Xantech XSSD2100W Installation Instructions Manual

INSTALLATION INSTRUCTIONS

XSSD2100W

100Watt, Speaker Selector, Decora

A/B Speaker Selector, A/B Source Selector

DESCRIPTION

The XSSD2100W provides an easy-to-use, easy-to-install, A/B or A+B speaker selector switch. It is
also a A/B source selector switch. Premium components are used to provide high-quality speaker or
amplifier selection. The XSSD2100W requires no external power source. The XSSD2100W cannot be
used with high power bridged amplifiers.

SPECIFICATIONS

 Source input selectable, A or B switches
 Speaker output selectable, A or B or A+B switches
 Dimensions: 1.65” W x 4.0” H x 1.5” D
 Screw terminal connectors used with 16 to 22 AWG wiring.
 Rotary style switch

INSTRUCTIONS (Without Volume Control)

1) Remove ¼” of insulation from the ends of the wires.

2) Connect the following wires together. It is recommend to use the appropriate wire caps.
a. White to Yellow.
b. Gray to Orange.
c. Purple to Red.
d. Green to Brown.

3) Connect the two sources according to the chart below:

Source “1” Screw Terminal

Right + 2 Right + 1
Right – 3 Right – 3

Left – 4 Left – 4
Left + 6 Left + 5

4) Connect the two speaker pairs according to the chart below:

Speaker “A” Screw Terminal

Right + 9 Right + 8
Right – 7 Right – 7

Left – 12 Left – 12
Left + 11 Left + 10

Source “2” Screw Terminal

Speaker “B” Screw Terminal

08905088B - 1 -

The figure above shows the

XSSD2100W in an application with

two sources and two pairs of

speakers.

08905088B - 2 -