Wyrestorm EX-1UTP-IR-100-EDID, EX-1UTP-IR-100-POH Instruction Manual

1

Technical Support: [e-mail] US: [phone] EU: [phone]

Instruction Manual

Thank you for choosing this Wyrestorm product.

Please read these instructions carefully before installing to avoid complications later.

Wyrestorm Extender Set
Solutions

Part Number EX-1UTP-IR-100-EDID

Part Number EX-1UTP-IR-100-POH

HDMI® Extension over Cat5e/6/7 with Full HDBaseT™
up to 100m incl. bidirectional IR control, RS232 1:2
HDMI splitting capabilities, EDID management and
Power-over-HDBaseT*

2

Technical Support: [e-mail] US: [phone] EU: [phone]

Contents 1. Introduction

CONTENTS AND INTRODUCTION

Wyrestorm HDBaseT™ extender sets comprise of
a transmitter and receiver to lengthen distribution
of uncompressed 1080p HD video @60Hz and
HD multi-channel audio, high speed internet and
control up to 100m (328ft) via single category
cable, regardless of HDCP source encryption.

The EX-1UTP-100-POH and EX-1UTP-IR-100-EDID
extenders retain the rock-solid reliability of HDBaseT™
transmission technology with bidirectional control of
source and display from either location via IR and
RS232. Both models contain EDID management to
manually handle device communication issues during
installation and include the added advantage of 1:2
splitting capabilities to duplicate the receiver HDMI
output, allowing connection to an additional display or
projector.

Ethernet pass-through allow both models to be fully
cascaded up to 7 times to further expand distribution,
while the EX-1UTP-100-POH also features Power­over-HDBaseT to enable true 5-play convergence
for distribution of video, audio, control, Ethernet and
Power through a single Cat5e/6 cable.

Wyrestorm HDBaseT™ extenders offer incredible

exibility and stability of signal distribution combined

with innovative features and an ease of use that
provides solutions where stable HD transmission
and control over distance is required, whilst also
eliminating the need for additional control and video
cables on installation, whether in a residential or
commercial setting.

For further information on this product and other
Wyrestorm ranges, visit our website or download our
latest product guide. www.wyrestorm.com

Introduction

Features

Safety Precautions

Packaging Contents

Connection & Operation

Typical Applications

Updating RS232 Settings on the

EX-1UTP-IR-100-POH Receiver

EDID & Upgrade Switcher Instruction

Specication

i. EX-1UTP-IR-100-EDID

ii.EX-1UTP-IR-100-POH

Maintenance

Product Service

Panel Descriptions

i. EX-1UTP-IR-100-POH Transmitter

ii. EX-1UTP-IR-100-POH Receiver

iii. EX-1UTP-IR-100-EDID Transmitter

iv. EX-1UTP-IR-100-EDID Receiver

1

2

3

4

5

6

7

8

9

10

11

12

13

Mail In Service

Warranty

Warranty Limits and Exclusions

Installation Test Notes

14

15

16

Part Number EX-1UTP-IR-100-EDID

Part Number EX-1UTP-IR-100-POH

3

Technical Support: [e-mail] US: [phone] EU: [phone]

2. Features 3. Safety Precautions

FEATURES AND SAFETY PRECAUTIONS

• True 5 play convergence realised with the inclusion

of Power-over-HDBaseT for distribution of video,
audio, control, Ethernet and now Power to be
passed between transmitters and receivers along a
single Cat5e/6/7 cable. (EX-1UTP-IR-100-POH only)

• EDID management is also included for the further

aid communication between connected devices and
allow custom settings to tailor the installation to the
requirements of the devices connected.

• For added exibility, 1:2 HDMI® splitting capabilities

have been added to double your simultaneous
outputs, allowing for extra display or projector
connection.

