X10 ST10XE DATASHEET

Product number : ST10XE

New Power Mid XL

now battery powered !

Key Features

• Battery powered receiver - up to 5000

hours operation time.

• Controlling your digital satellite receiver,

VCR, Stereo, CD player or DVD remotely.

• Works with almost any remote control unit

(including fast format codes) and TV / Video
/ Hi-Fi combination.

• New modern and stylish design

Benefits

Many homes today have been pre-wired with coaxial

cables to distribute the Audio/Video signal. But you still

need to send the IR control codes.

The POWERMID™ infrared remote control extender allows

you to use existing remote control units to operate TV,

VCR, Stereo, CD player, DVD or satellite systems from

anywhere in the home. No installation is required as the

units simply plug in to any AC outlet. POWERMID™ works

with any infrared controller including fast format code.The

complete POWERMID™ system consists of a transmitter

unit and a receiver unit .

The NEW POWERMID™ XL now features a receiver with

rechargeable batteries making the receiver independent

of a mains outlet. Battery operation is possible up to 5000

hours.

The POWERMID™ transmitter receives infrared pulses from

remote control units and re-transmits them as RF pulses

at 433.92 Mhz. These transmissions are detected by the

POWERMID™ receiver which converts them back into

infrared signals and sends them to the Audio/Video

equipment. No attempt is made to decode or convert

infrared signals from their original format. This allows

Powermid to work with almost any remote control unit

and TV/video/stereo combination.

Controls & Indicators

POWERMID TRANSMITTER (ST10XE):

• AC supply: 230VAC ±10% / 50 Hz

• RF Output: 433.92 MHz ±100kHz
1mW typical @ 3 m

• Approvals: EN 300 220-1

• CE Mark

• Operating Temperature: 0 to 40° C

• Storage Temperature: -20 to +70° C

POWERMID RECEIVER (P550):

• AC supply: 230VAC ±10% / 50 Hz

• Battery supply: 4 x LR 14

• RF Input: 433.92 MHz

• Operating Range: 60 m
approximately (open field)

• Approvals: CE Mark

• Operating Temperature: 0 to 40° C

• Storage Temperature: -20 to +70° C