XAC Automation 8006L11CRA User Manual

D

T



1

O

R

E

S























PINPA

I

NS

8006L1-

ALLATI



CRA SE

N GUID

IE





















1. CONNECTING THE 8006L1-1CRA PIN PAD

The 8006L1-1CRA device can be used to connect with PC/ terminal. It supports RS232, USB
interfaces via different cable types such as DB9 (Figure 1) and standard USB (Figure 2) connector.

 Input voltage/current:

5V/500mA for 8006L1-1CRA USB or 12V/500mA for 8006L1-1CRA DB9
AC adapter for DB9: HON-KWANG ELECTRIC Co.,LTD HK-AX-120A200-EU

Input: 100-240Vac/0.8A, 50/60Hz.
Output: 12V/2.0A

 Operating Temperature: 0

Note: Turn off or unplug the PC/termi nal whenever you connect or di sconnect the PIN Pad. Be
sure the PC/terminal is not processing data when powered off.

℃~40℃

Figure 1 Figure 2 Figure 3

Caution: The cover (Figure 3) shall be provided with a means to keep it closed during normal

operation.

Warning: This is a Class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

2. USING CARD READER

MAGNETIC STRIPE READER

Find the card reader slot at the right side of PIN Pad.
Slide the card in either direction through the slot without stopping. If the card swipe fails, check
the position of the magnetic stripe and slide the card again. (Figure 4)

SMART CARD READER

Find the card reader slot on bottom of PIN Pad. Please insert the card completely and make sure
that it cannot be moved forward anymore. If inserted failed, check the position of the card and
insert the card again. (Figure 5)

CONTACTLESS READER

Contactless reader is on the top of 8006L1-1CRA. It will light up and blink with first green color
signal when 8006L1-1CRA is powered on and that means reader is working normally.
Put contactless card to approa ch the signal icon in the middle area of card reader (Figure 6) for
reading the card data during transaction.

Figure 4 Figure 5 Figure 6