Xdream XM11001 User Manual

MODEL NO: XM11001
DATE CODE: 0613

TM

X-Cell Plus Power Bank with
Speaker Stand.

X-Cell Plus is your new source of

BC

mobile energy. Acting as both a 3000
mAh power bank and a speaker
stand, X-Cell fuels your mobile
entertainment with clear, crisp sound
while charging your device.

Share your experience with

Battery Life Extension

IPHONE 3
IPHONE 4/4(S)
IPHONE 5
IPOD TOUCH
IPOD NANO
SAMSUNG GALAXY S III
BLACKBERRY BOLD

≥140%
≥120%
≥120%
≥180%
≥165%
≥80%
≥140%

ease.

Compatible with

X-Cell Plus brings new life to your
mobile media. Featuring high
quality, full frequency speakers, you
can now share superior sound on
the go without the bulk.
X-Cell Plus keeps your device at a

MOBILE

MP3 GAMING GPS CAMERAS

PHONES

devices automatically

Functions as a stand for easy
viewing and operating of your device

Compatible with most cell phones
with 3.5mm audio jack and USB
charging cable

Components of X-Cell Plus

1. Power Indicator

2. Battery Indicator

3. Full Frequency Speaker

4. Locating Shaft

5. USB Power Port

6. 3.5 mm Audio Plug

7. Sound Box Pilot Hole

<Fig.1>

seamless tilted viewing angle,
making it perfect for playing music
or a movie with friends as it charges
your mobile device. Just plug in your
phone or media player into the
pull-out 3.5mm jack and let X-Cell
Plus broadcast your sound to the
world.

Features

Portable external battery for mobile
devices

3000mAh high capacity Samsung
battery

High quality & full frequency speaker

Smart Switch technology switches on
and off by detecting audio signal and

Accessories

USB to USB/DC output cable x 1

30 PIN x 1

iPhone 3
iPhone 4/4s
iPod
iPod nano
iPod Touch
iPod Shuffle

Micro USB x 1

HTC HD7
HTC One X
LG Optimus
Blackberry Bold
Blackberry Curve
Motorola Droid
Samsung Galaxy S3
Sony Xperia S LT26i
Sony Ericsson Xperia X10

Mini USB x 1

HTC Droid Eris CDMA
Nintendo Dsi
Motorola Sidekick
Motorola Q
Motorola Sliver
Motorola Razr V3
Blackberry 62xx
Blackberry 7100
Blackberry 8100
Blackberry 8320
Blackberry 8800

Demonstration

Step 1 Step 2

Pouch x 1

TM

Getting Started

First charge your X-Cell Plus to its full
capacity. This may take up to 6 hrs.

To Charge X-Cell Plus

X-Cell Plus does not have a dedicated
adapter and you can use any adapter
with a USB interface such as the
adapters of iPhone, iPod, iPad or
Nokia, etc. <Fig.2>

To charge X-Cell Plus pull out and
rotate locating shaft in counter
clockwise direction to parallel
position and plug either USB end of
supplied cable into the X-Cell Plus.
Plug the other USB end into a USB 5V
wall adapter or through the USB jack
of your computer.<Fig.2 & Fig.3>

Please note X-Cell Plus does not come
with a dedicated adapter. You may use
any 5V USB interface adapter such as
the adapters of iPhone, iPod, iPad,
Nokia,etc.<Fig. 2>

When the charging process is started,
the indicator lights will flicker one by
one in the direction of the arrow. <Fig.9>

When all indicator lights are lit,
charging is complete.

The maximum input voltage of
X-Cell Plus is 5V, please read the
specification manual instruction of
the adaptor you will use.

<Fig.2>

<Fig.3>

To Charge Personal Electronic
Devices

Pull out and rotate the locating shaft in
counter clockwise direction to parallel
position and insert either USB end of
supplied cable into X-Cell Plus. <Fig.4>

Insert the provided appropriate tip for
your device to the supplied cable and
connect to your device. <Fig.5>

X-Cell Plus will automatically recognize
your device and begin charging within
seconds. The indicator lights will flicker
one by one in the direction of the arrow.
<Fig.9>

You may also use the dedicated USB
cable that was supplied with your
device.

You may simultaneously charge your
device and the X-Cell Plus by first
plugging other USB end into power
source before connecting your device.
In this case, the indicator lights will
remain in the direction indicating
X-Cell Plus charging <Fig.9> However,
your device’s charging indicator will
be on.

The X-Cell Plus will automatically
turn itself off in when disconnected
from your device.
Please note, when the battery of
X-Cell Plus reaches low level, X-Cell
Plus will automatically turn off to
protect its battery life.

<Fig.4>

<Fig.5>

To Play Music/Audio

When fully charged, your X-Cell Plus
has the capacity for up to fifteen hours
of music play depending upon your
device. Enjoy sharing your favorite
music and videos with your friends &

family anywhere you go.

