XAC Automation XCE200WU User Manual



94m













SECURE CLOUD POS TERMINAL

INSTALLATION GUIDE

MODEL:



xCE-200WU-UH



xCE-200WU-U



1

1. Before Starting

Open the cable compartment cover behind the terminal (Figure 1) and find the
power input on the rear side of the terminal (Figure 2). Connect the plug from
the power adapter into the power input.

(Figure 1) (Figure 2)

■ Adapter spec:

LITEON PA-1061-71

Input: 100-240Vac 50/60Hz Output: 12V DC, 5A

■ Operating Temperature: 0 °C to 40 °C

■ RTC battery spec. : 3V, CR2032

Caution: Risk of explosion if the battery is replaced by an incorrect type.

Please dispose of used battery according to the instructions.



2

This terminal supports the following ports (Figure 3)

1 - 4 x USB ports
2 - 1 x Ethernet port
3 - 1 x RS232 Port
4 - 1 x micro SD card slot

Note:

{ Ensure that the micro SD card is inserted as the orientation of the

icon ( ) into micro SD card socket as in (Figure 3-1).

{ A “click” sound should be heard when the micro SD card has been

inserted properly.

5 - 1 x micro USB

7

6

8

3





12

9



(Figure 3)

3

5