Wyrestorm EX-1UTP-IR-50-POH Instruction Manual

Technical Support: [e-mail] US: [phone] EU: [phone]

1

Instruction Manual

Thank you for choosing this WyreStorm product.

Please read these instructions carefully before installing to avoid complications later.

EX-1UTP-IR-50-POH

Single Cable Cat5e/6/7 HD Extenders with IR and PoH

Technical Support: [e-mail] US: [phone] EU: [phone]

2

Contents

CONTENTS, INTRODUCTION, FEATURES, AND FEATURES

• HDBaseT extenders capable of 1080p HD @60Hz and
HD multichannel audio transmissions up to 50m (164ft)
under perfect conditions*

• Transmits discrete wide-band two-way IR control signal
together within the HDMI signal over a single Cat5e/6/7
cable

• Power-over-HDBaseT (PoH) - 12v Mains connected
Transmitters pass unidirectional power along the
Cat5e/6/7 to remotely power display receivers - no
additional power required at display locations.

• Fully supports 3D applications - frame packing/
sequential (Blu-ray) and Interlaced Stereoscopic
(satellite/cable) broadcasts

• Supports 36bit Deep Colour

• HDMI V1.4

• Cable termination follows IEEE-568B standards

• HDCP compliant

• Automatically adjusts feedback, equalization and

amplication of signal for easy installation.

• LED indication for visual power and HDMI / HDBaseT
video signal status.

• Fully cascadable to further lengthen transmission and
increase your distribution capabilities.

*Perfect transmission conditions denote straight cable
runs with no electrical interference, bends, kinks, patch
panels or wall outlets.

1. Introduction

The WyreStorm EX-1UTP-IR-50-POH extender set
features Class B HDBaseT technology and PoH for
an even more affordable HDBaseT extender solution
over shorter distances up to 50m/164ft. Designed for
smaller projects that may not require the feature set

of full HDBaseT yet still benet from the signal stability

and functions offered by this powerful technology,
including distribution of full 1080p HD video, HD audio,
bidirectional IR and remote power passed through a
single Cat5e/6/7 cable from the transmitter to power the
display receiver.

The EX-1UTP-IR-50-POH Extender set comprises
of a Transmitter and Receiver to distribute full,
uncompressed HD 1080p video @60Hz, HD
multichannel audio with bidirectional discrete IR control
of source and display from either location over distances
of up to 50m/164ft using a single shielded or unshielded
Cat5e/6/7 cable.

Featuring Power-over-HDBaseT, the Transmitter draws
12v power from a mains supply and passes along the
length of a single Cat5e/6/7 cable with the video, audio
and control signals to power the receiver - no power
access is necessary at the display location for ease of
installation and connection; meaning no additional power

adaptors required and improved energy efciency.

Transmitters include EDID management to manually
handle device communication via DIP switch setting,
with Receivers containing long cable mode to further
encourage successful transmission if the distance of the
cable run is an issue. Both units also feature protection
against ESD (electrostatic discharge) to further stabilise
transmission with LED indication on the unit housing

providing clear conrmation of power and signal link

status. Both units also contain DIP settings.

Additionally, the EX-1UTP-IR-50-POH is fully cascadable,
with transmission lengthened by connecting to multiple
50m/164ft extender sets for increased distribution

and even greater exibility, whatever the installation

environment.

2. Features

Introduction

Features

Safety Precautions

Packaging Contents

Specication

Typical Application

Troubleshooting

FAQ’s

EDID Setting

Maintenance

Product Service

Panel Description

i. Transmitter

ii. Receiver

Connection & Operation

1

2

3

4

5

6

7

8

9

10

11

12

14

13

15

16

17

Mail In Service

Warranty

Warranty Limits and Exclusions

Installation Notes

Technical Support: [e-mail] US: [phone] EU: [phone]

3

SAFETY PRECAUTIONS, PACKAGE CONTENTS AND SPECIFICATION

3. Safety Precautions

• 1 x WyreStorm EX-1UTP-IR-50-POH TRANSMITTER

• 1 x WyreStorm EX-1UTP-IR-50-POH RECEIVER

• 1 x Printed quick start installation guide (also
downloadable from this product main page)

• 2 x pairs of balun mounting brackets

• 1 x 12VDC power supply

• 1 x IR TX infrared Transmitter - for IR control of to
Source device from display zone

• 1 x IR RX infrared Receiver - to receive IR control
signals in Display zone to Source. (IR frequency
range: 940nm IR Frequency: 38KHZ)

5. Unplug apparatus from power supply during

lightening storms or when unused for long periods
of time.

6. Protect the power cable from being walked on,

pinched or restricted in any way, especially at plug
connections.

7. Only use attachments/accessories specied by the

manufacturer.

8. Units contain non-servicable parts - Refer all

servicing to qualied service personnel.

