X-Core Technology XD2E5MR Operating Manual

OPERATING MANUAL

1/3” COLOR 3-AXIS VANDAL & WEATHER

RESISTANT V.F. IR DOME CAMERA WITH ICR

GENERAL DESCRIPTION

Thank you for choosing our Vari-focal Vandal Proof DSP color dome camera with a built in

3.7~12mm auto iris DC-drive lens, this camera can operate in any light condition including total

dark. It employs a SONY 1/3” EXview HAD II high resolution CCD sensor, utilizing advanced

SONY Enhanced Effio-E DSP technology to achieve up to 700 TV lines crisp image and stable

picture quality through day and night function.

CAUTION

1. Do not touch the surface of image sensor. If it is touched accidentally, it must be cleaned by cloth

moistened with alcohol.

2. Before operation, ensure that the supply voltage is correct as specified.

3. Avoid focusing on the sun directly.

4. Do not attempt to service this unit yourself unless you are authorized to do so. Opening or

removing cover may expose you to dangerous voltage or other hazards.

CONNECTOR

1. BNC Video Connector.

2. DC Power Connector.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

FEATURES

z Color dome camera with SONY 1/3” EXview HAD II high resolution CCD sensor.
z Employs SONY Enhanced Effio-E DSP chip-set for image control.
z Controlled by OSD (On Screen Display) menu in 8 languages (Option).
z Horizontal resolution of over 650TVL, Pixel number: NTSC=480K / PAL=570K.
z High sensitivity, low smear, high anti-blooming and high S/N ratio.
z Built-in functions: Auto Electronic Shutter (AES), Auto Gain Control (AGC), Auto Trace White Balance (ATW).
z Built-in Vari-Focal auto iris DC-Drive lens.
z OLPF auto switching (IR-Cut Removable).
z Built-in 11 units of high efficiency IR LED.
z CCD color image automatically changes into B/W image in low light environments.
z Furnished with DC power cable and video cable.
z Max. 10 pounds sledgehammer impact durability.
z Water resistant IP66 protection.
z 3-axis for wall or ceiling mounting with flexible lens rotation.
z Easy installation with attached cap.

NAME OF PARTS AND FUNCTIONS

INSTALLATION INSTRUCTIONS

(1) Connect the camera to a monitor with 75 ohm type coaxial cable.
(2) Connect the power cord to DC 12V power supply.
(3) Fix camera to the ceiling or wall by mounting device.

A. Lens
B. IR-LED
C. Side conduit entry
D. Back conduit entry

Dimensions Front View Bottom View

Top View

Bottom View

D

E

F
G

A

C

B

E. Inner plate mounting holes
F. BNC Connector
G. DC Connector