Xcellon CR-M10 User Manual

User Manual

Thank you for choosing Xcellon.

Transfer photos, videos, or other large files to a computer at blazing SuperSpeed USB 3.1 Gen 1
rates. Xcellon’s CR-M10 card reader accepts SD, microSD, and CompactFlash (CF) cards, and it’s
ready to go to work without any additional software or setup. The CR-M10 supports simultaneous
and inter-card transfer from all three card slots to maximize workflow and minimize downtime.

» Superspeed USB 3.1 Gen 1 interface

» CompactFlash, SD, and microSD

» Supports UDMA 7 and UHS-II

» Simultaneous and inter-card transfer

» Plug and play

» Status LED

» USB Type-C™ and USB Standard-A cables included

Precautions

Important! All cards must be inserted into the card reader label side up. Failure to do so could result in damage
to the memory card or the card reader.

» Memory cards should easily slide into the card slot. Do not force a memory card into the card reader.

» Speeds may vary based on system configuration and card speed.

» Do not pull on or attempt to detach the dust cover from the card reader.

» Images are for illustrative purposes only.

3