XENO XLCDHDA21W User Manual

TFT LCD MONITOR

MODEL: XCLD21HDAW

USER’S

MANUAL

Contents

1. Scope ............................................................................................................................... 6

2.1 Power Supply ............................................................................................................. 6

2.2 Video Characteristics ................................................................................................. 6

2.3 PC Input ..................................................................................................................... 6

2.4 Audio Input ................................................................................................................. 6

2.5 Environmental ............................................................................................................ 6

2.6 EDID ........................................................................................................................... 7

2.7 Connectors ................................................................................................................. 7

3. Controls and indicators .................................................................................................... 8

3.1 PC menu .................................................................................................................... 9

3.2 Audio menu ................................................................................................................ 9

3.3 OSD menu ............................................................................................................... 10

3.4 Geometry menu........................................................................................................ 10

4. Channel selection .......................................................................................................... 11

6. Certification .................................................................................................................... 11

6.1 Safety Approvals ...................................................................................................... 11

6.2 EMI/EMS Emission Approvals. ................................................................................. 11

7. Mechanical ..................................................................................................................... 12

7.1 Dimensions .............................................................................................................. 12

Before You Begin

Read these instructions before installing or operating this product.

Note: This installation should be made by a qualified service person and should conform to local codes.
This manual provides installation and operation information. To use this document, you must have the following
minimum qualifications:

 A basic knowledge of CCTV systems and components
 A basic knowledge of electrical wiring and low-voltage electrical connections

Intended use

Only use this product for its designated purpose; refer to the product specification and user documentation.
Customer Support
For assistance in installing, operating, maintaining and troubleshooting this product refer to this document and any other

documentation provided. If you still have questions, please contact Norbain Technical Support and Sales:

Norbain SD Ltd, 210 Wharfedale Road, IQ Winnersh, Wokingham, Berkshire RG41 5TP, England.
UK [phone]

Note: You should be at the equipment and ready with details before calling Technical Support.
Conventions Used in this Manual
Boldface or button icons highlight command entries. The following WARNING, CAUTION and Note statements identify

potential hazards that can occur if the equipment is not handled properly:

* WARNING:

Improper use of this equipment can cause severe bodily injury or equipment damage.

** Caution:

Improper use of this equipment can cause equipment damage.

Note: Notes contain important information about a product or procedure.

This apparatus is manufactured to comply with the radio interference.
A Declaration of Conformity in accordance with the following EU standards has been made. The
manufacturer declares that the product supplied with this document is compliant the provisions of the
EMC Directive 2004/108/EC, the CE Marking Directive 93/68 EEC and all associated amendments.

All lead-free products offered by the company comply with the requirements of the European law on the
Restriction of Hazardous Substances (RoHS) directive: 2011/65/EU, which means our manufacture
processes and products are strictly “lead-free” and without the hazardous substances cited in the
directive.

The crossed-out wheeled bin mark symbolizes that within the European Union the product must be
collected separately at the product end-of-life. This applies to your product and any peripherals
marked with this symbol. Do not dispose of these products as unsorted municipal waste.

* This symbol indicates electrical warnings and cautions.
** This symbol indicates general warnings and cautions.

NORBAIN SD LTD reserves the right to make changes to the product and specification of the product from time to time
without prior notice.

WARNINGS AND CAUTIONS:

To reduce the risk of fire or electric shock, do not insert any metallic objects through the ventilation grills or other
openings on the equipment
.

IMPORTANT SAFEGUARDS

1. READ AND RETAIN INSTRUCTIONS

Read the instruction manual before operating the equipment.
Retain the manual for future reference.

2. CLEANING

Turn the unit off and unplug from the power outlet before cleaning. Use a damp cloth for cleaning. Do not use harsh
cleansers or aerosol cleaners.

3. ATTACHMENTS

Do not use attachments unless recommended by manufactured as they may affect the functionality of the unit and
result in the risk of fire, electric shock or injury.

4. MOISTURE

Do not use equipment near water or other liquids.

5. ACCESSORIES

Equipment should be installed in a safe, stable location. Any wall or shelf mounting accessory equipment should be
installed using the manufacture's Instructions. Care should be used when moving heavy equipment. Quick stops,
excessive force, and uneven surfaces may cause the equipment to fall causing serious injury to persons and objects.

6. VENTILATION

Openings in the equipment, if any, are provided for ventilation to ensure reliable operation of the unit and to protect if
from overheating. These openings must not be blocked or covered

7. POWER SOURCES

The equipment should be operated only from the type of power source indicated on the marking label. If you are not
sure of the type of power supplied at the installation location, contact your dealer. For equipment designed to operate
from battery power, refer to the operating instructions.

8. GROUNDING OR POLARIZATION

Equipment that is powered through a polarized plug (a plug with one blade wider than the other) will fit into the power
outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the
plug. Do not defeat the safety purpose of the polarized plug.

9. CORD AND CABLE PROTECTION

Route power cords and cables in such a manner to protect them from damage by being walked on or pinched by
items places upon or against them.

10. LIGHTNING

For protection of the equipment during a lightning storm or when it is left unattended and unused for long periods of
time, unplug the unit from the wall outlet. Disconnect any antennas or cable systems that may be connected to the
equipment.

This will prevent damage to the equipment due to Lightning or power-line surges.

11. OVERLOADING

CAUTION