XECOM PC1414SR Datasheet

xecom

PC1414SR

Description

The PC1414SR combines a 14,400 bps data
modem providing error control and data
compression with a 14,400 bps Group 3 send­and-receive fax modem on a standard PC/104
stack-through module. The PC1414SR
includes FCC Part 68 registration permitting
it to be connected directly to the telephone
network.

The PC1414SR uses the industry standard
Hayes "AT" command set for control and
configuration. This insures compatibility
with virtually all software drivers and
applications software designed for modem
communications. Fax configuration is via
Class 1 and Class 2 AT Fax commands.

Xecom brings 10 years of modem expertise to
the PC/104 market. In addition to the
PC1414SR, Xecom offers a complete line of
Fax and Data modems for PC/104 sockets.

PC1414SR Features

• Full compatibility with Hayes “AT” modem
control and configuration commands. Class
1 and Class 2 AT fax commands are used
for fax control.

• Small Size 3.6” x 3.8” x 0.6”

• FCC Part 68 Registered, for direct
connection to the telephone line;

• 14,400bps data transfer with fallback rates
of 12000, 9600, 7200, 4800, 2400, 1200&
300bps;

• 14,400bps Group 3 fax with fallback rates
of 12000, 9600, 7200, 4800&2400bps;

• CMOSdesign includes low power Auto
standby mode;

• Error control and data compression
provided with MNP classes 2-5, V.42 and
V.42bis

XECOM, INC. • 374 Turquoise Street, Milpitas, Ca. 95035 • Phone [phone] • Fax [phone]

xecom

SPECIFICATIONS

PC1414SR

10-26-93

ELECTRICAL

• Data Rates: 300, 1200,
2400, 4800, 7200, 9600,
12,000, and 14,400 bits
per second;

• Modem Standards: Bell
103 and 212, CCITT
V.17, V.21, V.22,
V.22bis, V.27ter, V.29,
V.32 and V.32bis;

• Group 3 Fax Rates:
14,400, 12,000, 9600,
7200, 4800 and 2400 bits
per second;

• Data Transmit Level:

-10 +1 dBm;

• Receive Sensitivity:

-10 to -45 dBm

• Power Requirements:
5 Volts +5%, maximum
current 150 milliamps;
Sleep Mode current 6
milliamps;

SYSTEM INTERFACE

• Modem configuration
and control using Hayes
"AT" Command set;

• Fax configuration and
control using Class 1 and
Class 2 "AT" Fax
Commands;

• I/O Addresses:
(selected by jumpers)
3F8h (COM1), 2F8h
(COM2), 3E8h (COM3),
and 2E8h (COM4);

• Interupts:
(selected by jumpers)
IRQ2, IRQ3, IRQ4, or
IRQ7;

MECHANICAL

• Size:
Length 3.6 in. (90 mm)
Width 3.8 in. (96mm)
Height 0.6 in (15mm)
[Add .3 inches (8 mm) for
stackthrough pins.]

• Weight: 3.5 oz. (100 gm)

ENVIRONMENTAL

• Operating Conditions:
Temperature - 0oto 70oC
Relative Humidity - 5%
to 95% non-condensing

• Storage Temperature -

-25oto 85oC

• Contact Xecom for
information regarding
extended temperature
ranges;

• FCC Part 68 Registered

XECOM, INC. • 374 Turquoise Street, Milpitas, Ca. 95035 • Phone [phone] • Fax [phone]

ORDERING INFORMTION

When ordering, please refer to the following model numbers.

* PC1414SR - 14,400 bps modem with MNP Classes 2-5, V.42,

V.42bis,14,400 bps Group 3 Fax, stackthrough bus

* PC/104CR - RJ11 phone line adapter cable