WynMax WMIX-D25503 User Manual
WMIX-D25503 Intel Atom D2550
User Manual Rev. 01, Jul, 2012
2
All rights reserved. No part of this publication may be reproduced in any form or by
any means, without prior written permission of the publisher.
All trademarks are the properties of the respective owners.
All product specifications are subject to change without prior notice.
□ WMIX-D25503
□ Driver CD (Include user manual)
□ 1 x COM Port Cable
□ 1 x SATA Cable
□ 1 x SATA Power Cable
□ 1 x CD Driver
Ordering Information
Packing List
Statement
3
Contents
Chapter 1 Product Information ................................................................................................. .5
1.1 Block Diagram ............................................................................................................. 5
1.2 Features ........................................................................................................................ 6
1.3 PCB Layout .................................................................................................................. 9
1.4 Jumper Setting ........................................................................................................... 10
1.5 Connector Function List ............................................................................................ 15
1.6 Internal Connector Pin Define ................................................................................... 16
Chapter 2 BIOS Setup .............................................................................................................. 23
2.1 Main Menu ................................................................................................................. 23
2.2 Advanced Menu ......................................................................................................... 24
2.3 PCI Subsystem Setting ............................................................................................... 25
2.4 Advanced BIOS Feature Setup .................................................................................. 26
2.5 CPU Configuration .................................................................................................... 27
2.6 SATA Configuration ................................................................................................... 28
2.7 USB Configuration .................................................................................................... 29
2.8 Super IO Configuration .............................................................................................. 31
2.9 Serial Port 0 Configuration ........................................................................................ 32
2.10 Serial Port 1 Configuration ...................................................................................... 33
2.11 Parallel Port Configuration ...................................................................................... 34
2.12 Pc Health Status ....................................................................................................... 35
2.13 Serial Super IO Configuration ................................................................................. 36
2.14 Serial Port Configuration ......................................................................................... 37
2.15 Chipset ..................................................................................................................... 41
2.16 Memory Information ................................................................................................ 42
2.17 Chipset Configuration .............................................................................................. 43
2.18 Intel IGD Configuration ........................................................................................... 44
2.19 PCI Express Root Ports Configuration .................................................................... 46
2.20 USB Mode ............................................................................................................... 47
2.21 PCI Express Ports Configuration ............................................................................. 49
2.22 Boot Configuration .................................................................................................. 51
2.23 Password Description............................................................................................... 53
2.24 Save Changes and Exit ............................................................................................. 54
Chapter 3 Drivers Installation .................................................................................................. 55
3.1 Intel Chipset Device Software ................................................................................... 55
3.2 Intel Graphic Media Accelerator Driver .................................................................... 58
3.3 LAN Driver ................................................................................................................ 60
4
3.4 Audio Driver .............................................................................................................. 63
Appendix-A Watchdog ............................................................................................................. 64
Appendix-B GPIO ................................................................................................................... 66
5
Intel
DMI 4 Lanes for D2xxx S eries
DDR3 800/1066MHz
LPC I/F
NM10
Intel
SO-DIMM x1
CK-NET
SM Bus
SM Bus
2MOCSM&BKLPT
SPI SIO_W83627EHG
USB 2.0 x6
SATA x2
COM1 COM3 COM4 COM5 COM6
SPI
UART_ F81216DG
VGA
CH7511B
DIO
ATOM Processor
D2550
HDA_ALC269Q
HD Audio
LAN_RTL8111E
PCIe x1
Mini-PCIe Slot
PCIe x1
SATA
USB 2.0
VRD12/IMVP7
eDP/DP
LVDS 18/24bit SC/DC
DMI 2 Lanes for N2xxx S eries
Block Diagram
6
System
Processor/Chipset
Processor
Intel ATOM processors D2550 BGA
Chipset
NM10
BIOS AMI
Memory
Technology Single channel DDR3 1066 MHz SO-DIMM
Max. Capacity Up to 4GB DDR3 DRAM
Socket 1 x DDR3 SO-DIMM
Display
Chipset Intel D2550 integrated
VRAM Shared with system memory
Resolution Analog Display: Up to 1920 x 1200
LVDS
Resolution
Digital LVDS: 24Bit LVDS
Dual Channel Up to 1920x1200
Dual Display CRT + LVDS
Ethernet
Interface 10/100/1000 Mbps
Controller LAN: Realtek 8111E
Audio
Interface High Definition Audio
Controller Realtek ALC269 HD CODEC
SATA
Max. Data
Transfer Rate
300 MB/s
Port 2
Expansion Slot Mini-PCIE 1
Features
7
Onboard
Connector
USB 2.0 2
DIO
2 in/2 out (1 DI by pin heater, 1 DI/2 DO for
cash drawer)
COM
3xRS232,1xRS232/RS422/RS485, all supply
5V & 12V
Audio 1 (Line In, Line out, Mic In)
LVDS
1
VGA
1
FAN
1x CPU FAN, 1xSYSTEM FAN
MCR 1
SATA 2x SATA Slot
SATA Power 2
Rear I/O
PS/2 1
VGA 1
COM 1xD-SUB 9, 1xRJ45
DC 12V IN 1
DC 12V
Output
1
USB 2.0
4
LAN 1
Parallel 1
Cash Drawer 1
Line out 1
Power
DC 12V Input DC 12V Jack, DC 12V 4Pin connector
DC 12V
Output
DC 12V Jack
Watchdog Timer
Interval Programmable 1~255 sec.
