X10 GB10E DATASHEET

Key Features

• Supervised glass break sensor (sends a self

checking signal every 90 minutes).

• Uses full 16 bit Code for RF transmission.

• Battery operated with low battery detection.

• Dual technology for maximum reliability.

Benefits

The GB10E glass break sensor works with any X10

security system. The sensor, attached to the glass

with supplied adhesive tape, detects the vibrations

of the glass and listens for the glass breaking high

frequency. It sends a wireless radio frequency signal

to the main console when a glass is broken or hit by

a hammer. This dual technology ensures the glass

break sensor is not tricked by other noise. The GB10E

will detect breaking glass for the window that it is

adhered to and also the adjacent pane of glass in

the case of double windows.

When the security system is armed, the alarm is

tripped when a glass is broken. A slide switch on the

front of the glass break sensor lets you select the

sensitivity.

The sensor sends a "self-checking" transmission

approximately every 90 minutes. The console will not

arm if a glass break sensor hasn't reported in (can

be overdriven by pressing the console's Accept

Button).

In addition to the glass break function, the GB10E

fixed to window glass is the ideal device for detecting

dusk. Not only dual technology but also dual function

! The GB10E sends a special message to the security

console to advise "dusk" has arrived. The security

console activates "lived-in look" on reception of the

signal.

Glass Break

Sensor

Product number : GB10E

Technical data

• Batteries: 2 x AAA

• Operating life: 2 years using alkaline
batteries

• RF frequency: 433.92 MHz

• Radiated output: < 1mW @ 3m

• RF operating range: 30 m (open field)

• Code for RF transmission: 16 bit (65536
different codes)

• Approvals:

- EN 300220-3 & EN301489-3

- CE Mark (R&TTE)

• Ambient temperature:

- 10° C to + 50° C (operation)

- 20° C to + 70° C (storage)

• Dimensions:
53 x 75 x 22 mm

(width x height x depth)