Xeline Xup XM100-01-U User Manual

Xup XM100-01-U
User’s Manual
Guide on User ’s Manual
Copyright 2001 by Xeline Co., Ltd. All Rights Reserved.
No part of this publication may be reproduced, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without prior written permission from Xeline Co., Ltd.
Please be aware that the product would be upgraded to enhance the features and performance without any prior notice. There could be slight difference on actual installation and operation of product from this User’s manual.
Should you have any questions or comments on this User’s manual, please communicate through “Contact us ” menu at our web site www.xeline.com.
Technical Support Center Address:7F. Chungjin B/D., 475-22, Bangbae 2-dong, Seocho-ku, Seoul, Korea Telephone: 822) 598-0980 Web Site: http://www.xeline.com
Trademarks
Xup XM100-01-U is a registered trademark of Xeline Co., Ltd. Widows98/Windows N/T is a registered trademark of Microsoft Corporation. MS-Windows is a registered trademark of Microsoft Corporation.
General Notice: Other brand and product names used herein are for identification purposes
only and may be trademarks of their respective owners.
Contents
1. Product Introduction ………………………………………… 4
1.1 Product Characteristics …………………………………………… 4
1.2 Product Contents …………………………………………………… 4
1.3 Product Details …………………………………………………… 5
Product Outfit ……………………………………… …………… 5 Specifications ………………………………………………… ………… 6
2. Installation Guide …………………………………………………… 7
2.1 Installation …………………………………………………… ……… 7
Set up Xup XM100-01-U ……………………………… 7 Installation of Xup XM100-01-U Driver ……………………………………… 8 TCP/IP setting ………………………..…… 11
3. Useful Notes ……………………………………………………… 15
3.1 Useful notes ……………………………………………………… 15
Cautions ……………………………………………………… 15 Troubleshooting ……………………………………………………… 16 Warranty ……………………………………………………… 16
1. Product Introduction
1.1 Product Characteristics
Xup XM100-01-U is enabling the data transmission over powerline. As powerline communications technology offers network by utilizing existing power lines at home or small office, therefore no additional cost is incurred for additional wiring. Xup brings networking solution with ease of installation and no special networking configuration work. It adds more convenience for PC with USB Interface as it does not require set up of LAN CARD.
1.2 Product Contents
Xup XM100-01-U
Power Cable USB Cable
User’s Manual Driver Installation Diskette
1.3 Product Details  Product Outfit
Front
 PWR Turned on when power is connected and power switch is on.  ACT Blinks when communication is in normal operation.  STA Turned on when power is connected, and initialization is properly completed.  LNK Turned on when connection to PC is properly done.
Rear
 Power Inlet Connection point to connect power cable.  Power switch To turn on/off the Xup.  USB Interface Interface between PC and Xup for communication.  Performance Selection DIP Switch
DIP Switch Configuration
Loading...
+ 11 hidden pages