X10 IN47A GET STARTED

Multi-Camera System - Get Started Quickly!

x3x3

Unpack these items. Connect the first camera to its power

Select your TV’s video input (or try
channel 0 and then Channel Down).
The camera’s picture should appear.

supply and plug it into a wall outlet.

Plug in the transceiver and extend the
antenna.

Connect the wireless video receiver
to power and plug it into a wall outlet.

Put batteries (not included) in the
remote control.

Connect the video receiver to your TV
and turn its power switch ON.

Press 1 OFF to turn the first camera
off.

If you have any trouble getting your
system to work, follow each step
again and check each connection.
Try plugging the power supplies in
different wall outlets, too. For more
help, check our web site:

http://www.x10.com/support

Turn the number dial on the second
camera’s power supply to ‘2.’

Connect the second camera to power.
It will appear on your TV.

Press 1 ON to switch to camera 1, and
2 ON to go back to camera 2.

or e-mail us:
[e-mail]

GUIDE:

IN47A