Xena Networks ValkyrieBay Quick Start Manual

Quick Start Guide

ValkyrieCompact & ValkyrieBay chassis

This guide shows you how to:

1. Install the latest software

2. Connect to the chassis

3. Change the chassis IP address

4. Update firmware

5. Recover the IP address

6. Recover the chassis password

Two RJ-45 ports for connection to the chassis. Full remote
device configuration and test setup via ValkyrieManager
or TCP/IP based scripting.

Yellow LED = HD activity
Green LED = Power
Re-set button
Power-On switch

Removable logo front­plate covering VGA port,
keyboard and mouse

ValkyrieCompact

A 1U unit that can be equipped with one test module. A robust flightcase is available for secure transportation.

Main chassis features

Red LED = HD activity
Green LED = Power
Re-set button
Power-On switch

VGA Port

ValkyrieBay

A 4U chassis with 12 slots for up to 12 test modules (some test modules occupy 2 slots).
Functionally 100% identical to the ValkyrieCompact testers.

Two RJ-45 ports for connection to
the chassis for full remote device
configuration and test setup via
ValkyrieManager or TCP/IP based scripting
(Mgmt on top, Ext on bottom), and
USB ports for keyboard/mouse