XENA XX15, XX14 User Manual

USER MANUAL for

XX14

Alarmed Disc-Locks

www.xenasecurity.com

PJ0801-1001-1221LRCopyright © MGX Asia Ltd. All rights reserved

*For more product details, please check with your local XENA dealer or visit
www.xenasecurity.com

1 2

Fitting XENA to your motorcycle’s brake disc

1. Thickness of brake-disc: Standard issue on virtually all
motorcycle models at just under 7mm (1/4”)

2. Locking-pin size: 14mm (1/2”).

3. Distance from locking-pin to back of disc-slot*:

Area for
locking pin

Parts of XX14 Alarmed Disc-Lo ck

1. Battery pack

2. Lock barrel

3. Locking pin

The Lock ing System

• Insert key and rotate clockwise. Lock barrel will spring open.

• Place on motorcycle’s brake disc.

• Locate gap in brake disc that will allow locking pin to pass through.

• Push lock barrel down to insert locking pin until it clicks shut.

For more information on tting XENA to your bike,
go to www.xenasecurity.com/faqs.

41mm (1 1 5/8”)

*Note that the locking pin can pass through ANY hole on
the brake disc (see dark area on diagram).

4. Reector

5. Alarm module

6. Screw

A

7. Lid

8. Release pin

ENGLISH