• Single cable solution for extension of full HD audio/

video, RS232, 2-Way IR and 10/100 Ethernet

• Robust HDBaseT transmission technology far more

stable and resistant to electrostatic interference
than conventional HD distribution over UTP

• HDMI v1.4 with full 3D compatibility - frame

packing/sequential (Blu-Ray) and interlaced
Stereoscopic (satellite/cable broadcasts)

• Supports all high denition resolutions: 1080p,
1080i, 720p and screen refresh rates of 24Hz,
30Hz, 50Hz and 60Hz

• 4k x 2k Resolution applications supported

• Fully supports 48bit Deep Colour

• Uncompressed HD and multi-channel audio

• Automatically adjusts feedback, equalisation and
amplication

• Supports constant HDCP to prevent screen drop-

outs when operating devices

• Control signals can be sent between source device

and display via 2-way IR

• 1080p up to 100m (328ft) range using Cat5e/6/7

UTP (including 3D applications) - control of source
and display possible from either location

• 10/100 BaseT Ethernet

• Can be cascaded up to 7 times (700m / 2300ft)

• HDCP compliant

• 10.2Gbps bandwidth output capacity

• RS232 compatible with open source drivers/

protocols available for market leading third party
control systems

1. Do not expose this apparatus to rain, moisture,
sprays, drips or splashes and ensure that no
objects containing liquids are placed on the
apparatus, including cups, glasses and vases.

2. Do not place this unit in a conned space such as

enclosed shelving, cabinets or bookshelves.
Ensure the unit is adequately ventilated.

3. To prevent the risk of electric shock or re hazard

due to overheating, do not cover the unit or
obstruct ventilation openings with material,
newspaper, cardboard or anything that may restrict

airow into the unit.

4. Do not install near external heat sources such as

radiators, heat registers, boilers or any device that

produces heat such as ampliers or computers and
do not place near sources of naked ame.

5. Unplug apparatus from power supply during
lightening storms or when unused for long periods
of time.

6. Protect the power cable from being walked on,
pinched or restricted in any way, especially at plug
connections.

7. Only use attachments/accessories specied by the

manufacturer.

8. Units contain non-servicable parts - Refer all
servicing to qualied service personnel.

WARNING

To reduce the risk of re, electric shock

or product damage:

FEATURES AND SAFETY PRECAUTIONS

3. Safety Precautions

WARNING

To reduce the risk of fire, electric shock
or product damage:

• Protection against ESD (electrostatic discharge) included within

the unit to further stabilise transmission.

• LED indications for clear power and video signal selection.

• 5v mains supply included but receivers may be powered through the

USB port of the display using Wyrestorm USB to 5v power adaptor)

• Fully cascadable to further lengthen transmission.

*NOTE: ideal conditions denote cable run is within
specified distance range of product, no electrical
interference, the use of straight cable runs with no bends
or kinks and no patch panels or wall outlets used. Please
be advised that the presence of any of these factors in
your installation may compromise bandwidth and signal
strength. For longer transmission distances, RS232 control
and Ethernet pass-through, please see our full HDBaseT
or HDBT Lite range of matrices, transmitters, receivers and
extender sets.

USB to 5V Cable

Part Number

CAB-USB-5V

4

Technical Support: [e-mail] US: [phone] EU: [phone]

12

4. Package Contents

5i. EX-1UTP-IR-100-POH Transmitter

EX-1UTP-IR-100-EDID

• 1 x Wyrestorm TRANSMITTER

• 1 x Wyrestorm RECEIVER

• 1 x Printed installation guide (also downloadable from

website product page)

• 2 x pairs of mounting brackets

• 2 x 5vDC power supply

• 1 x wide-band IR TX Emitter (small/round) for

attachment to Input device

• 1 x wide-band IR RX Receiver (larger/rectangular) for

attachment to Display - IR frequency range:

30KHz to 56KHz

EX-1UTP-IR-100-POH

• 1 x Wyrestorm TRANSMITTER

• 1 x Wyrestorm RECEIVER

• 1 x Printed installation guide (also downloadable from

website product page)

• 2 x pairs of mounting brackets

• 1 x 12vDC power supply

• 1 x wide-band IR TX Emitter (small/round) for

attachment to Input device

• 1 x wide-band IR RX Receiver (larger/rectangular) for

attachment to Display - IR frequency range:

30KHz to 56KHz

1

2

3

4

5

7

6

8

10

9

11

RS232 Port

HDMI Input with LED Active Signal Indicator (Lit for active)

Duplicate HDMI output with LED Active Signal Indicator (Lit for active)

EDID DIP Switch with Upgrade Switcher

TCP/IP Connector

IR TX Transmitter port

IR RX Receiver port

LED HDBT Link Indicator (Lit for active)

HDBT Out

LED 5v DC Power Indicator (Lit for powered)

DC 5V Power Input

9 10 112 3 641 75 8

PACkAGE CONTENTS AND EX-1UTP-IR-100-POH TRANSMITTER

UTP