XAC Automation E200NP User Manual

d

CLOUD POS PAYMENT DEVICE

XCL_E200NP SERIES

INSTALLATION GUIDE

xCL_E200NP series:

- xCL_E200NP-UN5

- xCL_E200NP-UNN

- xCL_E200NP-NN5

- xCL_E200NP-NNN

- xCL_E200NP-EN5

- xCL_E200NP-ENN

1. P

ACKAGE CONTENT

 xCL_E200NP  Power adaptor  USB cable

2. D

EVICE OVERVIEW

Take a view on your xCL_E200NP to find these Key Buttons & Interface Ports in Figure 1:

Front Side (L) Bottom

1. - Speaker

2. - Touch Display

3. - Magnetic Strip Reader slot

4. - Smart Card Reader slot

5. - Audio Jack

6. - Mini USB port

7. - Power Button

8. - Charging pins

9. - Camera

10. - Battery Compartment

Figure 1

■ POS spec

Input: 5V DC, 2A

■

Power Adapter spec:
Input: 100~240 Vac
Output: 5V DC, 2A

This symbol is intended to alert the user before starting using the POS.

( Caution: Use only the AC adapter approved and provided by XAC Automation
Corporation for use with this device. Use of any other AC adapter may cause a risk of fire

or explosion)

 Operating Temperature: 0

2. P

OWER ON/OFF THE DEVICE

To power on the device, long press the Power key (Figure 2) for 5 seconds until a buzzer sound
is heard, and screen is activated.
To power off the device, press the Power key for 2 seconds to select Power Off on the menu to
shut down the device.

o

C to 40oC

Figure 2

NOTE: xCL_E200NP will enter sleep mode automatically if unused for 1 minute.

3. U

SING THE MAGNETIC CARD READER

The magnetic card reader slot is on the right side of the device (Figure 3). Swipe the card
through the slot with magnetic stripe side facing the same direction as the display.