Output Sytstem reset
8
Environment
Operating
Temp.
-5°C~60°C (23°F~140°F)
Storage
Temp.
-20°C~80°C (-4°F~175°F)
Relative
Humidity
0%~95% (non-condensing)
Form Factor
Dimension
(LxW)
170mm x 170mm (6.69"x6.69")
9
JLVDS_SEL
LCD
INV
JLVDS
CPUFAN
PWR2
PWR1
DC_OUT
USB2_LAN
VGA_COM2
VGA2
JCOM2_SEL
JCOM2
JVFD_SEL
USB1_COM4
JCOM4
MCR
DIO
KB_MS
CASH_DRAWER
AUDIO1
LPT
JLPC
AUDIO2
SPK_OUT
JPWR_SEL
COM1
JCOM1
COM6
JCOM6
COM5
JCOM5
COM3
JCOM3
USB3
JFRONT
BZ
JSPI
BAT
JCMOS
SATA1
SATA_PWR
SATA2
SYSFAN
U17
RT2
MINI-PCIE
U4
SO-DIMM1
PCB Layout
10
JCOM1/JCOM2/JCOM3/JCOM4/JCOM5/JCOM6: (5V/12V/RI) Select
Pin No. 1-2 3-4 5-6
Function +5V Modem Ring In
(Default)
+12V
Jumper Setting
JCOM2_SEL: COM2(RS-232/RS-422/RS-485) Select(1/3)
Pin No. 5-6, 11-13, 12-14, 19-21, 20-22 3-4, 9-11, 10-12, 17-19, 18-20
Function RS-232 (Default) RS-422
Jumper
Setting
JCOM2_SEL: COM2(RS-232/RS-422/RS-485) Select(2/3)
Pin No. 1-2, 9-11, 10-12, 23-24 15-16
Function RS-485 RS-422 RX 100Ω Termination
Jumper
Setting
Jumper Setting
6 4 2
5 3 1
6 4 2
5 3 1
6 4 2
5 3 1
6 4 2
5 3 1
6 4 2
5 3 1
6 4 2
5 3 1
23 1
24 2
23 1
24 2
23 1
24 2
23 1
24 2
23 1
24 2
23 1
24 2
23 1
24 2
23 1
24 2
11
JCOM2_SEL: COM2(RS-232/RS-422/RS-485) Select(3/3)
Pin No. 7-8
Function RS-422 TX 100Ω/RS-485
Termination
Jumper
Setting
Note: Not recommended for RS-422 TX 100Ω termination.
