Xcruiser XDSR57FTA User Manual
1
www.xcruiser.net
XDSR57FTA
User’s Manual
XDSR57FTA
Free-to-Air
Digital Satellite Receiver
Please read this User’s Manual carefully before installing the receiver.
2
www.xcruiser.net
XDSR57FTA
SAFETY INSTRUCTIONS 3
SYMBOLS USED ON THE RECEIVER
GENERAL INFORMATION
MainFeatures
Unpacking
General Operation of STB
OVERVIEW OF THE EQUIPMENT
1. Front Panel
2. Rear Panel
3. Remote Control Unit
INSTALLATION OF STB
First Steps
Menu Information
Table of Contents
Menu Operation
1. Channel
1.1 TV Channel
1.2 Add Channel
2. lnstallation
2.1 Auto Scan
2.2 Add Satellite
3
4
5
6
6
5
5
6
7
8
8
8
8
9
9
11
12
12
12
2.3 Edit Satellite 12
2.4 Delete Satellite
3. System
3.1 Language
3.2 TV Syetem
3.3 Auto Shut Down
3.4 OSD Setting
3.5 Parent Lock
4. Tools
4.1 lnformation
4.2 Satellite Guide
4.3 Default Value
4.4 Software Uparade
TECHNICAL SPECIFICATION
TROUBLE SHOOTING
12
13
13
13
13
13
13
14
14
14
14
14
15
16
3
www.xcruiser.net
XDSR57FTA
Please read these safety instructions through carefully, before
operating the receiver.
Please observe all warnings and instructions on the equipment
and contained in these operating instructions.
Be sure to read this usre’s manual before starting your operation
You must install the dish with correct direction and angle. lf the
receiver antenna is not working properly, contact your local
dealer
Never open the cover. It is very dangerous to touch the inside
of the unit due to possible electric shock.
Install the unit horizontally. Unbalanced installation may cause
the unit to be damaged by itself.
When you don’t use this unit for a long time please pull the
power cord from the outlet. Also do not use damaged power
cord.
when the unit is suddenly moved to a hot area from a cold area,
it may cause problems. In that case, turn off the power, and turn
Safety Instructions
on after 1-2 hours.
Do not touch the power with wet hand. If there is liquid flowing
into the unit, pull out the power cord immediately because it
cause fire or electric shock.
May install the unit in a place with: good ventilation, suitable
temperature, no direct sunrays, low humidity low vibration
influence.
Place the unit in a well ventilated and no heat environment.
Do not put heavy objects on the unit.
The next paragraphs explain the meaning of the symbols,
present on the receiver.
The caution risk of electrical shock / Do not open symbol
This symbol tell you that you are not allowed to open the receiver.
Only authorized servive technicians are allowed to open the box.
The Lightning Flash with arrowhead symbol within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product enclosure that may be of
sufficient magnitude to constitute a risk of shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the
product.
The Digital Video Broadcasting logo
This logo tells you that this receiver is compliant with the DVB standards as registered under under registration number 2347.
The double insulation symbol
This symbol tells you that the receiver is electrically safe within the
normal use of the receiver as stated in the safety chapter.
Symbols Used on the Receiver
4
www.xcruiser.net
XDSR57FTA
Incorporating the powerful single chip decoder,
XDSR57FTA is designed to provide FTA (Free-To-Air)
channels with user-friendly OSD (On Screen Display).
This digital set Top box demonstrates extremely high
performance and cost-efectiveness, which makes it your
best choice to enjoy the colorful digital life at home.
Main Features
• Fully DVB-S/MPEG-2 compliant
• 1800 channels memory space (TV and Radio)
• SCPC & MCPC receivable from C/Ku band satellites
• 5 OSD Color Style
• 16/256 colors on screen display (OSD) supported
• PAL-NTSC auto-conversion
• DISEqC 1.0 supported
General Information
• Up to 9 Picture on screen
• Automatic channel search
• Software upgrade via RS-232 serial port
General Operation of STB
Throughout this manual you will notice that the everyday operation
of your STB is based on a series of user friendly on screen display
and menus. These menus will help you get the most from your STB,
guiding you through installation, channel organizing, viewing and
many other functions.
All functions can be carried out using the buttons on the Remote
control unit and some of the functions can be carried out using the
buttons on the Remote control unit.
Should you experience any difficulties with the operation of your
unit, please consult the relevant section of this manual. Including
the Problem Shooting, or alternatively call your dealer or a customer
service adviser.
NOTE:
Please be aware that new software may change the functionality of
the receiver. The photo and the function explanation involved in this
specification is for refernce only. If there is any mistake, please refer to
the entity.
Unpacking
Unpack the receiver and check to make sure that all of the tollowing
items are Included in the packaging.
1 x Remote Control Unit (Remote control unit)
1 x User’s Guide
1 x Digital Set Top Box
Front Panel
www.xcruiser.net
XDSR57FTA
5
Overview of the Equipment
1 2 3
STAND BY:
1
Press to switch between operation and standby modes.
CH+/CH-:
2
When watching, change to the previous or next channel
or move to the next highet or lower item in the menu.
SENSOR:
3
Receives IR signals from remote controller unit.
SIGNAL:
4
Turns Green when receives signals.
POWER INDICATOR:
5
Turns Red when Power is ON.
4 5
Front Panel Display
: Upload Procedure
: System Waiting
: Download Procedure
: Invalid Download Info
: Error in Data Transmitting
: System Start-up
Loading...