Wyrestorm TX-70-4K Quick Start Manual
PDF provided by Conference Room AV
WyreStorm TX-70-4K 4K UHD HDMI, HDBaseT Transmitter - 230'
4K HDBaseT Transmitter with PoH
TX-70-4K
Quickstart Guide
WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the installation
process.
Before You Begin
• WyreStorm recommends visiting the product page before installing this
product for updates to this Quickstart Guide as well as other information
about the product.
• Verify that all items are included in the packaging per the In The Box list.
In The Box
1x TX-70-4K Transmitter
1x 3-pin Phoenix Connectors
1x Wide-band IR Emitter
1x Wide-band IR Receiver (30-50KHz)
2x Mounting Brackets
Associated Products
1x Quickstart Guide (this document)
The TX-70-4K transmitter is designed to work with WyreStorm HDBT Input
cards as well as WyreStorm HDBaseT receivers allowing for flexibility in
system designs.
• H2X HDBaseT Matrix (with TX-H2X-HDBT card installed) – Allows for the
TX-70-4K to be used as a source on the matrix.
• RX-70-4K HDBaseT Receiver – Used when the output of the TX-70-4K is
going to a single display.
Basic Wiring Diagram
UHD Source
TX-70-4K
MX-1616-HDBT-H2X
with TX-H2X-HDBT
HDBaseT Cat5e/6/6a
HDMI/Digital Video HDBaseT/Ethernet
Key
HDMI IR Emitter Ethernet
HDBaseT Cat5e/6/6a
IR
Copyright © 2017 WyreStorm Technologies | wyrestorm.com
TX-70-4K Quickstart Guide | 170804
1 of 4
North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343
support@wyrestorm.com
Loading...