XENO XBCHDA28V12ALR-1080 Installation And User Manual

Specification

Model

XBCHDA28V12ALR-1080

Pick up Element

1/2.8" SONY 2.4MP CMOS Sensor

Effective Picture
Elements (H×V)

1920 X1080

Resolution

1080P

Minimum Illumination

0.001 Lux/F1.2

S/N Ratio

More than 50dB

Synchronous System

Internal, Negative sync.

IR Distance

60 Meters (with Ф5X72PCS Infrared LED)

IR Power On

Photodiode AUTO Control

Video Output

AHD,CVBS

Power/Current

DC12V(+/-10%)/1000mA

Lens

2.8-12mm Manual zoom lens

Dimension (mm)

255(W) x 110(H) x 105(D)

Weight (g)

1700

Operating Tempera-

ture

-10~+50℃ RH95% MAX

Functions

OSD menu, DWDR, 3DNR,Sense-up

IP Rating

IP66

Accessories list

Thank you for choosing to use this Xeno
Nitro High Definition Analogue camera.

Before providing power for the camera,
please read this manual carefully before use.

Notes:

Do not attempt to disassemble the camera. If the camera
does not work, please contact your supplier.

Name Number

Camera 1

User Guide 1

XBCHDA28V12ALR-1080

Installation and user guide

Main Features

Device connection

Common Problems and Troubleshooting

1.Before using the camera ,please read this manual carefully and
keep it safely for later use.

2.Installation should be undertaken by a professional installation
company and follow manufacturer’s instructions, do not disman­tle.

3.In order to prevent sensor damage, do not expose to intense
light source in long time.

4.Do not touch sensor directly.

5.Please use a dry soft cloth to clean the camera. If the dirt is diffi­cult to clean, use detergent with water and allow to soak, then
gently wipe off.

6.Do not install camera under air conditioning’s air gate, as this
may allow condensation to form on the lens or bubble.

7.Please ensure during installation and cleaning, power is turned
off.

8. While storing and transporting, please ensure the conditions are

within the cameras allowable temperature and humidity range.

9. If for any reason the camera is damaged or does not operate,

please contact your supplier. There are no serviceable parts within.
Any attempt to fix may invalidate the warranty.

Safety instruction

> Auto Gain Control (AGC)

Built-in auto gain control (AGC) circuit. The color camera
can get high definition picture in low light condition.

> Auto Electronic Shutter (AES)

Built-in auto electronic shutter function. The color

camera’s AES speed can reach 1/100,000s.

> OSD button shortcut functions

CVBS MODE: hold left key 5s.

AHD MODE : hold right key 5s.

System switching : hold down key 5s.

> OSD MENU

MAIN
MENU

LENS MANUAL/DC

EXPOSURE

SHUTTER

AUTO,1/30,1/60,FLK,1/240,1/480,1/1000,
1/2000,1/5000,1/10000,1/50000,X2,X4,X6,X8
,X10,X15,X20,X25,X30

AGC

0－15

SENS-UP AUTO(X2-X30)/OFF

BRIGHT-

NESS

0-100

D-WDR OFF/ON

DEFOG OFF/AUTO

BACK LIGHT

OFF

BLC:LEVEL/AREA /DEFAULT

HSBLC:SELECT AREA/DISPLAY/BLACK MASK/LEVEL/

MODE/DEFAULT

WHITE BAL. ATW/AWC→SET/INDOOR/OUTDOOR/MANUAL/AWB

DAY &
NIGHT

EXT D→N(DELAY)/N→D(DELAY)

AUTO

D→N(AGC)/D→N(DELAY)
/N→D(AGC)/N→D(DELAY)

COLOR

B/W BURST/IR SMART/IR PWM

NR

2DNR OFF/LOW/MIDDLE/HIGH

3DNR OFF/LOW/MIDDLE/HIGH

SPECIAL

CAM TITLE OFF/ON

D-EFFECT FREEZE/MIRROR/NEG.IMAGE

MOTION

SELECT AREA1-4/DISPALY/SENSITIVITY
/COLOR/TRANS/ALARM/DEFAULT

PRIVACY OFF/ON

LANGUAGE

ENG/CHN1/CHN2/GER/FRA/ITA

/SPA/POL/RUS/POR/NED/TUR

DEFECT

LIVE DPC

WHITE DPC

BLACK DPC

RS485

CAM ID:0-255

ID DISPLAY

BAUDRATE:2400/4800/9600/19200/38400

ADJUST

SHARPNESS AUTO/OFF

MONITOR LCD/CRT

LSC OFF/ON

VIDEO.OUT PAL/NTSC

> No Picture after providing power
Please check: the voltage bening supplied to the camera,

and connections are correctly made.

> The picture level direction have flowing interference

ripples

May be caused by the power supply AC ripples, may require a

hum rejection transformer.

Check the monitor and peripheral equipments used.

> The picture background color changes continuously

The fluorescent lamp’s electromagnetic field cause color roll.
This is proper phenomenon of the cameras.
Reduce the fluorescent lamp numbers or increase the
distance between the camera and the fluorescent lamps can
improve it.
Use power supply external sync. camera can solve it.

> Interference across complete picture

The power supply’s voltage unstable.
Connecting cables not connect correctly or have high
impedance.

Note:

• Power supply must pass safety certification ,Its output
voltage, current, voltage polarity and operating temper­ ature must match requirement of this equipment.

• Please install lightning protection devices or cut off the
power in thunder and lightning conditions.

• To capture high-quality video and pictures, please make
sure the network connection is stable and smooth.

• Please note the camera’s operating temperature and its
using environment

requirement. Avoid using the camera

at too high or too low temperatures. The operating tem-

perature is -30~+60℃. (Recommendatory operating tem-

perature is -10~+50℃.)

• Do not mount the camera near by the radiator or heater.