X10 DK10E DATASHEET

Deters intruders before they break in

Key Features

• Automatically activates a high quality digital recording
of a dog barking when the outdoor PIR senses
movement from an approaching intruder.

• Automatically turns on a light a few seconds after
barking starts (with Lamp Module) to increase realism.

• Automatically turns on one or more lights at dusk and
turns them off again at dawn.

• Compatible with the full range of X10 home automation
products including HR10E and RW10 Home Automation
remotes.

• PIR also works with X10 transceivers and security
systems.

Barking Dog

Barking Dog System -

Product number : DK10

Benefits

The FBI rates sound and light as the two best intruder
deterrents. Barking Dog is an innovative and yet
attractively simple product that provides both - it
barks when an intruder approaches and switches on
lights a few seconds later, just as the owner would if
he were there. It also turns lamps on at dusk and off
at dawn while the owner is away.

Conventional burglar alarm systems are very effective; but,
they do have one drawback: the intruder has already forced
the door or entered the home by the time the alarm is
triggered. What is really needed is a system that can protect
the home before the burglar breaks in - a first line of
defence.

The solution is man's best friend. No one complains about
the occasional barking of a dog from inside the house, but
it is a highly effective deterrent when someone approaches
the door, especially when lights turn on as 'the owner comes
to investigate'.

A weatherproof infrared motion detector discretely mounted
above the front door detects an approaching person and
sends a radio message to trigger the base unit.

The powerful integrated loudspeaker plays back a high
quality digital recording of a barking dog. In the next few
seconds a light comes on in the hallway and the effect is
complete - a convincing demonstration that this is one home
that should be left alone.

Additionally, at night, a light sensor built into the motion
detector automatically triggers the base unit to turn on
other lights in the home - a well proven intruder deterrent.
You can even control the lights yourself using an X10
wireless remote.

USING THE PIR MOTION DETECTOR WITH OTHER X10
PRODUCTS.

The Outdoor PIR Motion Detector can also be used with
other X10 security systems or transceiver modules to turn
lights on at dusk and when someone approaches.

Technical data

• Option 1 : Dog + Keychain

• Option 2 : Dog + PIR + Keychain +
Lamp Module

Controls & Indicators

BASE UNIT

• Push button on/off at back of unit.

• Rotary code wheel at back of unit to
set X10 House Code.

• Rotary volume control.

PIR MOTION DETECTOR

• LED indicator lights when motion
detected.

Specifications

BASE UNIT

• AC supply: 220VAC/50 Hz

• Batteries: 9 x 'C' cells

• RF receiver frequency: 433 MHz

• X10 Powerline: 120 KHz/2.5 V pk-pk

• Approvals: CE Mark ­EMC:EN50082-1, EN50065-1,
ETS 300220
Safety : EN60065, EN 60950

PIR MOTION DETECTOR

• Batteries: 4 x 'AA' cells

• RF frequency: 433 MHz

• Approvals: CE Mark - ETS300220