READ AND FOLLOW ALL
SAFETY INSTRUCTIONS
SAVE THIS GUIDE FOR FUTURE
REFERENCE
WARNING!
Risk of Electric Shock. Turn power
off before installation or servicing.
Zephyr Gen2 Series
LED Area Light Fixture
Installation Guide
General Product Information
The Zephyr G2 Series of IP67 rated LED luminaires are
designed for pole mounting in outdoor open areas.
Their high energy efficiency and sleek appearance
make them an elegant replacement for traditional
shoebox lighting.
Unpacking
This fixture has been packed carefully with the intent to
prevent damage from occurring during shipment.
Inspect the contents to confirm.
Fixture Specifications
Input 100-277VAC. Max Dimensions (28x16x4.5)in. Max
Weight: 25lbs (Fixture), 29lbs (Packaged). IP67. ETL listed.
IMPORTANT ADVISORIES AND SAFEGUARDS
1) Suitable for Installation in wet locations (IP67 rated)
2) Follow all standards specified by the NEC for installation. Consult a local licensed
electrician or electrical contractor if you are unsure.
3) When using electrical equipment, basic safety precautions should always be followed.
Items such as gloves and protective eyewear are recommended.
4) DO NOT lift the fixture by its wires.
5) Always ensure the fixture is secure when mounted, temporarily or permanently, at any
height above ground.
6) These instructions do not purport to cover all details or variations in equipment nor to
provide every possible contingency to meet in connection with installation, operation,
or maintenance.
www.xeleum.com
Page 1 of 10Xeleum Lighting, LLC. 3430 Quantum Blvd. Boynton Beach, FL 33426 * Phone 954 617 8170 * Fax 954 571 9777 * www.xeleum.com
Mounting Component Options
Installation Steps
Tenon Mounting
Step 1
Connect the bracket
to the pole
Square Pole Mounting
Step 1
Drill holes and utilize the internal
and external brackets to fix the
mount to the pole
Step 2
Align the fixture with the
bracket and drop it on
Step 2
Align the fixture with the
bracket mount.
Step 3
Tighten and secure all
screws
Step 3
Tighten and secure all
screws.
Xeleum Lighting, LLC www.xeleum.com PL-015-WSB-112 Page 2
Installation Steps
Round Pole Mounting
Step 1
Drill holes and utilize the internal
and external brackets to fix the
mount to the pole
Step 2
Align the fixture with the
bracket and drop it on
Additional Features for Installation
40mm Adapter
Step 3
Tighten and secure all
screws
An additional adapter can be used on
40mm diameter poles. Having the
adapter is convenient for smaller
poles and can reduce inventory.
Bubble Level
The base comes equipped with a
bubble level that will allow the installer
to easily determine whether the fixture
is tilted or not. If so, loosen screws and
adjust the position accordingly until the
buble is centered between the two
black markers.
Xeleum Lighting, LLC www.xeleum.com PL-015-WSB-112 Page 3
Loading...