Xante FilmStar 4 Cleaning Instructions Manual
Instructions!Instructions!
XANTÉ’s FilmStar 4
Desktop Film Making Technology
1. Pour approximately 8 oz. of the 16 oz.
FilmStar Solution in the bottom of the
FilmStar System.
3. Turn the crank away from you slowly, fully
coating the film with solution.
© 2002-2003 XANTÉ CORPORATION. XANTÉ® is a registered trademark and FilmStar™ is a trademark of XANTÉ CORPORATION. XANTÉ CORPORATION:
Post Office Box 16526, Mobile, AL 36616-0526, USA, Tel. 251-473-6502, Fax: 251-473-6503, www.xante.com
2. Load film into the FilmStar System,
toner side up. Keep guiding it in until
you feel it stop.
Cleaning Instructions:
For best results, clean the FilmStar 4 base, roller,
and metal guide roller with warm, soapy water
after each use.
When finished using the FilmStar 4
system, please discard the FilmStar
solution in accordance with federal,
state, and local regulations.
XANTÉ 1-800-926-8839
Technical Support 1-800-926-8393
FS4 v1 12-9-02
Loading...