X-Core Technology XCH17WM Service Manual

SERVICE MANUAL

1/2.8” SONY COLOR CMOS OSD CAMERA

2.0 Mega Pixel Full HD Series

V.H1 7W M

The serial number of this product may be found
on the bottom of the unit.
You should note the serial number of this unit in
the space provided and retain this instruction as a
permanent record of your purchase to aid
identification in the event of theft.

Model No.
Serial No.

▲ Before attempting to connect this product, please read and keep this
manual for future use.

Safety W arning

1. Do not open the cover, it may cause electric shock. Ask a qualified

service person for maintenance when you encounter any problems.

2. Install the camera away from TV, radio transmitter, magnet, electric

motor, transformer, audio speaker s because the magnetic fields
generated from above devices will distort the video image.

3. Place the camera on a solid base. Install the camera away from

stoves or other heat generating devices as the high temperature could
cause deformation, discoloration or other damages to the camera.
Install the camera at where the temperature range does not exceed

-10°C to 50°C (14°F to 122°F)

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an
equilateral triangle, is interned to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.

①

4. Do not expose and operate the camera in the rain and humid areas.

5. Use only soft dry cloth to clean the camera. Also use lens tissue or

cotton tipped applicator and ethanol to clean the CMOS sensor and
camera lens.

6. When the camera is not in use, put the cover cap on the lens mount.

Please do not touch the surface of CMOS sensor by bare hand.

Introduction

This Full HD series camera introduces a new level of high picture quality
through the digital signal processing LSI’s technology for advanced video
surveillance. It provides the most reliable and accurate color picture in the
security industry.

Main Features

z Color camera with full HD resolution SONY 1/2.8” 2.0 Mega Pixel

Progressive Exmore CMOS image sensor.

z Resolution of 1920x1080p @ 30fps full high definition.
z Controlled by OSD (On Screen Display) menu in 4 languages.
z OLPF auto switching (IR-Cut Removable) for true day & night

performance.

z ACCE: Adaptive Color & Contrast Enhancement (D-WDR).
z Smart Noise Reduction: 3D-NR + Motion Detection.
z Selectable 2X~30X SENS-UP for starlight picture.
z LSC: Lens Shading Compensation.
z DPC: Dead Pixel Compensation.

②

Parts Names & Components

Hex Screwdriver

Auto Iris Plug

C-Mount Ring (Option)

Manual

Auto iris connector

③

1/2/8” SONY COLOR CMOS OSD CAMERA

2.0 Mega Pixel Full HD Series

Power LED Selection & setting buttons

Power Input Analog Video Output
HD-SDI Output

Hole to fix lens

Auto Iris Function

④

Plug in auto iris connector

Screw the auto ir is
lens on CS mount

DC DRIVE

Pin 1 (Red) Drive ▬
Pin 2 (N.C) Drive ╂
Pin 3 (White) Damp ╂
Pin 4 (Black) Damp ▬

Installation Instructions

(1) Remove the cap from the lens mount.
(2) Select the C mount lens (with mount ring) or CS mount lens.
(3) Screw and fasten the lens into the lens mount.
(4) Connect the HD-SDI output to the HD monitor with 75ohm type

coaxial cable.
(5) Connect the power cord input.
(6) When monitor shows the picture, please adjust the focus and iris of the

lens to obtain the best image according to the following procedures:

‧ Choose objects at a distance about 5 ~ 10 meter away.
‧ Loosen the mount lens fixing screw (use hex screwdriver), if

necessary.

‧ Turn the lens and the mount together until image is clear.
‧ Screw the mount to camera.

(7) Fix camera to the bracket, if necessary.

⑤

HD Monitor