Wyred 4 Sound DSDse Pure User Manual

Wyred 4 Sound

Pure Music Quick Setup Guide

This guide will assist you to configure Pure Music for optimum performance with the

DAC-2 DSD and DSDse. Please follow the steps below and refer to the screenshots for visual

assistance.

*Please note: Pure Music does not require that you set the output device in the Audio MIDI player*

1. Launch Pure Music by clicking the icon on your dock. It is also possible that the icon for

Pure Music is located in your applications folder. Once Pure Music is launched, it will

automatically open iTunes. After the program opens you should see the screen below.

For optimum performance we suggest that you enable Memory Play by clicking the

button on the lower left side of the window. It will illuminate green once it is activated.

2. Next, you will need to configure the output device. Click in the top portion of the Pure

Music menu at which point you will see Pure Music listed on the top bar of your Mac

desktop next to the apple. Click on Pure Music and select Audio Setup from the drop

down menu to launch the audio settings menu. Please see image below.

3. After launching the Audio setup, you will need to select the DAC as the output device.

Use the drop down menu and select 32bit 384kHz DSD Interface from the drop down

menu. Next, select Click to Apply Changes (Application Will Relaunch) which is located

near the bottom of the window and Pure Music will shut down and then re-open. At this

point, the DAC is now selected as the output device.