Wyrestorm EXP-EX-COAX-50 Instruction Manual
Thank you for choosing this WyreStorm Express product.
Please read these instructions carefully before installing to avoid complications later.
Instruction Manual
exp-EX-COAX-50
50m Coaxial Extender with 2-way IR
& EDID Management
RoHS
0115
2
Contents
Introduction
Features
Safety Precautions
WARNING
To reduce the risk of re, electric shock
or product damage:
FEATURES AND SAFETY PRECAUTIONS
3. Safety Precautions
WARNING
To reduce the risk of fire, electric shock
or product damage:
• Protection against ESD (electrostatic discharge) included within
the unit to further stabilise transmission.
• LED indications for clear power and video signal selection.
• 5v mains supply included but receivers may be powered through the
USB port of the display using Wyrestorm USB to 5v power adaptor)
• Fully cascadable to further lengthen transmission.
*NOTE: ideal conditions denote cable run is within
specified distance range of product, no electrical
interference, the use of straight cable runs with no bends
or kinks and no patch panels or wall outlets used. Please
be advised that the presence of any of these factors in
your installation may compromise bandwidth and signal
strength. For longer transmission distances, RS232 control
and Ethernet pass-through, please see our full HDBaseT
or HDBT Lite range of matrices, transmitters, receivers and
extender sets.
USB to 5V Cable
Part Number
CAB-USB-5V
Introduction
Features
Safety Precautions
Specication
Panel Description
i. Transmitter
ii. Receiver
Typical Application
Connection & Operation
EDID & Distance Setting
Troubleshooting
FAQ’s
Maintenance
Product Service
Mail In Service
Warranty
Warranty Limits and Exclusions
Installation Notes
The WyreStorm Express™ EXP-EX-COAX-50 is a single
cable point to point HDMI extender set using copper-core
75Ohm Coax cable to transmit 1080p HD video @60Hz
and multi-channel HD audio over distance up to 50m
(164ft) including wide-band, 2-way IR control from both
source and display location.
The ‘Analog Sun’ may have set, but even in these days
of digital distribution, the use of coax as a cable medium
is still a popular requirement to transmit and control HD
signals between sources and display location in legacy or
mixed analog/digital systems such as antenna and cable/
satellite installations, where coax is eective due to the
low loss at high frequencies, vital for TV Set-top boxes
and cable modem installations.
Key to any installation is successful transmission, with
the EXP-EX-COAX-50 featuring EDID management
to manually handle device communication and cable
distance settings to ne tune signal extension based
on the length of cable between devices to maximise
compatibility and reliable delivery of the signal between
source and display.
Maintaining the integrity of the distribution within the
installation environment is also paramount and the EXPEX-COAX-50 include protection against ESD (electrostatic
discharge) to further stabilise transmission with LED
indication on the unit housing providing clear conrmation
of power and signal link status.
As scalable as they are reliable, the EXP-EX-COAX-50
can be cascaded by connecting additional multiple
extenders to further lengthen transmission and
oer greater exibility, whatever the application. The
WyreStorm Express™ EXP-EX-COAX-50 is the perfect
solution for retrot HD distribution projects in which a
Coax cable infrastructure is already present, as well for
installers whose primary experience lies in antenna and
satellite installations.
• Single Coax cable extends 1080p HD video @ 60Hz
and multi channel audio transmissions over distances
up to 50m (164ft)
• Automatically adjusts signal feedback, equalization and
amplication
• EDID/Setting DIP switches on transmitter and receiver
encourages communication between source/display
devices to solve compatibility issues
• HDMI 1.3 supported
• Each port supports HDMI or DVI signals
• HDCP compliant
• LED indication of device power and video signal status
Units contain ESD (electrostatic discharge) protection
technology to guard again static build-up that can
damage circuitry
• Wide band, 2-way IR control of source from display
locations and display from source locations
• 24bit color depth (True color)
• Mounting brackets supplied
• Lockable BNC connectors
• IR receiver, emitter and 5v mains power supply included
• Units can be cascaded by connecting additional
transmitters and receivers to further expand distribution
1. Do not expose this apparatus to rain, moisture,
sprays, drips or splashes and ensure that no objects
containing liquids are placed on the apparatus,
including cups, glasses and vases.
3
Specication
Package Contents
Dimensions (W x H x D) 152mm/5.9” x 31mm/1.2” x 105mm/4.1”
Weight 0.9kg / 1.98lb
Operating Temperature Range -5 to +35°C (-41 to +95 °F)
Operating Humidity Range 5 to 90 % RH (no condensation)
Video Amplier Bandwidth 6.75Gbps
Input Video Signal 0.5-1.0 volts p-p
Input DDC Signal 5 volts p-p TTL
Maximum Single Link Range 1080p 24bit Colour Depth
Transmission distance 50m / 164ft max. (75Ω)
Video Format Supported VESA: 640x480, 800x600,1024x768, 1280x1024,1600x1200,
1920x1200
DTV/HDTV: 720p/1080i/1080p
Output Video HDMI 1.3+HDCP (Mirrors source to sync)
Audi Format Supported Channel 7.1/5.1/stereo audio (PCM only)
Power Supply 5VDC - from mains
Power Consumption 5 Watts (Max.)
BTU Rating (British Thermal Unit) 17.06
Rack Space Required N/A
2. Do not place this unit in a conned space such as
enclosed shelving, cabinets or bookshelves.
3. Ensure the unit is adequately ventilated.
4. To prevent the risk of electric shock or re hazard
due to overheating, do not cover the unit or obstruct
ventilation openings with material, newspaper,
cardboard or anything that may restrict airow into
the unit.
5. Do not install near external heat sources such as
radiators, heat registers, boilers or any device that
produces heat such as ampliers or computers and
do not place near sources of naked ame.
6. Unplug apparatus from power supply during
lightening storms or when unused for long periods of
time.
7. Protect the power cable from being walked on,
pinched or restricted in any way, especially at plug
connections.
8. Only use attachments/accessories specied by the
manufacturer.
9. Units contain non-servicable parts - Refer all servicing
to qualied service personnel.
• 1 x EXP-EX-COAX-50 transmitter
• 1 x EXP-EX-COAX-50 receiver
• 1 x Printed quickstart installation guide*
• 2 x Pairs mounting brackets
• 2 x 5VDC power supply
• 1 x IR emitter for source connection
• 1 x IR receiver for display connection - IR frequency range:
30KHz to 56KHz
4
3
6
1
4
7
2
5
8
9
3
6
1
4
7
2
5
8
9
EDID – see Transmitter EDID for details
(section 9)
ISP Port – Mini USB port for rmware updates
COAX Output
Power indication – LED lit when powered
Status indication – LED lit when signal detected
HDMI Input
IR TX Output – 3.5mm IR emitter connecting to
source device for control from display location.
IR RX Input – 3.5mm IR Receiver placed at display
location to remotely control the source device.
5V Power Input
Setting – see Receiver Settings for details
(section 9)
ISP Port – Mini USB port for rmware updates
COAX Input
Power indication – LED lit when powered
Status indication – LED lit when signal detected
HDMI Output
IR TX Output – 3.5mm IR emitter connecting to
source device for control from display location.
IR RX Input – 3.5mm IR Receiver placed at display
location to remotely control the source device.
5V Power Input
Panel Description
- Transmitter
Panel Description
- Receiver
1 12 23 3
4 45 5
6 67 79 98 8
Loading...