X10 LM15E DATASHEET

Screw-In

Lamp Module

230VAC - 50 Hz - 100W

Load Rating

Key Features

• Small enough to fit into most lamp fittings

where it is hidden from sight.

• On/Off control of incandescent lighting.

Typical applications

• Create "two-way" switching in conjunction

with SS13E

Product number: LM15E

Benefits

The Screw-In Lamp Module is a 100W receiver unit.

It works in conjunction with any X10 controller.

There is no installation to be carried out. Just screw

it in the lamp fitting. It will adopt the first address it

receives through the mains as its house and unit code

(There is an E²PROM that stores the house and unit

code even when the power is cut).

The lamp concerned can still be controlled locally by

its own switch, but do not forget to leave the local

switch in the "ON" position, otherwise the lamp cannot

be controlled by an X-10 controller. Switch the lamp

off by remote control.

• Convenience with centralized control of

living room table lamps

Technical data

• Supply voltage: 230V ±10% 50 Hz

• Supply current : ≤ 20 mA capacitive

• Making capacity: 40 to 100W
(incandescent lamps only)

• EMC : according to EN 50081-1 and EN

50082-1

• Electrical safety: according to EN 60598

• Signal sensitivity:

15 mVpp min 50 mVpp max at 120 kHz

• Input impedance:

≥ 55 Ω (L - N) at 120 kHz

• Ambient temperature:

- 10° C to + 50° C (operation)

- 20° C to + 70° C (storage)