Wyred 4 Sound STmkII User Manual

Wyred 4 Sound

ST

mkII

Stereo Amplifier Owner’s Manual

**IMPORTANT**

Check position of AC mains switch prior to

connecting the unit to a power source

©Wyred 4 Sound 2014

All rights reserved.

v1

.

Table of Contents

Safety Guidelines 1-2

Register Your Product 3

READ FIRST Important 3

Package Contents 3

Introduction 4

Design and Feature Overview 4-5

AC Mains Voltage Switch 5

Getting Connected 5-6

Powering your Integrated Amplifier 6

“Break-In” Period 6

RCA/XLR Input Select 6-7

DC Trigger 7

Back Panel Diagram 7

Troubleshooting 8

Got Hum? 8-9

Warranty Coverage 10-11

Service 12

Specifications 13

Safety Guidelines

1. Read these instructions – All the safety and operating instructions should be

read before this product is operated.

2. Keep these instructions – The safety and operating instructions should be

retained for future reference.

3. Heed all warnings – All warnings on the appliance and in the operating

instructions should be adhered to.

4. Follow all instructions.

5. Do not use this apparatus near water – The appliance should not be used

near water or moisture – for example, in a wet basement or near a swimming
pool, and the like.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding plug. A

polarized plug has two blades with one wider than the other. A grounding plug
has two blades and a third grounding prong. The wide blade or the third prong
is provided for your safety. If the provided plug does not fit your outlet, consult
an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at the

plugs, convenience receptacles, and at the point where they exit from the
apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by

the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods

of time.

14. Refer all servicing to qualified personnel. Servicing is required when the

apparatus has been damaged in any way such as the power cord or plug is
damaged. Other damage may occur if liquid or objects have been dropped or
spilled into the apparatus. Dropping the apparatus, exposure to rain, and
excessive moisture may cause additional damage.

15. Please keep the unit in a good ventilation environment.

16. CAUTION: These servicing instructions are for use by qualified service

personnel only. To reduce the risk of electric shock, do not perform any
servicing other than that contained in the operating instructions unless you are
qualified to do so.

pg. 1

17. WARNING: To reduce the risk of electric shock, do not expose this apparatus to

rain or moisture. The apparatus shall not be exposed to dripping or splashing
and that objects filled with liquids, such as vases, shall not be placed on
apparatus.

18. WARNING: The mains plug/appliance coupler is used as disconnect device, the

disconnect device shall remain readily operable.

19. - The lightning flash with arrowhead symbol within an equilateral triangle is

intended to alert the user to the presence of non-insulated “dangerous
voltage” within the products enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.

- The exclamation point within an equilateral triangle is intended to alert the
user to presence of important operating and maintenance instructions in the
literature accompanying the appliance.

20. No naked flame sources, such as lighted candles, should be placed on the

apparatus.

21. WARNING: The terminals marked with symbol of “+/-“ may be of sufficient

magnitude to constitute a risk of electric shock. The external wiring connected
to the terminals requires installation by an instructed person or the use of
readymade insulated leads or cords.

22. Correct Disposal of this product. This marking indicates that this

product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment

or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmental safe recycling.

pg. 2

Register Your Product!

It is very important to complete the warranty registration form located on our

website. You MUST complete and submit the form within 30 days of purchase to
activate your warranty. When you navigate to our website there is a tab called
“Support” that will lead you to the warranty registration form which needs to be
filled out and submitted.

**Keep your packaging! It is custom made for your unit and will effectively protect it for

possible future use.**

READ FIRST Important

Please read the entire manual before connecting this product to any other

component. This manual contains detailed information regarding the design,
operation and features of the Wyred 4 Sound ST
misuse or failure to properly follow instructions will not be covered under warranty.
See “Warranty” for an in depth understanding of warranty restrictions regarding this
product.

mkII amplifier. Damage due to

**Caution**

The STmkII has external AC mains voltage selection that must be
properly configured before connecting to AC power. Any

damage as a result of failure to set the voltage switch properly is
not covered under warranty. Please refer to the “AC Mains Voltage switch”
section in the manual for the fuse value and configuration instructions.

Unpack carefully

mkII packaging contains:

The ST

• 1 – Owners Manual

• 1 – 6’ AC Power Cable

• 1 –3.5mm mono trigger cable

• 1 – ST

mkII Stereo amplifier

pg. 3