Wyred 4 Sound MC 7150 User Manual
Wyred 4 Sound
MC 7150
MC 7150 Owner’s Manual
**IMPORTANT**
Check position of AC mains switch prior to
connecting the unit to a power source
©Wyred 4 Sound 2013
All rights reserved.
v1.1
.
Table of Contents
Register Your Product 1
READ FIRST Important 1
Package Contents 1
Introduction 2
Design and Feature Overview 2-3
AC Mains Voltage Switch 3
Getting Connected 3
Powering your Integrated Amplifier 4
“Break-In” Period 4
DC Trigger 4
Back Panel Diagram 5
Troubleshooting 5-6
Got Hum? 6
Warranty Coverage 7-8
Service 9
Specifications 10
Register Your Product!
It is very important to complete the warranty registration form located on our
website. You MUST complete and submit the form within 30 days of purchase to
activate your warranty. When you navigate to our website there is a tab called
“Register Products” that will allow you to fill out and submit the form.
**Keep your packaging! It is custom made for your unit and will effectively protect it for
possible future use.**
Important
Please read the entire manual before connecting this product to any existing
components for detailed information regarding the design, operation and features
of your Wyred 4 Sound MC 7150. Damage due to misuse or failure to properly follow
instructions will not be covered under warranty. See “Warranty” for an in depth
understanding of warranty restrictions regarding this product.
**Caution**
The MC 7150 has an external AC mains switch that must be properly
configured before connecting to AC power. Any damage as a result of failure to set
the switch properly is not covered under warranty. Please refer to the “AC Mains
Voltage switch” section in the manual for the fuse value and configuration
instructions.
Unpack carefully
The MC 7150 packaging contains:
• 1 – Owners Manual
• 1 – 6’ AC Power Cable
• 1 –3.5mm mono trigger cable
• 1 – MC 7150 multi-channel amplifier
pg. 1
Introduction
Wyred 4 Sound amplifiers replicate recordings with superb precision and
trueness. During the development process we carefully tune each of our products to
represent the W4S sonic signature which is no easy task! To ensure that your amp is
operating at 100% in all respects we use strict testing regiments with premium grade
Audio Precision equipment. Look no further for the culmination of performance and
efficiency. In addition to the quality of our products, you will come to love our
responsive and professional customer service.
Design and Feature Overview
The MC 7150 is a high performance multi-channel amp in a package that is
attractive, functional and powerful. With over 90% efficiency, Class D technology has
allowed us to develop and amp that will effectively enhance your music and movie
experience! In addition to having a more “Green” approach to powering your
system, this efficiency rating means very little power is wasted. Entertainment
systems are often constructed with small cabinets which are not designed for
inefficient components that require ample ventilation and this is where the MC 7150
comes in! The MC 7150 is able to operate in tight enclosures without creating
excessive heat so you can choose the entertainment center you prefer, rather than
the one you are forced to buy.
The traditional application for this amplifier is a 7 channel home theater
system but it can also be very successful running 5 channels with the mains in a biamped configuration. Power is delivered to the speakers through 14AWG OFC wiring
connected to gold plated, insulated 5-way binding posts. Power consumption when
in standby is less than 0.5w so you can be sure it’s easy on the wallet! A 12V DC
trigger input jack located on the rear panel will allow you to easily put the unit in
standby when connected to the trigger output of a processor.
The lower portion of the rear panel is lined with 7 RCA jacks that feed into a
refined version of our 2
this amp allows for optimum results when using the tuning features of your
processor such as room correction or audio equalization. Another great point worth
noting is that you can operate any number of channels and those which are unused
will consume a negligible amount of power.
The new chassis is more striking than ever! When looking at the front of the
unit, only three screws are visible which are tucked neatly along the rear edge of the
top cover. We have added a machined front panel cut from a solid piece of 1”
aluminum and finished it with a smooth black powder coat. Two color options are
nd
generation MC input buffer. The neutral sonic character of
pg. 2
Loading...