Wyrestorm EX-1UTP-IR-50 Instruction Manual

Technical Support: [e-mail] US: [phone] EU: [phone]

1

Instruction Manual

Thank you for choosing this WyreStorm product.

Please read these instructions carefully before installing to avoid complications later.

EX-1UTP-IR-50-POH

50M/164FT HDMI Extension Over HDBaseT incl.
Remote Power, full 3D & Bidirectional IR

EX-1UTP-IR-50

50m/164ft HDMI Extension over HDBaseT incl.
full 3D & Bidirectional IR

Technical Support: [e-mail] US: [phone] EU: [phone]

2

Contents

CONTENTS, INTRODUCTION, FEATURES, AND FEATURES

• HDBaseT extenders capable of 1080p HD @60Hz and
HD multichannel audio transmissions up to 50m/164ft
under perfect conditions*

• Discrete two-way IR control signal together with HDMI
signal over a single Cat5e/6/7 cable

• Power-over-HDBaseT (PoH) - 12v Mains connected
Transmitters pass unidirectional power along the Cat5e/6
to remotely power display receivers - no additional power
required at display locations. (EX-1UTP-IR-50-POH only)

• Fully supports 3D applications - frame packing/
sequential (Blu-ray) and Interlaced Stereoscopic (satellite/
cable) broadcasts

• Supports 36bit Deep Colour

• HDMI V1.4

• Cable termination follows IEEE-568B standards

• HDCP compliant

• Automatically adjusts feedback, equalisation and

amplication of signal for easy installation.

• LED indication for visual power and HDMI / HDBaseT
video signal status.

* Perfect transmission conditions denote straight cable
runs with no electrical interference, bends, kinks, patch
panels or wall outlets.

1. Introduction

The WyreStorm EX-1UTP-IR-50 and EX-1UTP-IR­50-POH extender models feature Class B HDBaseT

technology for an even more aordable HDBaseT

extender solution over shorter distances up to
50m/164ft.

Designed for smaller projects that may not require the

feature set of full HDBaseT yet still benet from the
signal stability and functions oered by this powerful

technology, including distribution of full 1080p HD
video, HD audio and bidirectional IR, with the PoH
model including remote power passed through a single
Cat5e/6 cable from the transmitter to power the display
receiver.

The EX-1UTP-IR-50 and POH Extender models
comprise of a transmitter and receiver to distribute
full, uncompressed HD 1080p video @60Hz, HD
multichannel audio with bidirectional discrete IR control

of source and display from either location over distances
of up to 50m/164ft using a single shielded or unshielded
Cat5e/6 cable.

The EX-1UTP-IR-50-POH features Power-over-HDBaseT
technology, that enables the transmitter to draw 12v
power from a mains supply and pass the current along
the length of a single Cat5e/6 cable along with the video,
audio and control signals to power the receiver - no
power access is necessary at the display location for
ease of installation and connection; meaning no additional

power adaptors required and improved energy eciency.

Transmitters of both models include EDID management
to manually handle device communication via DIP
switch setting, with Receivers containing cable distance
setting mode to encourage successful transmission if
the distance of the cable run is an issue. Transmitters
and receivers of both models also feature protection
against ESD (electrostatic discharge) to further stabilise
transmission with LED indication on the unit housing

providing clear conrmation of power and signal link

status.

Both models are fully cascadable with distribution
increased by connecting multiple extenders for greater

exibility, whatever the application.

2. Features

Introduction

Features

Safety Precautions

Packaging Contents

Specication

Typical Application

Troubleshooting

FAQ’s

EDID & Distance Setting

Maintenance

Product Service

Panel Description

i. EX-1UTP-IR-50 Transmitter & Receiver

ii. EX-1UTP-IR-50 - POH Transmitter & Receiver

Connection & Operation

1

2

3

4

5

6

7

8

9

10

11

12

14

13

15

16

17

Mail In Service

Warranty

Warranty Limits and Exclusions

Installation Notes

Technical Support: [e-mail] US: [phone] EU: [phone]

3

SAFETY PRECAUTIONS, PACKAGE CONTENTS AND SPECIFICATION

3. Safety Precautions

• 1 x WyreStorm EX-1UTP-IR-50 / EX-1UTP-IR-50­POH Transmitter

• 1 x WyreStorm EX-1UTP-IR-50 / EX-1UTP-IR-50­POH Receiver

• 1 x Printed product manual and quick start guide (also
downloadable from this product main page)

• 2 x pairs of mounting brackets for transmitter/receiver

• 2 x 5VDC power supply (EX-1UTP-IR-50) / 1 x 12VDC
power supply (EX-1UTP-IR-50-POH)

• 1 x IR TX for IR control of to Source device from
display zone

• x IR RX to receive IR control signals in Display zone
to Source. (IR frequency range: 940nm IR Frequency:
38KHZ)

5. Unplug apparatus from power supply during

lightening storms or when unused for long periods
of time.

6. Protect the power cable from being walked on,

pinched or restricted in any way, especially at plug
connections.

7. Only use attachments/accessories specied by the

manufacturer.