JCMOS: CMOS Clear
Pin No. 1-2 2-3
Function Normal Operation (Default) Clear CMOS Contents
Jumper
Setting
JLVDS: LCD Power (+3.3V/+5V) Select
Pin No. 1-2 2-3
Function LCD Power +3.3V (Default) LCD Power +5V
Jumper
Setting
3
2
1
3
2
1
3
2
1
3
2
1
23 1
24 2
23 1
24 2
3
2
1
3
2
1
3
2
1
3
2
1
12
JLVDS_SEL: LVDS Panel Type Select
Pin No. Jumper Setting LVDS Panel Type
1-2, 3-4, 5-6, 7-8
(0000)
1 3 5 7
2 4 6 8
800*600/18bit
Single Channel
3-4, 5-6, 7-8
(1000)
1 3 5 7
2 4 6 8
1024*768/18bit
Single Channel
1-2, 5-6, 7-8
(0100)
1 3 5 7
2 4 6 8
1024*768/24bit
Single Channel
5-6, 7-8
(1100)
1 3 5 7
2 4 6 8
1280*768/18bit
Single Channel
1-2, 3-4, 7-8
(0010)
1 3 5 7
2 4 6 8
1280*800/18bit
Single Channel
3-4, 7-8
(1010)
1 3 5 7
2 4 6 8
1280*960/18bit
Single Channel
1-2, 7-8
(0110)
1 3 5 7
2 4 6 8
1280*1024/24bit
Dual Channel
7-8
(1110)
1 3 5 7
2 4 6 8
1366*768/18bit
Single Channel
1-2, 3-4, 5-6
(0001)
1 3 5 7
2 4 6 8
1366*768/24bit
Single Channel
13
3-4, 5-6
(1001)
1 3 5 7
2 4 6 8
1440*900/24bit
Dual Channel
1-2, 5-6
(0101)
2 4 6 8
1 3 5 7
2 4 6 8
1 3 5 7
1400*1050/24bit
Dual Channel
5-6
(1101)
1 3 5 7
2 4 6 8
1600*900/24bit
Dual Channel
1-2, 3-4
(0011)
1 3 5 7
2 4 6 8
1680*1050/24bit
Dual Channel
3-4
(1011)
1 3 5 7
2 4 6 8
1600*1200/24bit
Dual Channel
1-2
(0111)
1 3 5 7
2 4 6 8
1920*1080/24bit
Dual Channel
NC
(1111)
1 3 5 7
2 4 6 8
1920*1200/24bit
Dual Channel
JPWR_SEL: AT/ATX Mode Select
Pin No. 1-2 2-3
Function AT Mode ATX Mode (Default)
Jumper
Setting
3
2
1
3
2
1
3
2
1
3
2
1
14
JVFD_SEL: COM4 of RS232 or VFD Select
Pin No. 1-3, 2-4 1-2, 3-5, 4-6
Function RS232 Mode (Default) VFD Mode
Jumper Setting
1 3 5
2 4 6
1 3 5
2 4 6
1 3 5
2 4 6
15
Connector Function Note
AUDIO1
Line-out connector
AUDIO2
MIC-in & Line-in connector
CASH_DRAWER Cash Drawer with RJ11-6P6C connector
COM1/3/5/6 Serial port with Box-header
CPUFAN
CPUFAN 4-pin connector
DC-Out
DC Power Jack 2Pin (+12V, 2A)
DIO
Digital Input with Pin-header
INV
LCD inverter connector
JFRONT
Front Panel with Pin-header
KB_MS PS2 Keyboard and PS2 Mouse connector
LCD2
LVDS Dual Chanel 24bit connector
LPT Parallel Port with Dsub
MCR
MCR with Box-header
MINI-PCIE
Mini PCI Express connector
PWR1
DC Power Jack 4Pin connector
PWR2
ATX 2x2Pin Power connector
SATA1
SATA7Pin connector
SATA2
SATA7Pin+Power15Pin connector
SATA_PWR
SATA Power with Box-header
SO-DIMM1
DDR3 SO-DIMM connector
JSPI
Reserved for debug
SPK_OUT
Speaker-out with Box-header
SYSFAN
System FAN connector
USB1_COM4
USBx2 and RJ45 (COM4) connector
USB2_LAN
USBx2 and RJ45 connector
USB3
USBx2 Port with Pin-header (2.54mm)
VGA1_COM2
VGA and serial port connector
VGA2
VGA with Box-header
Connector Function List
16
AUDIO1: Line-out with Audio Phone Jack
1
2
3
4
5
Pin No. Signal
1 Audio Ground
2 Audio-out-L
3 Audio Ground
4 Jack Plugged detect
5 Audio-out-R
AUDIO2: MIC-in & Line-in with with Box-header (2.0mm)
12
78
Pin No. Signal Pin No. Signal
1 MIC-In-L 2 Line-in-L
3 MIC Jack detect 4 Line-in Jack detect
5 Audio Ground 6 Audio Ground
7 MIC-In-R 8 Line-in-R
CASH_DRAWER: Digital IO with RJ-11-6P6C connector
1
2
5
6
Pin No. Signal
1 Ground
2 DIO_Out1 (bit1)
3 +12V
4 DIO_IN0 (bit4)
5 DIO_Out0 (bit0)
6 Ground
