XEMOD XD010-22S Datasheet

XEMOD RESERVES THE RIGHT TO MAKE CHANGES TO THIS SPECIFICATION WITHOUT FURTHER NOTICE. BEFORE THE
PRODUCT DESCRIBED HERE IS WRITTEN INTO SPECIFICATIONS OR USED IN CRITICAL APPLICATIONS, THE PERFORMANCE
CHARACTERISTICS SHOULD BE VERIFIED BY CONTACTING XEMOD.

Xemod QuikPAC Data www.xemod.com Rev. 3 (10-08-02) Page 1 of 2
XD010-22S

XD010-22S

Advanced 10W, 1805-1880MHz
QuikPAC Module Data GSM/EDGE Driver Amplifier

General description:

The XD010-22S QuikPAC™ 10W power module is a 2-stage Class
A/AB amplifier module for use in the driver stages of GSM/EDGE RF
power amplifiers for cellular base stations. The power transistors are
fabricated using Xemod’s latest, high performance LDMOS process.
This unit operates from a single voltage and has internal
temperature compensation of the bias voltage to ensure stable
performance over the full temperature range.

Features:

Single Voltage Operation
High Gain
High Efficiency
Advanced, XeMOS II LDMOS FETS
Stable Performance
50 Ω RF impedance
QuikPAC System Compatible

Standard Operating Conditions

Parameter Symbol Min Nom Max Units

Frequency Range

F

1805 1880 MHz

Supply (Drain) Voltage

VD

28 VDC

Input and Output Impedance

Ω

50 Ohms

Load Impedance for Stable Operation (All Phases)

VSWR

10:1

Base Plate Temperature T

OP

-20 +90 ºC

Maximum Ratings

Parameter

Symbol Value Units

Supply (Drain) Voltage VDD 35 VDC
Input RF Power PIN +20 dBm
Load Impedance for continuous operation without damage VSWR 5/1
Output Device Channel Temperature 200 ºC
Lead Temperature during reflow soldering +210 ºC
Storage Temperature T

STG

-40 to +100 ºC

Performance at 25ºC

Parameter Symbol Min Nom Max Units

Supply Voltage

V

D1,2

27.8 28.0 28.2 VDC

Power Output at 1 dB Compression (single tone)

P-1

9.0 11.0 W

Gain at 2W Output (CW)

G

27 28.5 30 dB

Gain Flatness over frequency at 2W Output (CW)

∆G

0.2 0.5 dB

Input Return Loss at 2W Output (CW) (50 Ω Ref)

iRL

14 20 dB

Quiescent Current (total)

IDQ

380 mA

Drain Efficiency at 12W CW output

ηD

25 %

RMS EVM at 2W EDGE output

2.5 %

Peak EVM at 2W EDGE output

6.7 %

3rd order IMD at 12W PEP (two- tone; 1MHz ∆F)

-32 -27 dBc

Electrical Delay

2.5 ns

Transmission Phase Flatness

0.5 deg.

Xemod QuikPAC Data www.xemod.com Rev. 3 (10-08-02) Page 2 of 2
XD010-22S

Performance Over Temperature

Parameter Symbol Min Nom Max Units

Power Output at 1 dB Compression (single tone)

P-1

9 W

Gain at 2W Output (CW)

G

27.0 dB

Gain Flatness over frequency at 2W Output (CW)

∆G

0.2 0.5 dB

Input Return Loss at 2W Output (CW) (50 Ω Ref)

iRL

14 dB

Drain Efficiency at 12W CW output

ηD

25 %

RMS EVM at 2W EDGE output

ηD

2.5 %

Notes:

The "Preliminary" designation on this data sheet indicates this product has not yet entered production. The data supplied
here is derived from engineering development and pilot production testing and may change.

The internal generated gate voltage is thermally compensated to maintain constant quiescent current over the temperature
range listed in the data sheet. No compensation is provided for gain changes with temperature. This can only be provided
with AGC external to the module

Internal RF decoupling is included on all bias leads. No additional bypass elements are required, however some
applications may require energy storage on the drain leads to accommodate time-varying waveforms.

The RF leads are internally protected against DC voltages up to 100V. Care should be taken to avoid video transients that
may damage the active devices.

Package Styles

This model is available in the D2F (H12048) package style.
Please see the applicable outline drawing for detailed dimensions.

Style D2F