8. Units contain non-servicable parts - Refer all

servicing to qualied service personnel.

4. Package Contents

5. Specication

1. Do not expose this apparatus to rain, moisture,
sprays, drips or splashes and ensure that no
objects containing liquids are placed on the
apparatus, including cups, glasses and vases.

2. Do not place this unit in a conned space such as

enclosed shelving, cabinets or bookshelves.
Ensure the unit is adequately ventilated.

3. To prevent the risk of electric shock or re hazard

due to overheating, do not cover the unit or
obstruct ventilation openings with material,
newspaper, cardboard or anything that may restrict

airow into the unit.

4. Do not install near external heat sources such as
radiators, heat registers, boilers or any device that

produces heat such as ampliers or computers and
do not place near sources of naked ame.

Dimensions (WxHxD): 120mm/4.72” x 24mm/0.94” x 101mm/3.97”
Weight 0.36kg / 0.79lb (Each)

Operang Temperature Range: -5 to +35°C (-41 to +95 °F)
Operang Humidity Range: 5 to 90 % RH (no condensaon)
Video Amplier Bandwidth: 6.75Gbps
Input Video Signal: 0.5-1.0 volts p-p
Input DDC Signal: EX-1UTP-IR-50 5 volts p-p TTL (Transmier), 5 volts p-p TTL (Receiver)
EX-1UTP-IR-50-POH 12 volts p-p TTL (Transmier), 5 volts p-p TTL (Receiver)
Maximum Single Link Range: 1080p 36bit colour depth
HDMI Transmission distance: 1080p signal up to 15m/ 49 HDMI
Video Format Supported: VESA: 640x480, 800x600, 1024x768, 1280x1024, 1600x1200,
1920x1080, 1920x1200 DTV/HDTV: 480i/576i/480p/576p/720p/
1080i/1080p
Output Video: HDMI 1.4+HDCP (Sync mirrors source), including 3D - frame packing/
sequenal (Blu-Ray) and Stereoscopic (Satellite/Cable broadcasts)
Maximum Cat5e/6 transmission 1080p signal up to 50m / 164 (Under perfect transmission condions including
distance: straight cable runs with no electrical interference, bends, kinks, patch panels or wall outlets.)
Power Consumpon: EX-1UTP-IR-50 2.5 Was (Transmier) 5 Was (Receiver)
EX-1UTP-IR-50-POH 15 Was (Transmier) 5 Was (Receiver) -
power drawn from Transmier or mains
BTU Rang (Brish Thermal Unit): EX-1UTP-IR-50 25.59 EX-1UTP-IR-50-POH 51.02

WARNING

To reduce the risk of re, electric shock

or product damage:

FEATURES AND SAFETY PRECAUTIONS

3. Safety Precautions

WARNING

To reduce the risk of fire, electric shock
or product damage:

• Protection against ESD (electrostatic discharge) included within

the unit to further stabilise transmission.

• LED indications for clear power and video signal selection.

• 5v mains supply included but receivers may be powered through the

USB port of the display using Wyrestorm USB to 5v power adaptor)

• Fully cascadable to further lengthen transmission.

*NOTE: ideal conditions denote cable run is within
specified distance range of product, no electrical
interference, the use of straight cable runs with no bends
or kinks and no patch panels or wall outlets used. Please
be advised that the presence of any of these factors in
your installation may compromise bandwidth and signal
strength. For longer transmission distances, RS232 control
and Ethernet pass-through, please see our full HDBaseT
or HDBT Lite range of matrices, transmitters, receivers and
extender sets.

USB to 5V Cable

Part Number

CAB-USB-5V

Technical Support: [e-mail] US: [phone] EU: [phone]

4

6i. Panel Description - EX-1UTP-IR-50 Transmitter

PANEL DESCRIPTION - TRANSMITTER

10

9

8

3

6

1

4

7

2

5

8

9

10

EDID management – see Transmitter EDID Settings
for details (section 9)

IR RX Input – 3.5mm IR Receiver placed at display
location to remotely control the source device.

IR TX Output – 3.5mm IR Transmitter connecting to
source device for control from display location.

Signal LINK status – LED lit when signal detected

HDBaseT OUTPUT

Power indication – LED lit when powered

5v Power Input

Ground Point

HDMI INPUT

EDID DIP Switch settings printed on base of
Transmitter

1

2 3

4

5

6

7

Technical Support: [e-mail] US: [phone] EU: [phone]

5

Panel Description - EX-1UTP-IR-50 Receiver

PANEL DESCRIPTION - RECEIVER

1

2 3

4

5

6

7

9

8

10

Distance SETTING - see Receiver distance Settings
for details (section 9)

IR RX Input – 3.5mm IR Receiver placed at display
location to remotely control the source device.

IR TX Output – 3.5mm IR Transmitter connecting to
source device for control from display location.

Signal LINK status – LED lit when signal detected

HDBaseT INPUT

Power indication – LED lit when powered

5v Power Input

Ground Point

HDMI OUTPUT

SETTING DIP Switch settings printed on base of
Receiver

3

6

1

4

7

2

5

8

9

10

SETTING