Pull out and rotate the locating shaft
in a counter clockwise direction to
parallel position.<Fig.6>

Insert the 3.5mm plug into the
headphone jack of your device. Your
X-Cell Plus will function as a stand for
your device when in this position
making viewing and operation easy.
<Fig.7>

Make sure the volume on your device
is turned up to at least 90%.

Press the Play button on your device.
X-Cell plus will automatically
recognize the audio signal and begin
playing in approx 10-15 seconds.

Please make sure you wait a full 10-15
seconds for your X-Cell Plus to begin
playing. Once audio begins playing, you
may adjust the volume on your
device.

If volume is turned down too low,
audio signal cannot be detected
and X-Cell Plus may stop playing.
If this happens, simply turn volume
back to 90% and hit play again.

To conserve power, your X-Cell
Plus will automatically shut down
in approx 60 seconds when audio
play is stopped.
Audio Play can only function if your
device is equipped with a 3.5mm
headphone jack.
It is possible for slight distortion or
buzz to occur when receiving a
phone call or message during
audio play. This will vanish in a few
seconds.
Some device cases are too thick for
proper connection of audio plug
causing static, distortion, sporadic,
improper or lack of play. In this
case, please remove your case
before plugging in device.
Touching the audio plug when
X-Cell Plus is connected to device
or power source will cause static
due to electromagnetic distortion.
You may also simultaneously
charge your device and play audio
by plugging the USB end of
supplied cable into X-Cell Plus and
inserting cable with appropriate tip
into your device as specified in the
“To Charge Personal Electronics

Section” of this manual. Please
note this will significantly reduce
the amount of audio play time as
battery is being used for dual
function.
If you wish to charge your X-Cell
Plus while simultaneously playing
music/charging your device,
simply connect the other USB end
to a power source as specified in
the “To Charge X-Cell Plus section
of this manual”.
When finished using X-Cell Plus,
replace locating shaft by pulling
up and turning in clockwise
direction until shaft is over
soundbox pilot hole<Fig.8>

<Fig.6>

<Fig.7>

<Fig.8>

Power & Capacity Indicator

0~33% capacity of battery charged
33~66% capacity of battery charged
66~100% fully charged

<Fig.9>

Charging other device with Charging X-Cell Plus

Your X-Cell Plus is equipped with
intelligent software that allows it to
automatically recognize devices
and turn itself on and off.
Therefore, no ON/OFF switch is
needed. Whenever the X-Cell Plus
is disconnected from a device or
power source, the battery indicator
lights will display the amount of
battery remaining before turning
itself off. To view the battery status

Charging X-Cell Plus

at any time, simply connect the
X-Cell Plus to your device or power
source and then disconnect.

Technical Data

Product Dimensions:
Product Weight:

1.2 x 1.2 x 5.2 inches

0.441 lbs

Please select the adapter whose
input voltage matches X-Cell Plus’s
to charge.
X-Cell Plus does not charge the
product whose output voltage is
higher than it.

Trouble Shooting

No Sound

It takes 10-15 seconds for the X-Cell
Plus to recognize the audio signal and
begin playing. Please make sure you
are waiting the full 10-15 seconds.

Check that the source device is turned
on and playing music.

Check that volume level of source
device is at 90% or more.

Check that the audio plug is correctly
and tightly plugged in the audio output
port of the source device. If your
source device’s protective case is too
thick, it may cause improper
connection of audio plug causing
inability to play audio. Remove the
shell for use.

Check power level of source device.
Recharge if necessary.

Check power level of X-Cell Plus.

Recharge or plug into power source if
necessary.

Distorted/Inconsistent Sound

X-Cell Plus is running out of battery.

Recharge X-Cell Plus to full before
use.

Source volume is too loud. Turn down
the volume of the source device to the
point where the sound is no longer
distorted.

Check that the audio plug is correctly
and tightly plugged in the audio output
port of the source device. If your
source device’s protective case is too
thick, it may cause improper
connection of audio plug causing
inability to play audio. Remove the
shell for use.

Distortion occurs while playing audio
and charging your device. Unplug
charging cable.

You may experience a buzzing or

static sound during audio play when
receiving phone call or message. This
will go away in a few seconds.

Music Suddenly Stopped

If the audio signal is too weak, it can’t
be detected by X-Cell Plus. Please
turn up the volume on your source
device. Press play if necessary.

Please note, it may be necessary to
unplug and reinsert audio plug into
source device.

If it still does not play, check the
battery of X-Cell Plus.

Can’t Charge Other Devices

X-Cell Plus is running out of battery.
Recharge X-Cell Plus to full before
use.

USB needs to be reseated. Reseat the
USB cable and wait for a few seconds.
Check the source device’s input
requirements, if the device’s
requirements for input current and
input voltage are higher than X-Cell
Plus’s, X-Cell Plus can’t charge this
device. Please refer to the manual
instruction of your device.

Locating Shaft Makes Noise When
Rotated

Add small amount of oil/lube to both
ends of the shaft.

Battery Efficiency Reduced

When out of service for a long period,
it is recommended to retain 30% of
power and charge the X-Cell Plus
every 2 months.

