X10 CM19A INSTALLATION INSTRUCTION
FireCracker RF Computer Interface/T ransceiver
Model CM19A
INSTALLATION INSTRUCTIONS
The CM19A Computer Interface sends and receives Wireless Radio
Frequency (RF) signals, and works with X10’s MultiView or X-Ray Vision
software. It receives RF commands from X10 motion detectors (sold
separately) and communicates these commands to the MultiView or X-Ray
Vision software. The software interprets these commands and tells a CM19A
to transmit the appropriate RF commands to a TM751 Transceiver (sold
separately). The CM19A can therefore work with the MultiView or X-Ray
Vision software to automatically turn on lights, appliances, and cameras when
X10 motion detectors are tripped.
F.C.C. CAUTION - THIS DEVICE COMPLIES WITH PART 15 OF THE
FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
NOTE: NO CHANGES OR MODIFICATIONS MAY BE MADE TO THE
UNITS. ANY CHANGES MADE TO THE UNITS WILL VOID THE
USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
IMPORTANT: Use of the CM19A requires Windows
®
95 OSR 2.1 with
USB support, or Windows 98.
DO NOT plug the CM19A into your PC until you install the X10
software.
1. Download the desired software application from:
www.x10.com/software
2. Install the software following the instructions that came with it.
3. When instructed during the installation process plug the CM19A into any
unused USB port.
4. Windows will recognize the CM19A and complete the installation. Refer to
the application's help file for additional information.
For more information, please visit:
www.x10.com/support
®
Windows is a Registered Trademark of Microsoft Corporation.
X10 Wireless Technology, Inc. LIMITED 1-YEAR WARRANTY
X10.com, a division of X10 Wireless Technology, Inc. (X10) warrants X10 products to be free
from defective material and workmanship for a period of one (1) year from the original date of
purchase at retail. X10 agrees to repair or replace, at it’s sole discretion, a defective X10 product
if returned to X10 within the warranty period and with proof of purchase.
If service is required under this warranty:
1. Call 1-800-675-3044 or visit www.x10.com, or e-mail sales@x10.com to obtain a Return
Merchandise Authorization (RMA) number.
2. Return the defective unit postage prepaid to X10 (see address on back).
3. Enclose a check for $4.00 to cover postage and handling.
4. Enclose a dated proof of purchase.
5. X10 is not responsible for shipping damage. Units to be returned should be packed
carefully.
Please visit www.x10.com/warranty
to complete your on-line warranty registration. Thank you.
CM19A-9/01
Loading...