OPERATIONAL DESCRIPTION
Model No: FLR24G30
FCC ID : XQBFLR24
IC : 7503B-FLR24G30
1.TEST SET UP
You can use any commerciall y av ailable adapters to connect the miniPCI module to
Laptop/PC.
2.PROCEDURE TO GET INTO ART MODE
First ensure that miniPCI is recognized by your PC/Laptop. Pl check hat Atheros
MDK appears in Device Manager (My computer right click Ć scan for devices)
Power
mete
Mini PCI
PC
Copy the files in the āCā folder
Open the dos prompt
Key in the following commands
CD C:\ART_V53_build49ALL\art\bin
Art \id=2063
The following will appear
******
--- Atheros Radio Test (ART) ---
- Revision 5.3 BUILD #49
- Customer Version (ANWI BUILD)-
Reading in Configuration Setup from artsetup.txt
Calsetupfile Used : calsetup.txt
.......... WMAC function
::ANWI 1.3
Loading values for devNum [0] from eep file ar5006x_mb62ag.eep
Reading in Calibration Setup from calsetup.txt
.......... WMAC function
::ANWI 1.3
Loading values for devNum [0] from eep file ar5006x_mb62ag.eep
Reading in Calibration Setup from calsetup.txt
Attached to the Device for instance = 1
BOARD PARAMETERS EEPROM_SIZE = 400 checkSumLength = 400
Loading values for devNum [0] from eep file ar5006x_mb62ag.eep
Reading in Calibration Setup from calsetup.txt
Loading values for devNum [0] from eep file ar5006x_mb62ag.eep
Operating in 11g at channel 2.412GHz
=============================================
| AR5006x_mb62g (a/g) |
=============================================
Devlib Revision 5.3 BUILD #49
Devices detected:
PCI deviceID : 0x001b Sub systemID : 0x2063
MAC revisionID: 0xa5 BB revisionID: 0x61
RF productID : 0x6 RF revisionID: 0x3