UUsseerr MMaannuuaall // IInnssttaallllaattiioonn GGuuiiddee
1122"" LLCCDD TToouucchh MMoonniittoor
r
Warning! The monitor may malfunction if it is operated with a different power supply or if it
is supplied with the incorrect power voltage. Do not expose this unit to rain or moisture as this
may result in fire or electric shock.
Content:
I. FCC Warning Statement ............................................................................... 1
II. Introduction ................................................................................................... 2
Features ................................................................................................................................. 2
Unpacking the monitor .......................................................................................................... 2
III. Installation ..................................................................................................... 4
I/O placement ........................................................................................................................ 4
To PC .................................................................................................................................... 4
Touch D river installation ....................................................................................................... 5
MSR installa tion (o ptional) ................................................................................................... 8
Control Buttons ................................................................................................................... 10
Structure of OSD settings .................................................................................................... 11
IV. For your safety ............................................................................................ 12
V. Support timing chart .................................................................................. 12
VI. Mechanical Dimension: .............................................................................. 12
VII. Product General Specification .................................................................. 13
Version. 1.0
1
I. FCC Warning Statement
WARNING
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
Notice:
(1) An Unshielded-type power cord is required in order to meet FCC emission limits and also to
prevent interference to nearby radio and television reception. It is essential that only the
supplied power cord is used.
(2) Use only shielded cables to connect I/O devices to this equipment.
(3) Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Version. 1.0
2
II. Introduction
The 1200TS is a 12” TFT LCD monitor integrated with a resistive touch panel. Please
contact us for optional MSR and optional 2nd display.
Features
- Optimal display resolution 1024 * 768
- VESA 75 * 75 mm wall mount standard
- Durable and sturdy base design
- Optional 3 track Magnetic Strip Reader (MSR)
- Optional 2nd display (7”/8.4”)
- Adjustable viewing angle up to 90 degrees horizontally
- Low power consumption of only 20W with LED backlight
Unpacking the monitor
- Place the monitor on a clean surface, making sure the box is in an upright position.
Version. 1.0
3
Check accessory
Please make sure all of the following accessories are included:
Standard Items
a. b.
c. d. e.
Optional Item s
a. b.
a. MSR b. 2nd display ( 7” or 8.4” )
a. LCD Monitor
b. VGA cable
c. Touch cable (USB or RS232)
d. Power adaptor
e. Power cable
Version. 1.0
4
III. Installation
I/O placement
1 DC JACK
2 DVI
3 VGA
4 USB B Type
5 Dual USB A Type
6 RS232
7 RJ45(RS232)
To PC
1. Connect VGA cable from monitor to PC
2. Connect USB touch cable to PC
3. Connect DC plug to monitor and the other side to wall outlet
Loading...