Internal Connector Pin Define
17
USB1_COM4: USB1/2 & COM4 with Dual USB & RJ45
U1U1
U4
U5
L2
L1
L
7
L8
U8
Pin No. Signal Description Pin No. Signal Description
U1 +5V U5 +5V
U2 USBDATA2- U6 USBDATA3-
U3 USBDATA2+ U7 USBDATA3+
U4 Ground U8 Ground
L1 RI/+5V/+12V L5 DTR
L2 CTS/+5V/+12V L6 DSR
L3 Ground L7 TXD
L4 RTS/ Ground L8 RXD
COM1/3/5/6: Serial Port with Box-header (2.0mm)
1
2
9
10
Pin No. Signal Pin No. Signal
1 DCD 2 DSR
3 RXD 4 RTS
5 TXD 6 CTS
7 DTR
8,10 RI/+5V/+12V
9 Ground
CPUFAN: 4Pin FAN connector
1
4
Pin No. Signal
1 Ground
2 Fan Power (+12V)
3 Speed Sense
4 Control
INV: Inverter with Box-header (2.50mm)
1
5
Pin No. Signal
1 +12V
2 +12V
3 Ground
4 Inverter Backlight Control
5 Inverter Backlight Enable
18
JFRONT: Front Panel with Pin-header (2.54mm)
1
2
9
10
Pin No. Signal Pin No. Signal
1 PWR LED - 2 +5V Power LED
3 PWR_SW 4 Ground
(Power ON Button Pin2)
5 Sus LED - 6 5VSB (470 Ohm),
(Sus LED +)
7 HDD LED - 8 HDD LED +
9 RESET# 10 Ground
KB_MS: PS2 Keyboard and PS2 Mouse connector (PS2 Y-cable)
P1P2
P3P4
P6 P5
Pin No. Signal
1 PS2 Keyboard Data
2 PS2 Mouse Data
3 PS2 Ground
4 PS2 Power (+5V)
5 PS2 Keyboard Clock
6 PS2 Mouse Clock
19
LCD: LVDS 24bit Panel Signal with Box-header (1.0mm)
1
2
30
9
Pin No. Signal Pin No. Signal
1 Ground 2 Ground
3 LA_DC0P 4 LA_DC0N
5 LA_DC1P 6 LA_DC1N
7 LA_DC2P 8 LA_DC2N
9 LA_CLKP 10 LA_CLKN
11 LA_DC3P 12 LA_DC3N
13 Ground 14 Ground
15 LB_DC0P 16 LB_DC0N
17 LB_DC1P 18 LB_DC1N
19 LB_DC2P 20 LB_DC2N
21 LB_CLKP 22 LB_CLKN
23 LB_DC3P 24 LB_DC3N
25 Ground 26 Ground
27 LVDS Power 28 LVDS Power
29 LVDS Power 30 LVDS Power
Note1: LVDS Power = +5V or +3.3V (Default)
LPT: Parallel Port with D-sub 25Pin
1
14
13
25
Pin No. Signal Pin No. Signal
1 Strobe# 14 Auto Form Feed#
2 Data 0 15 Error#
3 Data 1 16 Initialization#
4 Data 2 17 Printer Select IN#
5 Data 3 18 Ground
6 Data 4 19 Ground
7 Data 5 20 Ground
8 Data 6 21 Ground
9 Data 7 22 Ground
10 Acknowledge# 23 Ground
11 Busy 24 Ground
12 Paper Empty 25 Ground
13 Printer Select
20
MCR: Internal Keyboard with Box-header (2.0mm)
1
6
Pin No. Signal
1 +5V
2 KCLK_CON
3 KCLK_KBC
4 KDAT_CON
5 KDAT_KBC
6 Ground
Note: If not use MCR need short (Pin2 to Pin3) and (Pin4 to Pin5) to
enable PS2 Keyboard.
PWR1: DC 2x2+12V Input
1
2
3
4
Pin No. Signal Pin No. Signal
1 Ground 2 +12V
3 Ground 4 +12V
PWR2: ATX 2x2+12V Input
1
2
3
4
Pin No. Signal Pin No. Signal
1 Ground 2 Ground
3 +12V 4 +12V
SATA_PWR: SATA Power with Box-header (2.50mm)
1
4
Pin N . Signal
1 +5V
2 Ground
3 Ground
4 +12V
21
SPK-Out: Speaker Output with Wafer connector (2.0mm)
1
4
Pin No. Signal
1 Speak Out Right+
2 Speak Out Right-
3 Speak Out Left-
4 Speak Out Left+
SYSFAN: System FAN 3 Pin connector
1
3
Pin No. Signal
1 Ground
2 Fan Power (+12V)
3 Speed Sense
USB3: USB3/4 Port with Pin-header (2.54mm)
1
2
10
7
Pin No. Signal Pin No. Signal
1 USB Power (+5V) 2 USB Power (+5V)
3 USB DATA4N 4 USB DATA5N
5 USB DATA4P 6 USB DATA5P
7 USB Ground 8 USB Ground
9 NC 10 Shield Ground
VGA2: VGA with Box-header (2.0mm)
12
1
9
10
Pin No. Signal Pin No. Signal
1 VGA_RED 2 VGA_DDC_DATA
3 VGA_GREEN 4 VGA_DDC_CLK
5 VGA_BLUE 6 Ground
7 VGA_ HSYNC 8 Ground
9 VGA_ VSYNC 10 Ground
Loading...