Xerox 100 User Manual

Product Safety Data Sheet XEROX

Product: Nuvera 100 EA Digital Production System PSDS No.: 0997 Nuvera 120 EA Digital Production System ISSUE DATE: 5/08/2007 REV. DATE:

Section I - Product Identification Manufacturer's Name Emergency No. EH&S Inquiries

Xerox Corporation (585) 422-2177 (800) 828-6571

Manufacturer's Address Rochester, N.Y.

Product Designation Product Identifier:

Nuvera 100 EA Digital Production System Print Engine: ZJC-1 Nuvera 120 EA Digital Production System Feeder & Scanner: ZJC-2 Multifunction Finisher: ZJC-3

Section II - Electrical Information

Line Voltage Line Current Freq. Branch Cir. Protection (Volts) (Amps) (Hertz) (Amps)

Print Engine 115-127/200-220 24A or 40A 50/60 30A or 50A Feeder 200-240 10A 50/60 20A Finisher: 200-240 8A 50/60 20A

Line Cord/Plug Specification Power Consumption(Watts)

Running: 3402 Print Engine: 24A - Two phase, 3 wire + PE Standby: 592 NEMA 14-30P Plug (Single Cord) Sleep Mode: 100 Or Print Engine: 40A - Two phase, 3 wire +PE NEMA 14-50P Plug (Single Cord) Feeder, Finisher: Single phase, 2 wire + PE NEMA 6-20P Plug (Single Cord)

Agency Approvals UL & cUL: E51242 – UL 60950-1, First Edition CE: IEC 60950-1 (2001) First Edition Section III - Supplies Xerox Part No. Material Safety Data Sheet EA Black Dry Ink 6R1261/6R90357/502S67796 P-7006 EA Developer 502S31863 B-2012

Section IV - Environmental Information Product Size Heat Emission* Environmental Limitations

(Inches) (BTU/HR) Min Max D: 29.0” Running: 11,600 Relative Humidity (%) 15 85 W: 83.5” Standby: 2018 Ambient Temp. ( H: 61”

Floor Space Requirements Weight

(inches) 112” D, 94” W, 74” H 1,283 (Lbs.) / 582 kgs

(Common configuration – see Installation Guide for more information on other product configuration

C) 10 32

www.xerox.com Reference “About Xerox”

Product: Nuvera 100 EA Digital Production System PSDS No.: 0997 Nuvera 120 EA Digital Production System

Section V - Emission/Exposure Information

Light Source FDA Accession No.

Class 1 laser system for xerographic exposure. 0320931-00 There is no access to laser light during operation/maintenance or service.

Electromagnetic Emissions

US FCC: Class A Canada DOC: Class A

Audible Noise

Run dBA: 64 Bel(A): 8.1 Standby dBA: 40 Bel(A): 5.7 Impulse dBA: 70

Chemical Emission Testing per ECMA 328 Ozone – 0.02 mg/m

Concentration Based on Simulation Model: Daily Copy Volume 57,600 impression / 8 hours Room Size 47 m3

Particulates – 0.025 mg/m

TVOC’s – 0.009 mg/m

Section VI - Product Recycling and Disposal

Xerox operates a worldwide equipment takeback and reuse/recycle program. Contact your Xerox sales representative (1-800-ASK-XEROX) to determine whether this Xerox product is part of the program. For more information about Xerox environmental programs, visit

www.xerox.com/environment

If you are managing the disposal of your Xerox product, please note that the product contains lead, mercury and other materials whose disposal may be regulated due to environmental considerations. The presence of lead and mercury is fully consistent with global regulations applicable at the time that the product was placed on the market. For recycling and disposal information, contact your local authorities. In the United States, you may also refer to the Electronic Industries Alliance web site: www.eiae.org

All measurements were made on products performing within established operating specifications and received recommended maintenance procedures. Xerox certifies that this product meets or exceeds the applicable standards for safety and emissions.

www.xerox.com

Reference “About Xerox”