X10 TM13E DATASHEET

Product number : TM13E

Transceiver

Module

230VAC - 50 Hz - 300W

LOAD RATING

Key Features

• Controls up to sixteen different X10 modules.

• Built-in appliance module switched outlet.

• Compatible with all X10 wireless remotes.

• Available in a wide range of plug style (British,

German, French, Italian, Euro-style, Swiss,

Australian / New Zealand, Danish, etc.).

Benefits

The TM13E responds to wireless Radio Frequency (RF)

signals from any X10 wireless remote controls or

wireless wall switches. It re-transmits, over the house

wiring, any signals it receives from these wireless

remote controls or wall switches.

A built-in appliance switched outlet responds to X10

signals received on the power line or to RF signals

received from any X10 wireless remote controls.

The TM13E responds to a serial control message in

"STANDARD" X10 format : "All units off" from any X10

controller set to its house code regardless of unit

code, or alternatively, by individual unit controller by

"On" and "Off".

The TM13E can be polled for its status by the CM11E

(two way universal computer interface) or by any

controller using the PROFESSIONAL X10 format.

When used with the CM11E interface, the TM13E acts

as the "RF gateway" to get signals from any X10

wireless transmitter onto the AC wiring, to be received

by the CM11E interface to initiate macros.

TYPICAL APPLICATIONS

This is the general purpose unit for the smallest to

largest applications. It can be a starter kit with an

X10 RF transmitter for remotely turning ON and OFF

any appliance. Equally it can be the interface for multi-

function macros.

Technical data

• Supply voltage: 230V ±10% 50 Hz

• Supply current : ≤ 20 mA capacitive

• Making capacity:

- 300W (incandescent lamps only)

- 2 A inductive loads

- 5 A (resistive loads)

• EMC emission: EN 50065-1

• EMC immunity: EN 50082-1

• Electrical safety:

- EN 60950 and EN 60065

• Approvals: CE Mark

• RF receiver frequency: 433,92 MHz

• X10 powerline:
120 kHz ± 2 kHz / 2,5 Vpk-pk

• Signal sensitivity:
15 mVpp min 50 mVpp max at 120 kHz

• Input impedance:

≥ 180 Ω (L - N) at 120 kHz

• Ambient temperature:

- 10° C to + 50° C (operation)

- 20° C to + 70° C (storage)

• Dimensions:
52 x 122 x 33 mm

(width x height x depth without plug)