XBT 32-3FTP
Channels 1 and 2 Operating Areas
Current
Voltage
6
5
4
3
2
1
0
0 20 40 60
64
2 Isolated
Outputs
Series Output
Extended Range
Parallel Output
Extended Range
Channel 3 Operating Area
Current
Voltage
5
4
3
2
1
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
222 W
True Triple Output Digital Benchtop Power Supply
• Fully programmable 3rd output 15V/5A/30W
• High resolution, 16-bit programming and readback
• Isolated, tracking, parallel or series operation
• 100 hour timer
• USB Standard
The XBT32-3FTP adds to the capability of the
Xantrex benchtop product line with a 16-bit
triple output supply. Channels 1 and 2 can be
programmed 0-32V and 0-3A each. The third
output is fully programmable 0-15V, 0-5A up
to a maximum of 30W. Channels 1 and 2 can
be congured for tracking, parallel or series
operation to, in effect, provide the equivalent
of 6 different power supplies. In isolated mode,
each of the 3 outputs functions independently;
in tracking mode, channels 1 and 2 provide the
same, but isolated output; in parallel mode, there
is one 0-32V/0-6A output and one 0-15V/05A/30W output; in series mode, there is one
0-64V/0-3A output and one 0-15V/0-5A/30W
output.
Safety of devices under test is paramount. The
XBT series of power supplies provides superior
device protection. Each output is fully isolated
with voltage/current preview before turning
on the output. Built-in switches, in addition to
enabling the preview mode, can congure the
outputs for parallel or series connection while
graphics on the front panel show the user where
to make connections.
Advanced engineering features include storage
of 100 different setups (voltage and current)
as well as a 100 hour timer. Power- on state
and synchronous or individual control of each
channel output can also be set. Over-voltage and
over-current protection is programmed for each
channel.
Computer control is easily accomplished through
industry-standard SCPI commands via the USB
or RS-232C interfaces which come standard on
every unit. The GPIB / Ethernet interface option
allows 3 low power channels in a half-rack for
ATE applications. This option also includes an
8-bit digital I/O which can be set as input or
output signals for programming.
15–32 V
3–5 A
115 230
858.458.0223
sales@ProgrammablePower.com
85
XBT 32-3FTP : Product Specications
Output Ratings
Channel 1 and 2 Channel 3
Voltage (VDC) 0-32 0-15
Current (ADC) 0-3 0-5
Power (W) 96 30
Output Performance
Voltage Setting and Readback
Accuracy 0.01% + 5mV
Amplitude Resolution 1mV 1mV
Current Setting and Readback
Accuracy
Resolution
Voltage Ripple
Voltage Noise
Current Ripple
Load Regulation
Voltage 0.01% + 2mV 5mV
Current 0.01% + 300 µA
Line Regulation
Voltage 0.01% + 2mV
Current 0.01% + 300 µA
Stability (8 hours, constant load and temperature)
Voltage 0.02% + 2mV
Current 0.01% + 1mA
Temperature Coefcient (per C)
Voltage 0.01% + 3mV
Current 0.02% + 2mA
Transient Response 50µS
Voltage Programming Time (typical)
Rise Time (Full Load) 1ms 3ms
Rise Time (No Load) 1ms 3ms
Fall Time (Full Load) 3ms 8ms
Fall Time (No Load) 250ms 250ms
Common
Memory Storage 100 setups
Timer 1 second to 100 hours
Regulatory Compliance Compliant to CE Mark LVD EN61010-1, EMC EN61326
AC Input 115 / 230 VAC 10%, 47-63Hz
Operating Temperature 0 to 40 C
Storage Temperature -10 to +70 C
Weight 14.3 lbs. / 6.5 kgs
Size (WxHxD 8.5x5.3x17 in / 216x135x432 mm
Options and Accessories
M139 IEEE488.2 and Ethernet control interfaces
MHV Setup for 230V 10% AC Input
RM-XBT Rack mount kit for XBT Series power supplies
© 2008 Xantrex Technology Inc. All rights reserved. Xantrex and Smart choice for power are trademarks of Xantrex International, registered in the U.S. and other countries.
Elgar and Sorensen are trademarks of Programmable Division of Xantrex Technology Inc., registered in the U.S.
0.1% + 3mA 0.1% + 3mA
100 µA 100 µA
0.5 mVRMS 1mVRMS
5 mVpp 20mVpp
1mA 5mARMS
86
www.ProgrammablePower.com
Loading...