X10 IN41A SETUP
Streaming XRay Vision with XCam2 Kit
or mount the XCam2 in the area
you desire and connect it to the
power supply. The camera is
now transmitting.
Important! Use of the Video to USB Converter
requires Windows 95 OSR2.1 with USB support or
Windows 98/XP/2000. Do not plug in the Video
Converter until the X10 software is installed.
Installing the XRay Vision Software
Before you connect the Video to USB
Converter (model VA10A) you must first
install the drivers and XRay Vision
Software. Download the software using
the link in the e-mail you received.
Next, run the installation application. Select the
directory where XRay Vision will be installed and
decide how you want XRay Vision listed on your
Windows Start menu. After that, the XRay Vision
installation program will automatically finish. You
are now ready to set up the Video to USB Adapter.
Connecting the USB Video Capture
Adapter
When the installation
program instructs you to,
plug the Video to USB
Converter connector into a USB port
on your computer. The computer will
recognize that new hardware has
been installed and complete the
installation.
Setting Up the Camera
First set the transmission channel on the
camera. Remove the rubber cap and use
a paper clip to change the setting - A is
at the bottom, D at the top. Next, place
Connecting the
Video Receiver to
the Video Capture
Adapter
1. Plug the yellow video plug on
the supplied cable into the Video
Out jack on the VR30A.
2. Connect the other end of the
cable to the yellow Video In jack
on the Video Capture Adapter.
3. Plug the PR30A power supply
into any 120V AC outlet.
4. Plug the power output of the
PR30A into the DC 12V plug on
the VR30A.
5. Make sure the Channel switch
on the underside of the VR30A
should be set to the same letter
as that on the XCam2.
Installing the Remote Viewer
After you have installed the XRay
Vision server, you can use the XRay
Vision remote viewer look at your
images from any PC connected to the
Internet. The remote viewer is
automatically installed with the server.
You can send the installer applications to family
and friends for their use in installing the remote
viewer.
For more help, see:
http://www.x10.com/support
MODEL
NUMBER:
IN41A
© Copyright 2000 X10 Wireless Technology, Inc.
Loading...