XENA XX15, XX14 User Manual

USER MANUAL for

XX14

Alarmed Disc-Locks

www.xenasecurity.com

PJ0801-1001-1221LRCopyright © MGX Asia Ltd. All rights reserved

*For more product details, please check with your local XENA dealer or visit
www.xenasecurity.com

1 2

Fitting XENA to your motorcycle’s brake disc

1. Thickness of brake-disc: Standard issue on virtually all
motorcycle models at just under 7mm (1/4”)

2. Locking-pin size: 14mm (1/2”).

3. Distance from locking-pin to back of disc-slot*:

Area for
locking pin

Parts of XX14 Alarmed Disc-Lo ck

1. Battery pack

2. Lock barrel

3. Locking pin

The Lock ing System

• Insert key and rotate clockwise. Lock barrel will spring open.

• Place on motorcycle’s brake disc.

• Locate gap in brake disc that will allow locking pin to pass through.

• Push lock barrel down to insert locking pin until it clicks shut.

For more information on tting XENA to your bike,
go to www.xenasecurity.com/faqs.

41mm (1 1 5/8”)

*Note that the locking pin can pass through ANY hole on
the brake disc (see dark area on diagram).

4. Reector

5. Alarm module

6. Screw

A

7. Lid

8. Release pin

ENGLISH

ENGLISH

The Alarm System

• Your XENA alarmed disc-lock is self-arming. It will activate within approximately 5

seconds of being locked onto your brake disc.

• There is no on-o switch. The unit automatically senses the presence of your

brake disc.

• Once in place, the alarm will beep once to conrm that it is armed.

• Once armed, shock & motion sensors work independently to determine if your
bike is being tampered with.

• Once triggered, the unit will emit ve countdown beeps, and alarm will sound for

10-15 seconds.

• If attack continues, the alarm will continue. If attack stops, the unit will re-set itself.

Replac ing the Batteries

• Locate spring-loaded pin inside double-locking port on underside of lock; push in
to release and remove module cover (Note: the release pin is hidden and totally
inaccessible when unit is locked on a brake disc).

• Using hexagonal key provided, unscrew retaining screw and remove alarm module.

• Replace batteries. The unit will emit one beep to conrm that the battery pack

has been installed correctly.

• Screw module back in place and replace cover plate.

• Use XBP-4 battery pack, available from all authorised XENA dealers, or 6 x LR44

button-cell generic batteries.

B

3 4

ENGLISH

Battery Life

• Under normal use, batteries should last 8 months. Frequent triggering, or extreme

temperatures can adversely aect battery life.

• Constant ticking or noticeable deterioration in alarm sound quality indicate that
batteries are low.

• Low batteries aect performance. Replace batteries at rst sign of low power.

Keys

• Each lock comes with three keys and a key tag with serial number (ie, X123456).
Use this unique identication number to order more keys for your lock; the key
tag should be stored separately; to order additional keys XENA requires the keytag
along with owner details (including name, address and telephone number) and a
receipt for the purchase of the lock. Keys will only be sent to the owner’s address.

Caring for Your Lock

• Use a dry cloth to keep the LED reector plate inside the disc-slot clean and free

of dirt, dust, grease and grime. An obstructed reector plate can adversely aect
performance.

If Alarm M odule Becomes Damage d

• Note: The self-contained alarm module can be replaced with a new unit from

your local authorised XENA dealer.

ENGLISH

• Note: the lock will continue to function as an eective anti-theft device, with or
without the alarm system.

Taking Your XENA with You

• Ideally, carry your XENA underneath the seat of your bike.

• CAUTION: Do not carry your XENA in or attach it to your clothing, as this can

cause serious personal injury in the event of an accident.

Troubleshooting

Alarm not arming: Move to dierent location on disc or replace batteries.
Lock making constant clicking or beeping sound, replace batteries.

Alarm too sensitive: Place at 6 o’clock on disk.
Alarm not sensitive enough: Place at 12 o’clock to 3 o’clock on disc.
Alarm doesn’t disarm: Clean sensor and reector.

FOR CUSTOM ER CARE

Email us at: [e-mail]

DISCLAIMER:

XENA SECURITY ASSUMES NO RESPONSIBILITY OR LIABILITY FOR DAMAGES OR
INJURIES RESULTING FROM THE MISUSE OF OUR PRODUCTS.

5