X10 HR12E DATASHEET

Product number : HR12E

Remote

Controller

16 Channel RF

remote controller

Key Features

• Lets you control up to sixteen X10 modules.

• Sends wireless RF signals to the transceiver

module TM13E or to any X10 wireless

security system

• Compatible with the full range of X10 home

automation products.

Benefits

The HR12E lets you control up to sixteen X10 modules
(lights and appliances) remotely from anywhere inside
or outside your home; even from your car as you enter
your driveway.

You can turn on and off, bright and dim any X10 module
set to the same house code as the HR12E.

A slide switch allows you to control modules set to house
code 1 thru 8 and 9 thru 16.

The wireless remote control HR12E is normally used with
the TM13E transceiver which passes through all codes
from the wireless wall switches onto the powerline to
control X10 modules. You can also use the wireless
remote control HR12 with any X10 security system
instead of the TM13E.

Typical applications

• Control lights or appliances from anywhere inside
or outside your home - in the yard or from your
car.

Technical data

• Batteries: 4 x AAA

• RF frequency: 418 or 433.92 MHz

• Radiated output: < 1mW

• RF operating range:
30 m (open field)

• Approvals: EN 300 220-3 - EN 301
489-3 - CE (R&TTE)

• CE Mark

• Ambient temperature:

-10°C to + 50°C (operation)

- 20°C to + 70° C (storage)

• Dimensions:

72 x 115 x 20 mm
(width x height x depth)

• Attach the wireless remote control to the wall
inside a doorway (using Velcro) so you can turn on
lights as you enter the room. Keep one by the
bedside so you can turn on lights if you hear a
strange noise in the middle of the night.

• A disabled person could use the wireless remote
control from a weelchair. The severely disabled
could use a mouthstick to operate the buttons on
the wireless remote control which could be easily
mounted on the wheelchair's armrest.