wysLink WP115, WP158V, WP158W, WP196W, WP196V Quick Manual

KYTRON TECHNOLOGY CORPORATION

TEL. [phone]

www.wysLink.com

WP Series P2P Camera Quick Guide

(Model: WP115, WP158V, WP158W, WP196V, WP196W)

Connecting the Hardware

Camera Connection

1. Put the camera near the wireless router, plug one end of the enclosed power adapter into the power jack
of the camera, and the other end of the power adapter into the wall outlet.

2. When camera finishes rotating and Ding-Dong tone coming out, it means that IP camera is ready for
receiving smart Wi-Fi configuration.
if you connect the camera with Ethernet cable, there will not be any Ding-Dong tone coming out from
camera. Ethernet cable has to be connected when use method 1 to add camera.

3. Make 2.4GHz Wi-Fi available on your mobile phone, and connected to the same local area network.

Note1 : when the IP camera is in the initial state, there is Ding-Dong tone coming out from it. Here are three
methods to suspend the Ding-Dong tone:

1. connect your IP camera to the router with Ethernet cable;

2. connect your IP camera to the router via smart-configuration;

3. power off the IP camera.

Download and Install App

Android users can search “IPCAM P” from Google Play store, or just scan the QR-code below to download the
App.

Camera, Videos and digital Marketing

KYTRON TECHNOLOGY CORPORATION

TEL. [phone]

www.wysLink.com

iOS users can download IPCAM P from App Store. After installing, the icon will pop up

on the mobile phone.

Add Camera into App

To add the camera into app, following methods are available.

Method 1: Connect by LAN cable, add camera by LAN search or QR code scan, then set Wi-Fi

Connect camera with your router by LAN Ethernet cable, then either add camera by scanning QR code on
camera label, or searching the camera in your local next work. Need do Wi-Fi Settings, if you plan to connect
camera with router via Wi-Fi.

Method 2 Use smart Wi-Fi configure
It uses Wi-Fi to add camera automatically without LAN cable connection. Please note that it is only for specific
camera models, and does not work for all Wi-Fi routers. Please use the method1 if it fails.

Use Method 1 Connect by LAN cable, add camera, and set Wi-Fi

1. Run the IPCAM P App. Click on on the home screen, then click on “Next” from the second option “Ethernet
cable connection”.

2. Click on “LAN Search” to pair the camera with internet.

3． Choose the camera from the LAN search list. If the camera not appears in the list, click on refresh button to
search again.

Camera, Videos and digital Marketing