4. Package Contents

5. Specication

1. Do not expose this apparatus to rain, moisture,
sprays, drips or splashes and ensure that no
objects containing liquids are placed on the
apparatus, including cups, glasses and vases.

2. Do not place this unit in a conned space such as

enclosed shelving, cabinets or bookshelves.
Ensure the unit is adequately ventilated.

3. To prevent the risk of electric shock or re hazard

due to overheating, do not cover the unit or
obstruct ventilation openings with material,
newspaper, cardboard or anything that may restrict

airow into the unit.

4. Do not install near external heat sources such as
radiators, heat registers, boilers or any device that

produces heat such as ampliers or computers and
do not place near sources of naked ame.

Dimensions (WxHxD): 120mm/4.72” x 24mm/0.94” x 101mm/3.97”

Weight (Kg): 0.36kg / 0.79lb (Transmier)

0.36kg / 0.79lb (Receiver)

Operang Temperature Range: -5 to +35°C (-41 to +95 °F)
Operang Humidity Range: 5 to 90 % RH (no condensaon)
Video Amplier Bandwidth: 6.75Gbps
Input Video Signal: 0.5-1.0 volts p-p
Input DDC Signal: 12 volts p-p (TTL) (Transmier)
Maximum Single Link Range: 1080p 24bit colour depth
Transmission distance: 1080p signal up to 15m/ 49 HDMI
Video Format Supported: VESA:
640x480, 800x600, 1024x768, 1280x1024, 1600x1200,
1920x1200 DTV/HDTV: 480i/576i/480p/576p/720p/10
80i/1080p
Output Video: HDMI 1.4+HDCP (Sync mirrors source), including 3D -
frame packing/sequenal (Blu-Ray) and Stereoscopic
(Satellite/Cable broadcasts)
Maximum transmission distance: 1080p signal up to 50m / 164 (Under perfect trans
mission condions including straight cable runs with no
electrical interference, bends, kinks, patch panels or
wall outlets.)
Power Consumpon: 15Was (max.)
BTU Rang (Brish Thermal Unit): 75.02

WARNING

To reduce the risk of re, electric shock

or product damage:

FEATURES AND SAFETY PRECAUTIONS

3. Safety Precautions

WARNING

To reduce the risk of fire, electric shock
or product damage:

• Protection against ESD (electrostatic discharge) included within

the unit to further stabilise transmission.

• LED indications for clear power and video signal selection.

• 5v mains supply included but receivers may be powered through the

USB port of the display using Wyrestorm USB to 5v power adaptor)

• Fully cascadable to further lengthen transmission.

*NOTE: ideal conditions denote cable run is within
specified distance range of product, no electrical
interference, the use of straight cable runs with no bends
or kinks and no patch panels or wall outlets used. Please
be advised that the presence of any of these factors in
your installation may compromise bandwidth and signal
strength. For longer transmission distances, RS232 control
and Ethernet pass-through, please see our full HDBaseT
or HDBT Lite range of matrices, transmitters, receivers and
extender sets.

USB to 5V Cable

Part Number

CAB-USB-5V

Technical Support: [e-mail] US: [phone] EU: [phone]

4

6i. Panel Description - Transmitter

PANEL DESCRIPTION - TRANSMITTER

10

9

8

1

2 3

4

5

6

7

3

6

1

4

7

2

5

8

9

10

EDID DIP – EDID management to aid
communication between devices during
installation (see Transmitter EDID Settings for
details).

IR RX Input – 3.5mm IT Receiver placed atdisplay
location to remotely control the source device.

IR TX Input – 3.5mm IR Transmitter connecting to
source device for control from display location.

Signal LINK status – LED lit when signal detected

HDBaseT OUTPUT

Power indication – LED lit when powered

5v Power Input – optional: for use if power supply
issues are experienced at Transmitter location.

Earth Ground

HDMI INPUT

EDID DIP Switch settings – printed on base of
Transmitter (see Transmitter EDID Settings for
details).

Technical Support: [e-mail] US: [phone] EU: [phone]

5

6ii. Panel Description - Receiver

PANEL DESCRIPTION - RECEIVER

1

2 3

4

5

6

7

9

8

10

DIP SWITCH SETTING – Toggles Long Cable Mode
ON/OFF to aid successful transmission over longer
cable distances (see Receiver DIP Settings for
details).

IR RX Input – 3.5mm IT Receiver placed at display
location to remotely control the source device.

IR TX Input – 3.5mm IR Transmitter connecting to
source device for control from display location.

Signal LINK status – LED lit when signal detected

HDBaseT INPUT

Power indication – LED lit when powered

5v Power Input – optional: for use if power supply
issues are experienced at Transmitter location.

Earth Ground

HDMI OUTPUT

DIP SWITCH SETTINGS – printed on base of
Receiver (see Receiver DIP Settings for details)

3

6

1

4

7

2

5

8

9

10