Xcellon WTP-10, WTP-20 User manual
Windows Touch Pen
User Manual
Xcellon Windows Touch Pens
WTP-10
WTP-20
Thank you for choosing Xcellon.
The Xcellon Windows Touch Pen turns your computer monitor into a virtual touch
screen, so you can take advantage of the touch features built into the Windows
8 Start screen. The pen works with the included IR receiver that mounts to your
monitor’s bezel, allowing you to tap, swipe, drag, zoom, and more.
Designed for the Windows 8 Start screen, the pen is also compatible with the
Windows desktop on Windows XP, 7, and 8 operating systems. The WTP-10 kit is
designed for screen sizes 9ʺ to 17ʺ and the WPT-20 is designed for screen sizes 9ʺ
to 27ʺ.
2
Precautions
Please read and follow these instructions and keep this manual in a safe place.
Keep this product away from water and any flammable gases or liquids.
Clean this product with only a soft, dry cloth.
Keep this product away from children.
Use only parts provided by the manufacturer.
Make sure that this product is intact and that there are no missing parts.
To avoid damage to this product, be careful not to overtighten or improperly thread any of the
threaded fittings.
All photos are for illustrative purposes only.
3
Specifications
Stylus tip: Brush
System requirements:
Windows XP/7/8
One free USB port
9" to 17" monitor (WTP-10)
9" to 27" monitor (WTP-20)
Power Source: Two SR41 batteries
Batterylife: 50 hr.
Length: 5.7" (14.5 cm)
Diameter: 0.5" (1.2 cm)
Weight (with batteries): 0.67 oz. (19 g)
4
Contents Include
Windows Touch Pen
IR receiver
Metal strip (WPT-10)
USB Standard-A male to Mini-B male cable (WTP-10)
Metal bracket (WPT-20)
Extra brush
Two (2) SR41 batteries
Carrying pouch
Calibration software CD
User manual
5
Loading...