Page 1 / 7
SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006 as amended
______________________________________________________________________________________________
SDS # : A-1033
Issuing Date 2006-08-28 Revision Date 2016-09-01 Version 2
Toner - Black
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
1.1 Product identifier
Product Name Toner for Phaser 3300 MFP, Phaser 3428, Phaser 3435, WorkCentre 3550,
Phaser 3635 MFP, Phaser 3320, WorkCentre 3315, WorkCentre 3325, Phaser
3052, Phaser 3260, WorkCentre 3215, WorkCentre 3225, Phaser 3330,
WorkCentre 3335, WorkCentre 3345
Part no.
Color
1.2 Relevant identified uses of the substance or mixture and uses advised against
Recommended Use
1.3 Details of the supplier of the safety data sheet
106R01245, 106R01246, 106R01411, 106R01412, 106R01414, 106R01415, 106R01527,
106R01528, 106R01529, 106R01530, 106R01531, 106R02304, 106R02305, 106R02306,
106R02307, 106R02308, 106R02309, 106R02310, 106R02311, 106R02312, 106R02313,
106R02626, 106R02651, 106R02775, 106R02777, 106R02778, 106R02782, 106R03620,
106R03621, 106R03622, 106R03623, 106R03624, 106R03625, 108R00792, 108R00793,
108R00794, 108R00795, 108R00796, 650N05408, 650N05434, 650N05436
Black
Xerographic printing
Supplier
For further information, please contact
Contact person
Phone
Fax
E-mail address
1.4 Emergency telephone
Not applicable
Xerox Ltd.
Xerox Environment, Health & Safety
Bessemer Road
Welwyn Garden City
Herts. AL7 1HE
UK
Manager, Environment, Health, Safety
& Sustainability
++44 (0)1707 353434
ehs-europe@xerox.com
2. HAZARDS IDENTIFICATION
2.1 Classification of the substance or mixture
According to present data no classification and labelling is required according to Regulation (EC) No 1272/2008.
2.2 Label elements
None
2.3 Other hazards
Page 2 / 7
______________________________________________________________________________________________
SDS # : A-1033
Toner - Black
Issuing Date 2006-08-28 Revision Date 2016-09-01 Version 2
______________________________________________________________________________________________
No hazard expected under normal conditions of use
3. COMPOSITION/INFORMATION ON INGREDIENTS
3.1 Mixtures
Chemical Name Weight % CAS No. EC-No Classification (Reg.
1272/2008)
Polyester resin >80 117581-13-2 Not listed None
Carbon Black <10 1333-86-4 215-609-9 None 01-2119384822-32-00
Amorphous silica <2 7631-86-9 231-545-4 None
Silica, treated 1.0-2.0 68909-20-6 272-697-1 None
Polyolefin 0.5-2.0 9010-79-1 Not listed None
Wax 1 8015-86-9 Not listed None
REACH Registration
Number
65
Note
Components marked as "Not Listed" are exempt from registration.
4. FIRST AID MEASURES
4.1 Description of first-aid measures
General advice
For external use only. When symptoms persist or in all cases of doubt seek medical advice.
Show this material safety data sheet to the doctor in attendance.
Eye contact
Immediately flush with plenty of water. After initial flushing, remove any contact lenses and
continue flushing for at least 15 minutes
Skin contact
Inhalation
Ingestion
Wash skin with soap and water
Move to fresh air
Rinse mouth with water and afterwards drink plenty of water or milk
4.2 Most important symptoms and effects, both acute and delayed
Acute Toxicity
Eyes
Skin
Inhalation
Ingestion
No known effect
No known effect
No known effect
No known effect
Chronic effects
Main symptoms Overexposure may cause:
mild respiratory irritation similar to nuisance dust.
4.3 Indication of immediate medical attention and special treatment needed
Protection of first-aiders
Notes to physician
No special protective equipment required
Treat symptomatically
5. FIRE-FIGHTING MEASURES
5.1 Extinguishing media
Page 3 / 7
______________________________________________________________________________________________
SDS # : A-1033
Issuing Date 2006-08-28 Revision Date 2016-09-01 Version 2
Toner - Black
______________________________________________________________________________________________
Suitable extinguishing media
Unsuitable extinguishing media
5.2 Special hazards arising from the substance or mixture
Fine dust dispersed in air, in sufficient concentrations, and in the presence of an ignition source is a potential dust explosion
hazard
5.3 Special protective actions for fire-fighters
In the event of fire and/or explosion do not breathe fumes. Wear fire/flame resistant/retardant clothing. Use self-contained
pressure-demand breathing apparatus if needed to prevent exposure to smoke or airborne toxins.
Wear self-contained breathing apparatus and protective suit.
Other information
Flammable properties
Flash point
Hazardous combustion products
Use water spray or fog; do not use straight streams, Foam
Do not use a solid water stream as it may scatter and spread fire
Not flammable. Will not readily ignite.
Not applicable
Hazardous decomposition products due to incomplete combustion, Carbon oxides, Nitrogen
oxides (NOx)
6. ACCIDENTAL RELEASE MEASURES
6.1 Personal precautions, protective equipment and emergency procedures
Avoid breathing dust
6.2 Environmental precautions
No special environmental precautions required
6.3 Methods and materials for containment and cleaning up
Use a vacuum cleaner to remove excess, then wash with COLD water. Hot water fuses the toner making it difficult to remove.
