraPaper 14pt

(Xerox DuraPaper 14 pt)

X 247 Uncoated N/A Plain 0 White 356 No Regular

If image permanence adjustment is required, refer to ADJ 1-Pressure Roll Contact Arc Adjustment procedure in

the latest Customer Maintenance Manual.

Static build up may affect media runnability and/or stacking.

Auto Duplex side to side registration may not be within 1.5mm due to composition of the media.

TAB Blade may need to be cleaned during run.

XeroxPolyPaper 8mil

(Xerox Polyester Paper 8 mil)

X X 14.33 x 20.5 258

C2S (Coated

Two Sides)

Gloss Plain 0 White 195 No Smooth

Static build up may affect media runnability and/or stacking.

Some side to side color difference may be seen if auto duplexing.

Some skew may be seen if auto duplexing.

XeroxVinWinClingFC

(Xerox Vinyl Window Cling Frosty Clear Stock #405)

X 260

C1S (Coated

One Side)

Gloss Custom 0 White 429 No Smooth

Simplex only recommended

Static build up may affect media runnability and/or stacking.

XeroxVinWinClingW

(Xerox Vinyl Window Cling White Stock #318)

X 260

C1S (Coated

One Side)

Gloss Custom 0 White 429 No Smooth

Simplex only recommended

Static build up may affect media runnability and/or stacking.

XeroxDuraKote

(Xerox DuraKote 10 pt)

X 300

C2S (Coated

Two Sides)

Gloss Plain 0 White 249 Yes Smooth Static build up may affect media runnability and/or stacking.

XeroxPolyPaper 11mil

(Xerox Polyester Paper 11 mil)

X 14.33 x 20.5 350

C2S (Coated

Two Sides)

Gloss Plain 0 White 270 No Smooth

Static build up may affect media runnability and/or stacking.

Some side to side color difference may be seen if auto duplexing.

Some skew may be seen if auto duplexing.

Feed from a lower tray.

High static may impact inline finishing.

XeroxPolyPaper 14mil

(Xerox Polyester Paper 14 mil)

X 14.33 x 20.5 350

C2S (Coated

Two Sides)

Gloss Plain 0 White 350 No Smooth

Static build up may affect media runnability and/or stacking.

Some side to side color difference may be seen if auto duplexing.

Some skew may be seen if auto duplexing.

Feed from a lower tray.

High static may impact inline finishing.

XeroxUltraMagnet

(Xerox Ultra Magnet)

X 350

C1S (Coated

One Side)

Gloss Plain 0 White 439 No Smooth

Simplex only recommended

Static build up may affect media runnability and/or stacking.

Feed from a lower tray only.

To enable running toggle NVM 12509 (Lower Tray Multifeed Detected FLTByp).

To enable running Service must set NVM 6876 (LE Late tat TAR sensor Jam Offset) to maximum value.

Output to top tray or bypass tray, if enabled.

Skew up to 10mm may be seen.

For best image quality do not image within 40 mm of lead or trail edges of the media.

Packaging Board

Other

Product Description

Weight g/m

2

Coating type Size Application

Number of
sheets run

Image

Quality

Image

Permanence

Runnability

Auto

Duplex

Date of

test

Notes

Xerox Guaranteed Media

Alternative

Uncoated

Catalina Opaque

53 Uncoated 8.5 x 14 550 Yes Jul-05 High output curl caused frequent stacker faults. N/A

Soporset offset

58 Uncoated 11 x 17 1,924 Yes Oct-10 Marginal Post-fuser curl

Lynx - Opaque

59 Uncoated 12 x 18 1.925

Not

recommended

Yes Nov - '09

Cascade 16 lb bond

60 Uncoated 8.5 x 11 5000 No May-04

The following are recommended for lightweight papers: Program simplex only. Low to moderate

area coverage. Program job face down. 12 mm minimum non-imaged area at lead edge. Limit

stacker output to 500 sheets max. May require decurler manual adjustment.

N/A

Domtar Windsor Offset Text

60 Uncoated 8.5 x 11 2600 yes Oct- 2006 Xerox Color Xpressions 24 lb

Newsprint 40 lb Offset

60 Uncoated 9 x 12 legislative bills 4000 Yes Jun-05 Some image degradaion on solids due to paper formation. N/A

Domtar 45# Lynx Digital

67 Uncoated 8.5 x 11 2,125 Not recommended Yes Aug-10 Some bent corners in the stack

Appleton 45# Lightweight

70 Uncoated 11.75 x 18 11 Yes Feb-11

Domtar 50# Lynx Digital

74 Uncoated 8.5 x 11 5,000 Yes Aug-10

Rolland Hi-Tech 50% R

74 Uncoated 11 x 17 475 Yes May-10 recycled 50%

Wausau 50 lb Text Exact Opaque White

74 Uncoated 11 x 17 7400 yes 7/07 Some stacking issues

Williamsburg offset 50 lb Smooth

74 Uncoated 12 x18 60 Yes May-06 curl N/A

20 lb. GP Spectrum

75 Uncoated 11 x 17 3750 yes 11/07 best image quality at non-nominal settings

Harbor 100% recycled

75 Uncoated 8.5 x 11 1800 Yes Nov-08 Marginal Curl Xerox Color Xpressions Planet 100

NetPrint Meteor 20 lb Bond

75 Uncoated 8.5 x 11 4000 yes Aug- 2006 mottle image artifact Xerox Business 4200

Paperline

75 Uncoated 11 x17 1,000 Yes Dec - '09

Weyerhaeuser Cougar Opaque 50 lb.

Offset

75 Uncoated Multiple 5000 Yes Jun-04

This media may have a mottled appearance due to poor paper formation

(image density and gloss).

N/A

Green - Good test results, purchase a small quantity to insure expectations are met.

Yellow - Customer should validate the limitations are acceptable for their application. Potential for increased service.

Not Recommended

Xerox iGen4 90/110 Digital Production Press, Xerox iGen4 220 Perfecting Press, and iGen4 Xerox Automated Packaging Solution configuration North America Tested Media List February, 2011

The Non-Xerox Tested Media List contains non-Xerox branded paper and specialty media. Xerox has tested many media products on the Xerox iGen4 90/110 Digital Production Press and based on such testing have published this list of tested media products which may or may not, at the time of and based upon such testing, meet Xerox performance criteria. No subsequent
testing has been done and therefore no determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.

Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use, consistency or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a

particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met. For guaranteed best performance, use digitally optimized paper and specialty media from Xerox Supplies.

NOT RECOMMENDED

Not recommended