Warnings

Read all safety information below
and operating instructions before
using X-Cell plus to avoid possible
injury and damage to your device.
We assume no responsibility for
damage to charged devices due to
improper operation of this product.
Failure to follow these safety
instructions could result in fire,
electric shock, or other injury or
damage.

Caution

The lithium-ion rechargeable
battery used in this device may
present a risk of fire or chemical

burn if mistreated. Do not
disassemble, expose to heat above
212°F(100°C), or incinerate.
Misusing or incorrectly connecting
this device may cause electric shock
to users and damage equipment.

When used correctly, lithium-ion
rechargeable batteries provide a
safe and dependable source of
portable power. However, if they are
misused or abused, this may result
in leakage, burns, fire or
explosion/disassembly, causing
personal injury or damage to other
devices.

Do not expose X-Cell Plus to
high-temperature environments,
including direct sunlight and fire.

Do not drop or subject X-Cell Plus to
strong impacts. Do not operate
X-Cell Plus if it has received a sharp
blow, been dropped or damaged in
anyway.

Do not expose X-Cell Plus to

moisture, water, rain, snow, or spray.

Only use the supplied USB cable to

charge your X-Cell Plus. Follow
specified method for charging.

X-Cell Plus will experience a rise in
temperature while in operation. Please
make sure your device is exposed to
air. Do not cover X-Cell Plus with any
item while it is operating.

If X-Cell plus is overheating, swelling
or moisturizing while in use, or there
are any abnormal conditions, please
stop using it immediately.

Never attempt to repair or modify this
power charger by yourself.

Disassembling this power charger,
including the removal of external
screws, may cause damage that is not
covered under the warranty. Incorrect
reassembly may result in shock or fire
hazard. If this power charger has been
submerged in water, punctured, or
subjected to a severe fall, do not use it.
Never force a connector into a port;
check for obstructions in the port, If
the connector and port do not join
with reasonable ease, they probably
do not match. Make sure that the
connector matches the port and that

you have positioned the connector
correctly in relation to the port.

In the unlikely event of leakage or
explosion, use sand or chemical fire
extinguisher.

It is recommended to fully charge
the battery before your first use in
order to extend its standby time.

Never charge device unattended.

Children or the elderly should use
the product under supervision.

Product Maintenance

When out of service for a long period,
it is recommended to retain 30% of
power and charge the X-Cell Plus
every two months.

FCC Compliance Statement

This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions:

(1) This device may not cause
harmful interference,and
(2) This device must accept any
interference received, including
interference that may cause
undesired operation.

15.21
You are cautioned that changes or

modifications not expessly approved
by the party responsible for
compliance could void the user’s
authority to operate the equipment.

15.105(b)
This equipment has been tested and

found to comply with the limits for
Class B digital devices, pursuant to
Part 15 of the FCC rules. These
limits are designed to provide
reasonable protection against
harmful interference in a residential
installation. This equipment
generates, uses, and can radiate

radio frequency energy and, if not
installed and used in accordance with
the instructions, may cause harmful
interference to radio
communications.

Please contact the local recycling
facility for removal of the battery. The
embedded, non replaceable battery
is designed to last the lifetime of the
product.

However, there is no guarantee that
interference will not occur in a
particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to
correct the interference by one or
more of the following measures:

Reorient or relocate the receiving
antenna.
Increase the separation between
the equipment and receiver.
Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.

Consult the dealer or an
experienced radio/TV technician
for help.

DO NOT dispose of unit
with general waste.
Contains lithium polymer
battery. Please return it to
battery recycling collection
center. For recycling
center near you, call
1-877-2-RECYCLE.

LIMITED MANUFACTURER’S
WARRANTY

X-Dream warrants its products to be
free from defects in material and
workmanship under normal use and
conditions, as follows:

During the first ninety (90) days
from date of purchase, X-Dream
will repair or replace the defective
product.
X-Dream will, subject to inspection,
repair the defective product or
replace it with a new or
reconditioned unit at its sole
discretion.
Warranty returns must be shipped
prepaid. A shipping rebate will be
extended to the customer only in
the event that a defect in material
or workmanship is confirmed.
Warranty is void if the product has
been improperly handled or
misused in any way, or if the label
and/or bar coded warranty label
has been removed or tampered
with.
Warranty returns require a check

for $16.95 for processing and
handling made payable to DBOD
Marketing, LLC.
Where applicable, all requests for
warranty returns must be
accompanied by a proof of
purchase and be made to DBOD
Marketing, LLC.
This warranty does not extend to
the electronic equipment that is
used or which incorporates with
any of our products and
accessories. X-Dream/DBOD
Marketing, LLC shall not be held
responsible for the improper use of
its products.
Warranty returns should be
addressed to:
X-Dream c/o DBOD Marketing/ LLC
125 St Andrews
Smithfield, VA 23430
To contact us [phone]

Made in China
Manufacturer: Famous Works
Electronics (Shanghai) Co., Ltd.
Distributed by DBOD Marketing, LLC
authorized distributor of XDREAM

TM

TM

www.goxdream.com