Seller warrants that its products ("Product(s)") will meet the specifications set forth in its catalog
from time to time, unless the Buyer is notified otherwise prior to delivery. Seller will, without
charge, repair or provide a replacement for any of the Products which prove to be defective in
materials or workmanship within one (1) year from the date of shipment ("Warranty Period").
If, within the Warranty Period, Buyer discovers a defect in materials or workmanship which
interferes with the operation of any Product, Buyer must promptly notify Seller, in writing, of such
defect. Seller's sole obligation to Buyer under this Warranty is to repair and correct any defect in
material or workmanship, or provide a replacement Product to Buyer. Seller's decision with
respect to the applicability of this Warranty to any defect shall be final and conclusive. Seller
reserves the right to require Buyer, at Buyer's sole cost and expense, to return any defective
Product, including any alterations made thereto, F.O.B. Seller's factory in Ohio.
Seller does not warrant against abrasion, corrosion or erosion. Seller shall not be liable to Buyer or
to any other person for work done or repairs made, to remedy any defect, by any person who is not
an authorized representative of Seller, unless Seller's written consent is first obtained by Buyer.
This Warranty does not apply to, and is rendered null and void by, any Product which, after
leaving Seller's manufacturing plant: (a) is repaired or altered without Seller's prior written
approval; (b) is the subject of improper storage, installation or operation; (c) is the subject of
intentional or negligent misuse, misapplication, neglect or accident; or (d) is not used, repaired or
altered in accordance with Seller's written instructions.
Seller expressly reserves the right to declare this Warranty null and void upon Buyer's failure to
make full and timely payments with respect to any Products purchased by Buyer from Seller, in
which event all of Seller's obligations, and Buyer's rights, under this Warranty, shall immediately
terminate. SELLER DISCLAIMS THE IMPLIED WARRANTY OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, AND ANY IMPLIED WARRANTIES
ARISING FROM COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF
TRADE. SELLER SHALL NOT BE LIABLE TO BUYER OR ANY OTHER PARTY UNDER
THIS WARRANTY FOR DIRECT, SPECIAL, CONSEQUENTIAL, INDIRECT OR
INCIDENTAL DAMAGES OF ANY KIND.
Notice to the User
The information contained in this manual is believed to be correct. However,
Xenotronix/TLI, Inc. assumes no responsibility for any inaccuracies therein.
Information in this manual is subject to change without notice. No part of this manual may
be reproduced or transmitted in any form, electronic or mechanical, for any purpose, without
the express written permission of Xenotronix/TLI, Inc.
SAVE THESE INSTRUCTIONS - This manual contains important safety and operating
instructions for Model HPX10 Battery Chargers. Before using the battery charger, please
read all instructions and cautionary markings on the battery charger, the battery, and the
product using the battery.
CAUTION - To reduce the risk of electric shock:
o Do not expose unit to rain or moisture.
o Do not remove cover. There are no user serviceable parts inside. Refer service to
qualified service personnel.
o Connect the battery charger directly to a grounding receptacle. An adaptor
should not be used with this unit. This unit is equipped with a power plug having
an equipment grounding conductor (3-prong). The unit must be plugged into an
outlet that has been properly installed and grounded in accordance with all local
and national codes and ordinances.
o Disconnect charger from AC power and battery before attempting any
maintenance or cleaning. Turning off controls may not reduce this risk.
WARNING
o Charge only sealed or valve regulated, lead-acid, non-automotive, maintenance
free rechargeable batteries. Attempting to charge other types of batteries may
result in personal injury and battery damage.
o The enclosure (metal face) may become hot during the charge cycle - DO NOT
TOUCH!
o Where hydrogen gas may be present, connect or disconnect the output
connectors only when the unit is disconnected from AC power or arcing and
burning may result.
DANGER - Never alter power plug blades or ground pin. If it will not fit the outlet, have
a proper outlet installed by an electrician. Improper connection will result in the risk of an
electric shock or fire.
Make sure cords are located so that they will not be stepped on, tripped over, or otherwise
subjected to damage or stress. Do not operate this unit with a damaged cord or plug replace them immediately. To reduce the risk of damage to electric plug, pull by unit
body rather than output cord when disconnecting unit.
Do not operate charger if it has received a sharp blow, been dropped, or otherwise
damaged in any way. Do not disassemble charger; incorrect reassembly will result in the
risk of an electric shock or fire. Refer service to qualified service personnel.
Allow space around unit and adequate air circulation to reduce internal heat buildup. Do
not block vents or operate in a small, enclosed space.
Xenotronix/TLI 1
Loading...
+ 7 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.