6.4 Reference to other sections
None
7. HANDLING AND STORAGE
7.1 Precautions for safe handling
Handle in accordance with good industrial hygiene and safety practice, Avoid dust accumulation in enclosed space, Prevent
dust cloud
7.2 Conditions for safe storage, including any incompatibilities
Keep container tightly closed in a dry and well-ventilated place, Store at room temperature
7.3 Specific end uses
Page 4 / 7
______________________________________________________________________________________________
SDS # : A-1033
Issuing Date 2006-08-28 Revision Date 2016-09-01 Version 2
Toner - Black
______________________________________________________________________________________________
Xerographic printing
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 Control parameters
Xerox Exposure Limit
Xerox Exposure Limit
8.2 Exposure controls
Engineering measures
8.3 Individual protection measures, such as personal protective equipment (PPE)
Respiratory protection
Eye/Face protection
Skin and body protection
Hand protection
2.5 mg/m3 (total dust)
0.4 mg/m3 (respirable dust)
None under normal use conditions
No special protective equipment required
No special protective equipment required
No special protective equipment required
No special protective equipment required
9. PHYSICAL AND CHEMICAL PROPERTIES
9.1 Information on basic physical and chemical properties
Appearance
Odor threshold
pH
Flash point
Softening point
Flammability Limits in Air
Vapor pressure
Vapor density
Water solubility
Viscosity
Partition coefficient
Evaporation rate
Melting point/range
Freezing point
Decomposition temperature
Specific gravity
9.2 Other information
Explosive properties
Powder
Not applicable
Not applicable
Not applicable
49 - 60 °C / 120
- 140 °F
Not applicable
Not applicable
Not applicable
Negligible
Not applicable
Not applicable
Not applicable
Not determined
Not applicable
Not determined
~ 1
Fine dust dispersed in air, in sufficient concentrations, and in the presence of an ignition
source is a potential dust explosion hazard
10. STABILITY AND REACTIVITY
Odor
Physical state
Color
Boiling point/range
Autoignition temperature
Faint
Solid
Black
Not applicable
Not applicable
10.1 Reactivity
Page 5 / 7
______________________________________________________________________________________________
SDS # : A-1033
Issuing Date 2006-08-28 Revision Date 2016-09-01 Version 2
Toner - Black
______________________________________________________________________________________________
No dangerous reaction known under conditions of normal use
10.2 Chemical stability
Stable under normal conditions
10.3 Possibility of hazardous reactions
Hazardous reactions
Hazardous polymerization
10.4 Conditions to avoid
Prevent dust cloud, Fine dust dispersed in air, in sufficient concentrations, and in the presence of an ignition source is a
potential dust explosion hazard
10.5 Incompatible materials to avoid
None
10.6 Hazardous decomposition products
None under normal processing
Hazardous polymerization does not occur
None under normal use
11. TOXICOLOGICAL INFORMATION
The toxicity data noted below is based on the test results of similar reprographic materials.
11.1 Information on toxicological effects
Acute Toxicity
Product Information
Irritation
Oral LD50
Dermal LD50
LC50 Inhalation
Chronic toxicity
Product Information
Chronic effects
Carcinogenicity
Other toxic effects
Product Information
Sensitization
Mutagenic effects
Target organ effects
Other adverse effects
Aspiration Hazard
.
No skin irritation, No eye irritation
> 5 g/kg (rat)
> 5 g/kg (rabbit)
> 5 mg/L (rat, 4 hr)
No known effects under normal use conditions
Not classifiable as a human carcinogen
No sensitization responses were observed
Not mutagenic in AMES Test
None known
None known
Not applicable
12. ECOLOGICAL INFORMATION
12.1 Toxicity
Page 6 / 7
______________________________________________________________________________________________
SDS # : A-1033
Issuing Date 2006-08-28 Revision Date 2016-09-01 Version 2
Toner - Black
______________________________________________________________________________________________
Acute Aquatic Toxicity
Chronic Aquatic Toxicity
12.2 Persistence and degradability
Not readily biodegradable
12.3 Bioaccumulative potential
Bioaccumulation is unlikely
12.4 Mobility in soil
Insoluble in water
12.5 Results of PBT and vPvB assessment
Not a PBT according to REACH Annex XIII
12.6 Other adverse effects
Presents little or no hazard to the environment
On available data, substance is not harmful to aquatic life.
On available data, substance is not harmful to aquatic life.
13. DISPOSAL CONSIDERATIONS
13.1 Disposal considerations
Waste Disposal Method
EWC Waste Disposal No
14. TRANSPORT INFORMATION
14.1 UN/ID No
Not regulated
14.2 Proper shipping name
Not regulated
14.3 Transport hazard class(es)
Not classified
14.4 Packing Group
Not applicable
14.5 Environmental hazards
No special precautions are needed in handling this material
08 03 18
Presents little or no hazard to the environment
Page 7 / 7
______________________________________________________________________________________________
SDS # : A-1033
Issuing Date 2006-08-28 Revision Date 2016-09-01 Version 2
Toner - Black
______________________________________________________________________________________________
14.6 Special precautions for users
No special precautions are needed in handling this material
14.7 Transport in bulk according to MARPOL 73/78 and the IBC Code
Not applicable
15. REGULATORY INFORMATION
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
According to present data no classification and labelling is required according to Regulation (EC) No 1272/2008.
15.2 Chemical Safety Assessment
Not applicable
16. OTHER INFORMATION
Issuing Date
Revision Date
Revision Note
This safety data sheet complies with the requirements of Regulation (EC) No. 1272/2008 as amended .
Disclaimer
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at
the date of its publication. The information given is designed only as a guidance for safe handling, use, processing,
storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The
information relates only to the specific material designated and may not be valid for such material used in
combination with any other materials or in any process, unless specified in the text.
2006-08-28
2016-09-01
Part number(s) 650N05434, 650N05436, 106R03620, 106R03621, 106R03622,
106R03623, 106R03624, 106R03625 added
Model(s) Phaser 3330, WorkCentre 3335, WorkCentre 3345 added
Loading...